upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
"""Macros that implement bootstrapping for the upb code generator."""
|
|
|
|
|
|
|
|
|
|
load(
|
|
|
|
|
"//upb/cmake:build_defs.bzl",
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
"staleness_test",
|
|
|
|
|
)
|
|
|
|
|
load(
|
|
|
|
|
"//bazel:upb_proto_library.bzl",
|
|
|
|
|
"upb_proto_library",
|
|
|
|
|
)
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
|
|
|
|
|
_stages = ["_stage0", "_stage1", ""]
|
|
|
|
|
_protoc = "//:protoc"
|
|
|
|
|
_upbc_base = "//upb_generator:protoc-gen-"
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
|
|
|
|
|
# begin:google_only
|
|
|
|
|
# _is_google3 = True
|
|
|
|
|
# _extra_proto_path = ""
|
|
|
|
|
# end:google_only
|
|
|
|
|
|
|
|
|
|
# begin:github_only
|
|
|
|
|
_is_google3 = False
|
|
|
|
|
_extra_proto_path = "-I$$(dirname $(location @com_google_protobuf//:descriptor_proto_srcs))/../.. "
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
# end:github_only
|
|
|
|
|
|
|
|
|
|
def _upbc(generator, stage):
|
|
|
|
|
return _upbc_base + generator + _stages[stage]
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
|
|
|
|
|
def bootstrap_cc_library(name, visibility, deps, bootstrap_deps, **kwargs):
|
|
|
|
|
for stage in _stages:
|
|
|
|
|
stage_visibility = visibility if stage == "" else ["//upb_generator:__pkg__"]
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
native.cc_library(
|
|
|
|
|
name = name + stage,
|
|
|
|
|
deps = deps + [dep + stage for dep in bootstrap_deps],
|
|
|
|
|
visibility = stage_visibility,
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
def bootstrap_cc_binary(name, deps, bootstrap_deps, **kwargs):
|
|
|
|
|
for stage in _stages:
|
|
|
|
|
native.cc_binary(
|
|
|
|
|
name = name + stage,
|
|
|
|
|
deps = deps + [dep + stage for dep in bootstrap_deps],
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
def _generated_srcs_for_suffix(prefix, srcs, suffix):
|
|
|
|
|
return [prefix + "/" + src[:-len(".proto")] + suffix for src in srcs]
|
|
|
|
|
|
|
|
|
|
def _generated_srcs_for_generator(prefix, srcs, generator):
|
|
|
|
|
ret = _generated_srcs_for_suffix(prefix, srcs, ".{}.h".format(generator))
|
|
|
|
|
|
|
|
|
|
if not (generator == "upb" and prefix.endswith("stage1")):
|
|
|
|
|
ret += _generated_srcs_for_suffix(prefix, srcs, ".{}.c".format(generator))
|
|
|
|
|
return ret
|
|
|
|
|
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
def _generated_srcs(prefix, srcs):
|
|
|
|
|
return _generated_srcs_for_generator(prefix, srcs, "upb")
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
|
|
|
|
|
def _stage0_proto_staleness_test(name, base_dir, src_files, src_rules, strip_prefix):
|
|
|
|
|
native.genrule(
|
|
|
|
|
name = name + "_generate_bootstrap",
|
|
|
|
|
srcs = src_rules,
|
|
|
|
|
outs = _generated_srcs("bootstrap_generated_sources/" + base_dir + "stage0", src_files),
|
|
|
|
|
tools = [_protoc, _upbc("upb", 0)],
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
cmd =
|
|
|
|
|
"$(location " + _protoc + ") " +
|
|
|
|
|
"-I$(GENDIR)/" + strip_prefix + " " + _extra_proto_path +
|
|
|
|
|
"--plugin=protoc-gen-upb=$(location " + _upbc("upb", 0) + ") " +
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
"--upb_out=bootstrap_upb:$(@D)/bootstrap_generated_sources/" + base_dir + "stage0 " +
