In commit a7e458effa we stopped erroring
out on invalid TAP stream contents, with the rationale that "prove" has
become more lenient.
A close reading of the TAP spec indicates why, though:
> A TAP parser is required to not consider an unknown line as an error but
> may optionally choose to capture said line and hand it to the test
> harness, which may have custom behavior attached. This is to allow for
> forward compatability. Test::Harness silently ignores incorrect lines,
> but will become more stringent in the future. TAP::Harness reports TAP
> syntax errors at the end of a test run.
The goal of treating unknown lines as an error in the TAP parser is not
because unknown lines are fine and dandy. The goal is to allow
implementing future versions of TAP, and handling it via existing
parsers. Since Meson has both a parser and a harness, let's do exactly
that -- pass these lines as a distinctive status to the test harness,
then have the test harness complain.
The pkg-config dependency class has some interesting logic for finding a
good pkg-config that will be used for dependency lookups. We sometimes
need to use it, though, outside of the class. Make that possible.
Adds a new maximum warning level that is roughly equivalent to "all warnings".
This adds a way to use `/Wall` with MSVC (without the previous broken warning),
`-Weverything` with clang, and almost all general warnings in GCC with
strictness roughly equivalent to clang's `-Weverything`.
The GCC case must be implemented by meson since GCC doesn't provide a similar
option. To avoid maintenance headaches for meson, this warning level is
defined objectively: all warnings are included except those that require
specific values or are specific to particular language revisions. This warning
level is mainly intended for new code, and it is expected (nearly guaranteed)
that projects will need to add some suppressions to build cleanly with it.
More commonly, it's just a handy way to occasionally take a look at what
warnings are present with some compiler, in case anything interesting shows up
you might want to enable in general.
Since the warnings enabled at this level are inherently unstable with respect
to compiler versions, it is intended for use by developers and not to be set as
the default.
Factors out opening the meson log into its own function so that
it can be used in the places where with was done before.
Additionally instead of checking if the file exists before opening it,
try to open it and handle the exception when it is not found.
We use a dummy project with a vague name and try to find flags for it
based on the installable pkg-config files. This sort of works,
generally, because it attempts to match `-lct` which doesn't exist
because the test case isn't installed, and that link argument is passed
directly through.
Except, sometimes that library does exist. It is provided by the
"freetds" project, which may be a dependency other tools. In that case,
Meson finds a library, and the `dependency()` resolves to
`/usr/lib/libct.so` and the test fails.
Fortunately, we do have an API to say that we really want to get back
the same flags pkg-config returned. Use this.
It was only trying to guess install tag, and log missing tags, for files
installed by install_data(). Do it also for all other files, especially
custom_taget() that commonly installs generated headers.
Those classes are used by wrapper scripts and we should not have to
import the rest of mesonlib, build.py, and all their dependencies for
that.
This renames mesonlib/ directory to utils/ and add a mesonlib.py module
that imports everything from utils/ to not have to change `import
mesonlib` everywhere. It allows to import utils.core without importing
the rest of mesonlib.
This removes the need for the use of the global statement. I've also
updated the test that overrides this to use mock.patch instead of hand
monkey patching.
This is wasteful and generally unneeded, since code can just use the
compiler they detected instead of manually poking at the internals of
this subpackage.
It also avoids importing an absolute ton of code the instant one runs
`from . import compilers`
In various situations we want to figure out what type of compiler we
have, because we want to know stuff like "is it the pgi one", or "does
it use msvc style". The compiler object has this property already, via
an API specifically designed to communicate this info, but instead we
performed isinstance checks on a compiler class.
This is confusing and indirect, and has the side effect of requiring
more imports everywhere. We should do away with it.
Save off the hash of the wrap file when first configuring a subproject.
When reconfiguring a subproject, check the hash of the wrap file
against the stored hash. If they don't match then warn the user.
When the build definition has changed since the last ninja invocation meson
test operated on an outdated list of tests and their dependencies. That could
lead to some tests not being run / not all dependencies being built. This was
particularly confusing because the user would see the output of
reconfiguration and rebuilding, and the next mtest invocation would have the
updated configuration.
One issue with this is that that we will now output more useless ninja output
when nothing needs to be done (the "Entering directory" part is not repeated,
as we happen to be in the build directory already). It likely is worth
removing that output, perhaps by testing if anything needs to be done with
ninja -n, but that seems better addressed separately.
Fixes: #9852
This is generally a bad idea, e.g. it causes OSError on freebsd.
It also gets ignored by solaris and thus causes unittest failures.
The proper solution is to simply reject any attempt to set this, and log a
warning.
The install_emptydir function does apply the mode as well, and since it
is a directory it actually does something. This is the only place where
we don't reset the mode.
Although install_subdir also installs directories, and in theory it
could set the mode as well, that would be a new feature. Also it doesn't
provide much granularity and has mixed semantics with files. Better to
let people use install_emptydir + install_subdir.
Fixes#5902
Generally plumb through the values of get_option() passed to
install_dir, and use this to establish the install plan name. Fixes
several odd cases, such as:
- {datadir} being prepended to "share" or "include"
- dissociating custom install directories and writing them out as
{prefix}/share/foo or {prefix}/lib/python3.10/site-packages
This is the second half of #9478Fixes#10601
The first test is checking the added support for keys as either `dict`
or `list`.
