videoio/FFmpeg: increased packet read attempt limit, allow configuring it
resolves#9455
related #3225
* Use different counters for wrong packets recieved by demuxer and errors from decoder
* Allow modifying these counters via environment variables `OPENCV_FFMPEG_READ_ATTEMPTS`/`OPENCV_FFMPEG_DECODE_ATTEMPTS`
* Added logging when reading breaks at one of error limits
Notes:
* I've been able to reproduce original issue with a video file with 14 total streams (video + audio + subtitles), at some point in the video only packets from the last stream are being sent by the demuxer, thus exceeding our limit. For my specific video total number of packets from wrong stream was about 2700. I've chosen 4096 as default value.
* Default limit of decoding attempts is quite low, because I'm not sure in which cases it can be exceeded (network stream?). I tried to read 8k video from the disk, but it did not cause break at decode point.
Build DNN without Protobuf
DNN module can be built without Protobuf for Darknet, TFLite, OpenVINO, Torch (not PyTorch) models.
```
cmake \
-DCMAKE_BUILD_TYPE=Release \
-DBUILD_LIST=dnn \
-DWITH_PROTOBUF=OFF \
-DWITH_OPENCL=OFF
7.1M lib/libopencv_dnn.so.4.7.0
```
```
cmake \
-DCMAKE_BUILD_TYPE=Release \
-DBUILD_LIST=dnn \
-DWITH_OPENCL=OFF
3.9M lib/libopencv_dnn.so.4.7.0
```
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Improve document of cv::RotatedRect for #23335#23342fix#23335
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
don't ignore documentation for cv::format in doxygen #23555
Issue https://github.com/opencv/opencv/issues/23553
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work issue
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
AGP 8.0 build.gradle namespace and aidl buildFeature requirement added #23447
Hello,
Android Gradle Plugin version 8.0 is asking for namespace. This is become mandatory and after I update my AGP to 8.0, I got this error
```
Namespace not specified. Please specify a namespace in the module's build.gradle file like so:
android {
namespace 'com.example.namespace'
}
If the package attribute is specified in the source AndroidManifest.xml, it can be migrated automatically to the namespace value in the build.gradle file using the AGP Upgrade Assistant; please refer to https://developer.android.com/studio/build/agp-upgrade-assistant for more information.
```
This change fix this future releases. However I am not sure how opencv wants to user namespace I used "org.opencv" if there is a different namespace please let me know so I can changed that too. Also should I add namepsace into "opencv/modules/java/android_sdk/android_gradle_lib/build.gradle" here ?
### Sources
Android developer link: https://developer.android.com/studio/preview/features#namespace-dsl
Issue Tracker Google: https://issuetracker.google.com/issues/191813691?pli=1#comment19
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Import and inference INT8 quantized TFLite model #23409
### Pull Request Readiness Checklist
* Support quantized TFLite models
* Enable fused activations (FP32, INT8)
**Merge with extra**: https://github.com/opencv/opencv_extra/pull/1048
on the image, green boxes are from TFLite and red boxes from OpenCV
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Fix ONNX parser for single-layer LSTM hidden and cell states #23475
### Fix ONNX parser for single-layer LSTM hidden and cell states
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
This PR addresses #21118 [issue](https://github.com/opencv/opencv/issues/21118). The problem is that the ONNX parser is unable to read the hidden state and cell state for single-layer LSTMs. This PR fixes the issue by updating the parser to correctly read hidden and cell states.
DNN: Add New API blobFromImageParam #22750
The purpose of this PR:
1. Add new API `blobFromImageParam` to extend `blobFromImage` API. It can support the different data layout (NCHW or NHWC), and letter_box.
2. ~~`blobFromImage` can output `CV_16F`~~
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
dnn: Support more operators in CANN backend #23401
This PR adds the support of following layers:
- [x] Sub
- [x] PRelu
- [x] DeConv
- [x] Also warn users if backend is switched back to default if some of the layers are not supported.
- [ ] [Dropped] LSTM: some hacks (adding layers) were introduced which makes it even harder to build the graph for CANN backend.
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Added LSTM and GRU tests for various batch and input length sizes #23501
Added tests with various sequence length and batch sizes
Test data: https://github.com/opencv/opencv_extra/pull/1057
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
* Replaced most remaining sprintf with snprintf
* Deprecated encodeFormat and introduced new method that takes the buffer length
* Also increased buffer size at call sites to be a little bigger, in case int is 64 bit
Added explicit cast to unsigned before doing the left shift.
This was caught by UBSan which reported things like:
drawing.cpp:361:22: runtime error: left shift of negative value -26214
drawing.cpp:383:22: runtime error: left shift of negative value -78642
Fix python bindings for setCharucoParameters #23436
setCharucoParameters fails in python
Fixes: https://github.com/opencv/opencv/issues/23440
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Add scrollWheel to Cocoa #23394
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [ ] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Add notes for the output format of FaceDetectorYN.detect()
Resolves https://github.com/opencv/opencv/pull/23020#issuecomment-1499010015
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
imgcodecs: tiff: Support to encode for CV_32S with compression params
Fix https://github.com/opencv/opencv/issues/23416
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Fix identifying initializers in ONNX graph simplification #23296
Fixes https://github.com/opencv/opencv/issues/23295
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
**Merge with extra**: https://github.com/opencv/opencv_extra/pull/1050
For 32 bits per pixel with 3 or 4 channel destination images, apply scale factor and mask to parse BMP files correctly
closes#23445
### Pull Request Readiness Checklist
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Maksim Shabunin
Matthias Möller
Dmitry Kurtaev
wanli
Giles Payne
vovka643
zihaomu
kallaballa
Stefan Becker
n0099
Sean McBride
Pierre Chatelier
Laurent Berger
Onuralp Sezer
Alex
Abduragim Shtanchaev
cudawarped
Abduragim Shtanchaev
Dmitry Matveev
Yuantao Feng
Milan van Wouden
keith siilats
smeng9
Gaotianhong
thewoz
TolyaTalamanov
Kumataro
gottagofaster236
Alexander Smorkalov
eplankin
tantei3