|
|
|
|
|
" ".join(src_files),
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
staleness_test(
|
|
|
|
|
name = name + "_staleness_test",
|
|
|
|
|
outs = _generated_srcs(base_dir + "stage0", src_files),
|
|
|
|
|
generated_pattern = "bootstrap_generated_sources/%s",
|
|
|
|
|
target_files = native.glob([base_dir + "stage0/**"]),
|
|
|
|
|
# To avoid skew problems for descriptor.proto/pluging.proto between
|
|
|
|
|
# GitHub repos. It's not critical that the checked-in protos are up to
|
|
|
|
|
# date for every change, they just needs to be complete enough to have
|
|
|
|
|
# everything needed by the code generator itself.
|
|
|
|
|
tags = ["manual"],
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
def _generate_stage1_proto(name, base_dir, src_files, src_rules, generator, kwargs):
|
|
|
|
|
native.genrule(
|
|
|
|
|
name = "gen_{}_{}_stage1".format(name, generator),
|
|
|
|
|
srcs = src_rules,
|
|
|
|
|
outs = _generated_srcs_for_generator(base_dir + "stage1", src_files, generator),
|
|
|
|
|
cmd = "$(location " + _protoc + ") " +
|
|
|
|
|
"--plugin=protoc-gen-" + generator +
|
|
|
|
|
"=$(location " + _upbc(generator, 0) + ") " + _extra_proto_path +
|
|
|
|
|
"--" + generator + "_out=$(RULEDIR)/" + base_dir + "stage1 " +
|
|
|
|
|
" ".join(src_files),
|
|
|
|
|
visibility = ["//upb_generator:__pkg__"],
|
|
|
|
|
tools = [
|
|
|
|
|
_protoc,
|
|
|
|
|
_upbc(generator, 0),
|
|
|
|
|
],
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
def bootstrap_upb_proto_library(
|
|
|
|
|
name,
|
|
|
|
|
base_dir,
|
|
|
|
|
google3_src_files,
|
|
|
|
|
google3_src_rules,
|
|
|
|
|
oss_src_files,
|
|
|
|
|
oss_src_rules,
|
|
|
|
|
oss_strip_prefix,
|
|
|
|
|
proto_lib_deps,
|
|
|
|
|
visibility,
|
|
|
|
|
deps = [],
|
|
|
|
|
**kwargs):
|
|
|
|
|
"""A version of upb_proto_library() that is augmented to allow for bootstrapping the compiler.
|
|
|
|
|
|
|
|
|
|
Args:
|
|
|
|
|
name: Name of this rule. This name will resolve to a upb_proto_library().
|
|
|
|
|
base_dir: The directory that all generated files should be placed under.
|
|
|
|
|
google3_src_files: Google3 filenames of .proto files that should be built by this rule.
|
|
|
|
|
The names should be relative to the depot base.
|
|
|
|
|
google3_src_rules: Target names of the Blaze rules that will provide these filenames.
|
|
|
|
|
oss_src_files: OSS filenames of .proto files that should be built by this rule.
|
|
|
|
|
oss_src_rules: Target names of the Bazel rules that will provide these filenames.
|
|
|
|
|
oss_strip_prefix: Prefix that should be stripped from OSS file names.
|
|
|
|
|
proto_lib_deps: proto_library() rules that we will use to build the protos when we are
|
|
|
|
|
not bootstrapping.
|
|
|
|
|
visibility: Visibility list for the final upb_proto_library() rule. Bootstrapping rules
|
|
|
|
|
will always be hidden, and will not honor the visibility parameter passed here.
|
|
|
|
|
deps: other bootstrap_upb_proto_library() rules that this one depends on.
|
|
|
|
|
**kwargs: Other arguments that will be passed through to cc_library(), genrule(), and
|
|
|
|
|
upb_proto_library().
