T.Sequence is a questionable concept. The idea is to hammer out generic,
maximally forgiving APIs that operate on protocols, which is a fancy way
of saying "I don't care if you use tuples or lists". This is rarely
needed, actually, and in exchange for this fancy behavior you get free
bugs.
Specifically, `somestr` is of type `T.Sequence[str]`, and also
`somestr[0]` is another string of type you guessed it. It's ~~turtles~~
strings all the way down.
It's worth noting that trying to code for "protocols" is a broken
concept if the contents have semantic meaning, e.g. it operates on
"the install tags of this object" rather than "an iterable that supports
efficient element access".
The other way to use T.Sequence is "I don't like that T.List is
invariant, but also I don't like that T.Tuple makes you specify exact
ordering". This sort of works. In fact it probably does work as long as
you don't allow str in your sequences, which of course everyone allows
anyway.
Use of Sequence has cute side effects, such as actually passing lists
around, knowing that you are going to get a list and knowing that you
need to pass it on as a list, and then having to re-allocate as
`list(mylist)` "because the type annotations says it could be a str or
tuple".
Except it cannot be a str, because if it is then the application is
fatally flawed and logic errors occur to disastrous end user effects,
and the type annotations:
- do not enforce their promises of annotating types
- fail to live up to "minimal runtime penalties" due to all the `list()`
Shun this broken concept, by hardening the type annotations. As it turns
out, we do not actually need any of this covariance or protocol-ism for
a list of strings! The whole attempt was a slow, buggy waste of time.
There are two problems here: a typing problem, and an algorithm problem.
We expect it to always be passed to CustomTarget() as a list, but we ran
list() on it, which became horribly mangled if you violated the types
and passed a string instead. This caused weird*er* errors and didn't
even do anything. We want to do all validation in the interpreter,
anyway, and make the build level dumb.
Meanwhile we type it as accepting a T.Sequence, which technically
permits... a string, actually. This isn't intentional; the point of
using T.Sequence is out of a misguided idea that APIs are supposed to be
"technically correct" by allowing "anything that fulfills an interface",
which is a flawed concept because we aren't using interfaces here, and
also because "technically string fulfills the same interface as a list,
if we're talking sequences".
Basically:
- mypy is broken by design, because it typechecks "python", not "what we
wish python to be"
- we do not actually need to graciously permit passing tuples instead of
lists
As far as historic implementations of this logic go, we have formerly:
- originally, typeslistified anything
- switched to accepting list from the interpreter, redundantly ran list()
on the list we got, and mishandling API violations passing a string
(commit 11f9638035)
- switched to accepting anything, stringlistifying it if it was not
`None`, mishandling `[None]`, and invoking list(x) on a brand new list
from stringlistify (commit 157d438835)
- stopped stringlistify, just accept T.List[str | None] and re-cast to
list, violates typing because we use/handle plain None too
(commit a8521fef70)
- break typing by declaring we accept a simple string, which still
results in mishandling by converting 'foo' -> ['f', 'o', 'o']
(commit ac576530c4)
All of this. ALL of it. Is because we tried to be fancy and say we
accept T.Tuple; the only version of this logic that has ever worked
correctly is the original untyped do-all-validation-in-the-build-phase
typeslistified version.
Let's just call it what it is. We want a list | None, and we handle it too.
In particular, CUDA 12 removes support for Kepler (3.x) entirely.
Unusually, however, it does not introduce any new architectures,
or even compute capabilities.
When finding a py.dependency() we try to use pkg-config. We then apply
our own custom base class, which replaces self.name with the informative
comment "override the name from the "real" dependency lookup", to which
I can only say "uhhh why". Why do we want to do that???
It turns out we don't, it was just a really old legacy design because we
had a SystemDependency with a .pkgdep attribute hiding the real
dependency bizarro-land style. We cleaned that up in commit
4d67dd19e5 and as part of that, we
*shifted over* the self.name assignment to preserve the visible effects,
sort of. We didn't have a *reason* to override the name, we just did it
because... we weren't sure whether it mattered.
Unfortunately it very much does matter the other way -- we don't want
it. We can pass this dependency to the pkgconfig module, which uses the
name attribute to fill out the `Requires: ` field. Also, the name should
name what we have. :p
Get rid of this bizarre historic quirk. Since we have proper
dependencies here, we should go all in.
Fixes https://github.com/ufo-kit/ufo-core/pull/185#issuecomment-1328224996
It is only used by Environment.get_exe_wrapper() and every callers were
handling None already. Type annotation was wrong, it already could
return None for the case an exe wrapper is needed but none is provided.
Since it's also used in the rust module, it should be in a common place.
Also rename from `TEST_KWARGS` to `TEST_KWS`, which is more in line with
the `*_KW` naming scheme used in the type_checking module.
Which adds the `use-set-for-membership` check. It's generally faster in
python to use a set with the `in` keyword, because it's a hash check
instead of a linear walk, this is especially true with strings, where
it's actually O(n^2), one loop over the container, and an inner loop of
the strings (as string comparison works by checking that `a[n] == b[n]`,
in a loop).
Also, I'm tired of complaining about this in reviews, let the tools do
it for me :)
This finds uses of deny-listed functions, which defaults to map and
filter. These functions should be replaced by comprehensions in
idiomatic python because:
1. comprehensions are more heavily optimized and are often faster
2. They avoid the need for lambdas in some cases, which make them
faster
3. you can do the equivalent in one statement rather than two, which
is faster
4. They're easier to read
5. if you need a concrete instance (ie, a list) then you don't have
to convert the iterator to a list afterwards
The `py.dependency(embed: false)` method is supposed to consistently
provide a distutils-like `python.pc` / `python-embed.pc` interface
regardless of Python version. It handles both pkg-config and sysconfig
scraping. For the latter, we respect the value of self.link_libpython
as determined by distutils, and construct a fully custom dependency. For
the former, we blindly assume pkg-config is correct.