|
|
|
|
|
"""
|
|
|
|
|
_stage0_proto_staleness_test(name, base_dir, oss_src_files, oss_src_rules, oss_strip_prefix)
|
|
|
|
|
|
|
|
|
|
# stage0 uses checked-in protos, and has no MiniTable.
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
native.cc_library(
|
|
|
|
|
name = name + "_stage0",
|
|
|
|
|
srcs = _generated_srcs_for_suffix(base_dir + "stage0", oss_src_files, ".upb.c"),
|
|
|
|
|
hdrs = _generated_srcs_for_suffix(base_dir + "stage0", oss_src_files, ".upb.h"),
|
|
|
|
|
includes = [base_dir + "stage0"],
|
|
|
|
|
visibility = ["//upb_generator:__pkg__"],
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
# This macro signals to the runtime that it must use OSS APIs for descriptor.proto/plugin.proto.
|
|
|
|
|
defines = ["UPB_BOOTSTRAP_STAGE0"],
|
|
|
|
|
deps = [
|
|
|
|
|
"//upb:generated_code_support__only_for_generated_code_do_not_use__i_give_permission_to_break_me",
|
|
|
|
|
"//upb:mini_table",
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
] + [dep + "_stage0" for dep in deps],
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
src_files = google3_src_files if _is_google3 else oss_src_files
|
|
|
|
|
src_rules = google3_src_rules if _is_google3 else oss_src_rules
|
|
|
|
|
|
|
|
|
|
# Generate stage1 protos (C API and MiniTables) using stage0 compiler.
|
|
|
|
|
_generate_stage1_proto(name, base_dir, src_files, src_rules, "upb", kwargs)
|
|
|
|
|
_generate_stage1_proto(name, base_dir, src_files, src_rules, "upb_minitable", kwargs)
|
|
|
|
|
|
|
|
|
|
native.cc_library(
|
|
|
|
|
name = name + "_minitable_stage1",
|
|
|
|
|
srcs = _generated_srcs_for_suffix(base_dir + "stage1", src_files, ".upb_minitable.c"),
|
|
|
|
|
hdrs = _generated_srcs_for_suffix(base_dir + "stage1", src_files, ".upb_minitable.h"),
|
|
|
|
|
includes = [base_dir + "stage1"],
|
|
|
|
|
visibility = ["//upb_generator:__pkg__"],
|
|
|
|
|
deps = [
|
|
|
|
|
"//upb:generated_code_support__only_for_generated_code_do_not_use__i_give_permission_to_break_me",
|
|
|
|
|
] + [dep + "_stage1" for dep in deps],
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
native.cc_library(
|
|
|
|
|
name = name + "_stage1",
|
|
|
|
|
hdrs = _generated_srcs_for_suffix(base_dir + "stage1", src_files, ".upb.h"),
|
|
|
|
|
includes = [base_dir + "stage1"],
|
|
|
|
|
visibility = ["//upb_generator:__pkg__"],
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
deps = [
|
|
|
|
|
"//upb:generated_code_support__only_for_generated_code_do_not_use__i_give_permission_to_break_me",
|
|
|
|
|
":" + name + "_minitable_stage1",
|
upb is self-hosting!
This CL changes the upb compiler to no longer depend on C++ protobuf libraries. upb now uses its own reflection libraries to implement its code generator.
# Key Benefits
1. upb can now use its own reflection libraries throughout the compiler. This makes upb more consistent and principled, and gives us more chances to dogfood our own C++ reflection API. This highlighted several parts of the C++ reflection API that were incomplete.
2. This CL removes code duplication that previously existed in the compiler. The upb reflection library has code to build MiniDescriptors and MiniTables out of descriptors, but prior to this CL the upb compiler could not use it. The upb compiler had a separate copy of this logic, and the compiler's copy of this logic was especially tricky and hard to maintain. This CL removes the separate copy of that logic.
3. This CL (mostly) removes upb's dependency on the C++ protobuf library. We still depend on `protoc` (the binary), but the runtime and compiler no longer link against C++'s libraries. This opens up the possibility of speeding up some builds significantly if we can use a prebuilt `protoc` binary.
# Bootstrap Stages
To bootstrap, we check in a copy of our generated code for `descriptor.proto` and `plugin.proto`. This allows the compiler to depend on the generated code for these two protos without creating a circular dependency. This code is checked in to the `stage0` directory.
The bootstrapping process is divided into a few stages. All `cc_library()`, `upb_proto_library()`, and `cc_binary()` targets that would otherwise be circular participate in this staging process. That currently includes:
* `//third_party/upb:descriptor_upb_proto`
* `//third_party/upb:plugin_upb_proto`
* `//third_party/upb:reflection`
* `//third_party/upb:reflection_internal`
* `//third_party/upbc:common`
* `//third_party/upbc:file_layout`
* `//third_party/upbc:plugin`
* `//third_party/upbc:protoc-gen-upb`
For each of these targets, we produce a rule for each stage (the logic for this is nicely encapsulated in Blaze/Bazel macros like `bootstrap_cc_library()` and `bootstrap_upb_proto_library()`, so the `BUILD` file remains readable). For example:
* `//third_party/upb:descriptor_upb_proto_stage0`
* `//third_party/upb:descriptor_upb_proto_stage1`
* `//third_party/upb:descriptor_upb_proto`
The stages are:
1. `stage0`: This uses the checked-in version of the generated code. The stage0 compiler is correct and outputs the same code as all other compilers, but it is unnecessarily slow because its protos were compiled in bootstrap mode. The stage0 compiler is used to generate protos for stage1.
2. `stage1`: The stage1 compiler is correct and fast, and therefore we use it in almost all cases (eg. `upb_proto_library()`). However its own protos were not generated using `upb_proto_library()`, so its `cc_library()` targets cannot be safely mixed with `upb_proto_library()`, as this would lead to duplicate symbols.
3. final (no stage): The final compiler is identical to the `stage1` compiler. The only difference is that its protos were built with `upb_proto_library()`. This doesn't matter very much for the compiler binary, but for the `cc_library()` targets like `//third_party/upb:reflection`, only the final targets can be safely linked in by other applications.
# "Bootstrap Mode" Protos
The checked-in generated code is generated in a special "bootstrap" mode that is a bit different than normal generated code. Bootstrap mode avoids depending on the internal representation of MiniTables or the messages, at the cost of slower runtime performance.
Bootstrap mode only interacts with MiniTables and messages using public APIs such as `upb_MiniTable_Build()`, `upb_Message_GetInt32()`, etc. This is very important as it allows us to change the internal representation without needing to regenerate our bootstrap protos. This will make it far easier to write CLs that change the internal representation, because it avoids the awkward dance of trying to regenerate the bootstrap protos when the compiler itself is broken due to bootstrap protos being out of date.
The bootstrap generated code does have two downsides:
1. The accessors are less efficient, because they look up MiniTable fields by number instead of hard-coding the MiniTableField into the generated code.
2. It requires runtime initialization of the MiniTables, which costs CPU cycles at startup, and also allocates memory which is never freed. Per google3 rules this is not really a leak, since this memory is still reachable via static variables, but it is undesirable in many contexts. We could fix this part by introducing the equivalent of `google::protobuf::ShutdownProtobufLibrary()`).
These downsides are fine for the bootstrapping process, but they are reason enough not to enable bootstrap mode in general for all protos.
# Bootstrapping Always Uses OSS Protos
To enable smooth syncing between Google3 and OSS, we always use an OSS version of the checked in generated code for `stage0`, even in google3.
This requires that the google3 code can be switched to reference the OSS proto names using a preprocessor define. We introduce the `UPB_DESC(xyz)` macro for this, which will expand into either `proto2_xyz` or `google_protobuf_xyz`. Any libraries used in `stage0` must use `UPB_DESC(xyz)` rather than refer to the symbol names directly.
PiperOrigin-RevId: 501458451
2 years ago
|
|
|
] + [dep + "_stage1" for dep in deps],
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
# The final protos are generated via normal upb_proto_library().
|
|
|
|
|
upb_proto_library(
|
|
|
|
|
name = name,
|
|
|
|
|
deps = proto_lib_deps,
|
|
|
|
|
visibility = visibility,
|
|
|
|
|
**kwargs
|
|
|
|
|
)
|