It isn't correct, not until Python 3.8 when embed was added. Before
then, we need to process the pkg-config dependency based on
link_libpython. We did this, but only inside the extension_module
method, which is obviously wrong.
Delete the special casing from extension_module, and handle it inside
the dependency.
Fixes#11097
On Windows, in Python version prior to 3.8.7, the `sysconfig` modules
provides an extension filename suffix that disagrees the one returned
by `distutils.sysconfig`. Get the more awesome suffix from the latter
when building for a Python version known to present this issue.
Simplify the extension module filename suffix lookup to use the same
method used by `setuptools`.
Adjust project tests accordingly.
Fixes#10960.
Since commit 32b14b1bb5, hotdoc is run
during configure as an external program. It turns out though, that in
some cases we passed NoneType in the cmd array, previously to
hotdoc.run_hotdoc.run() and now via subprocesses. The former "worked"
due to ignoring unknown arguments (?) but the latter was broken because
command line interfaces don't accept python NoneType objects, naturally.
End result: when for example building Meson's own documentation, this
fails with a python traceback.
The reason this happens to begin with turns out to be, once again,
because of the legacy debt of homebrewed kwargs parsing. We have a
function for `process_known_args` that handles args and ignores them if
they are NoneType, and then include_paths is handled via a custom
processor that internally adds them, then returns a *list* of NoneType
which then gets appended to the global cmd, because the logic ends up as
`[None, None] is None` which is a failed check, so we go ahead and add
it.
It's odd that we ever attempted to process it twice to begin with, so
let's simply not do that.
We are just using this dictionary to get keys, and we could also just
set it ourselves but with None values. But we have a code abstraction
for this already; use it.
We need to run it as an external command at build time anyway, and we
detect it by looking it up as an ExternalProgram. It seems odd to then
import it into Meson's python interpreter and run the main function.
Moreover, this errors out when you are running two different pythons,
one for Meson and one for hotdoc. For example, when hotdoc is installed
normally, but you're testing Meson against a nondefault newer version of
python.
We consistently use the "dependencies" kwarg to refer to C-like
CFLAGS/LDFLAGS interfaces. And for hotdoc, we actually accept libraries
for this as well, as we may want to document their (generated?) sources,
so we want their CFLAGS too.
But we also accepted custom targets and just added a build order
dependency on these, which was odd and typically we call that "depends".
Let's deprecate this in favor of the depends kwarg.
Internally we pass this as extra_depends to the CustomTarget
initializer, so it makes sense to call it that rather than confusing the
topic by referring to "dependencies", a term that indicates
CFLAGS/LDFLAGS interfaces.
GeneratedLists as sources to `gnome.gdbus_codegen` worked until
version 0.60 of Meson, but broke in 0.61 because of the conversion to
typed_pos_args and typed_kwargs. Reinstate this by adding them to the
decorators and annotations.
Note that gdbus_codegen desugars to two custom_targets and therefore the
generator is invoked twice. This is not optimal, but it should not be
an issue and can be changed later.
Fixes: 53a187ba2 ("modules/gnome: use typed_pos_args for gdbus_codegen", 2021-11-01)
Fixes: ef52e6093 ("modules/gnome: use typed_kwargs for gdbus_codegen", 2021-11-08)
Custom targets as sources to `gnome.gdbus_codegen` worked until version 0.60
of Meson, but broke in 0.61 because of the conversion to typed_pos_args
and typed_kwargs. Reinstate this by adding custom targets to the
decorators and annotations.
While generators also used to work, they are a bit tricky because
gdbus_codegen desugars to two custom_targets and therefore the generator
is invoked twice. This should not be a problem, but be explicit and
leave that to a separate commit to highlight the problem.
Fixes: 53a187ba2 ("modules/gnome: use typed_pos_args for gdbus_codegen", 2021-11-01)
Fixes: ef52e6093 ("modules/gnome: use typed_kwargs for gdbus_codegen", 2021-11-08)
We accept a list of known kwargs of required types, but also arbitrary
kwargs understood by the hotdoc program (sometimes via extensions). Now
that we can partially type-check kwargs, do so here.
This catches some optimization problems, mostly in the use of `all()`
and `any()`. Basically writing `any([x == 5 for x in f])` vs `any(x == 5
for x in f)` reduces the performance because the entire concrete list
must first be created, then iterated over, while in the second f is
iterated and checked element by element.
itstool detects a language code from the mo file’s basename,
so when 26c1869a14
changed the file name to be prefixed with project name,
values like “my-project-xx” ended up in the `xml:lang` attribute
of the generated page files, instead of the expected
IETF BCP 47 language tag.
Let’s fix it by passing a locale code to itstool explicitly.
This removes the need for the use of the global statement. I've also
updated the test that overrides this to use mock.patch instead of hand
monkey patching.
It turns out we don't generally need to proxy every compiler ever
through the top-level package. The number of times we directly poke at
one is negligible and direct imports are pretty clean.
Gettext should search for input files relative to the (sub)project
source root, not the global source root.
This change exposes a root_subdir member in ModuleState.
wayland-scanner can generate header files that only include
wayland-client-core.h using a flag.
Add a core_only option to scan_xml to support this use case.
Eli Schwartz
Tristan Partin
Olexa Bilaniuk
Xavier Claessens
Dylan Baker
Daniele Nicolodi
Hagen Möbius
Paolo Bonzini
Nirbheek Chauhan
Paolo Borelli
Jan Tojnar
David Ward
Mark Bolhuis
Thomas Li