The second checks that a default value which would otherwise trigger a
value_since check doesn't, and that passing the default value explicitly
does.
Thanks to `ModuleInfo`, all modules are just named `foo.py` instead of
`unstable_foo.py`, which simplifies the import method a bit. This also
allows for accurate FeatureNew/FeatureDeprecated use, as we know when
the module was added and if/when it was stabilized.
This is ambiguous, if the build directory has the same name as a
subcommand then we end up running the subcommand. It also means we have
a hard time adding *new* subcommands, because if it is a popular name of
a build directory then suddenly scripts that try to set up a build
directory end up running a subcommand instead.
The fact that we support this at all is a legacy design. Back in the
day, the "meson" program was for setting up a build directory and all
other tools were their own entry points, e.g. `mesontest` or
`mesonconf`. Then in commit fa278f351f we
migrated to the subcommand mechanism. So, for backwards compatibility,
we made those tools print a warning and then invoke `meson <tool>`. We
also made the `meson` tool default to setup.
However, we only warned for the other tools whose entry points were
eventually deleted. We never warned for setup itself, we just continued
to silently default to setup if no tool was provided.
`meson setup` has worked since 0.42, which is 5 years old this week.
It's available essentially everywhere. No one needs to use the old
backwards-compatible invocation method, but it continues to drag down
our ability to innovate. Let's finally do what we should have done a
long time ago, and sunset it.
Currently, if we run "meson configure -Doption=value", meson will
do a reconfigure when running "ninja build" afterwards, even if
the new value is the same one that was already configured previously.
To avoid this unnecessary reconfigure, let's use replace_if_different()
instead of unconditionally replacing the conf file in coredata's save()
function.
When a subproject is disabled on the initial configuration we should not
add it into self.coredata.initialized_subprojects because that will
prevent calling self.coredata.init_builtins() on a reconfigure if the
subproject gets enabled.
Fixes: #10225.
We only want to scan stdout for these strings, and particularly, if we
allow `-d explain` to be mingled into stdout, then buffering issues
across OSes can lead to inaccurate results.
There are a couple issues that combine to make the current handling a
bit confusing.
- we call it "install_dir_name" but it is only ever the class default
- CustomTarget always has it set to None, and then we check if it is
None then create a different variable with a safe fallback. The if is
useless -- it cannot fail, but if it did we'd get an undefined
variable error when we tried to use `dir_name`
Remove the special handling for CustomTarget. Instead, just always
accept None as a possible value of outdir_name when constructing install
data, and, if it is None, fall back to {prefix}/outdir regardless of
what type it used to be.
Fix "Tried to grab file outside current (sub)project" error when subproject exists within
a source tree but it is used through a symlink. Using subprojects as symlinks is very useful
feature when migrating an existing codebase to meson that all sources do not need to be
immediately moved to subprojects folder.
TAP version 14 introduced subtests, that are supposedly backward compatible
because "TAP13 specifies that non-TAP output should be ignored". Meson
reported TAP syntax errors based on behavior of "prove" at the time,
but it seems that now "prove" has become a lot more lenient; it even
accepts the following completely bogus input just fine:
---
ok 1
ok 2
x
1..1
---
So do the same and make Meson's parser accept invalid TAP input silently.
Fixes: #10032
"targetting" is verb-derived adjective, which sort-of-works here, but
makes the whole sentence awkward, because there's no verb. Let's just
use present simple.
Older versions are not supported by the cmake module since 0.62.
This avoids having to hard-code the linux-bionic-gcc CI job as being
unable to run these tests, which leaves other older environments like
Debian 10 still trying to run them (and failing).
Signed-off-by: Simon McVittie <smcv@collabora.com>
This was already skipped when running on the Ubuntu 18.04 version of gcc,
but it also fails with gcc 8.3.0 on Debian 10. Instead of hard-coding
specific versions to look for, do a version comparison.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The new get_env() method that returns an EnvironmentVariables object
will be needed in next commit that will pass it to CustomTarget.
This has the side effect to use the proper os specific path separator
instead of hardcoding `:`. It is the obvious right thing to do here, but
has caused issues in the past. Hopefully issues have been fixed in the
meantime. If not, better deal with fallouts than keep doing the wrong
thing forever.
[why]
Support for the relatively new mold linker is missing. If someone wants
to use mold as linker `LDFLAGS="-B/path/to/mold"` has to be added instead
of the usual `CC_LD=mold meson ...` or `CXX_LD=mold meson ...`.
[how]
Allow `mold' as linker for clang and newer GCC versions (that versions
that have support).
The error message can be a bit off, because it is generic for all GNU
like compilers, but I guess that is ok. (i.e. 'mold' is not listed as
possible linker, even if it would be possible for the given compiler.)
[note]
GCC Version 12.0.1 is not sufficient to say `mold` is supported. The
expected release with support will be 12.1.0.
On the other hand people that use the un-released 12.0.1 will probably
have built it from trunk. Allowing 12.0.1 is helping bleeding edge
developers to use mold in Meson already now.
Fixes: #9072
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
- Documentation for the pkgconfig.relocatable module option in
Builtin-options. Gives an explanation on what it does, usefulness and
what error that can occur when using it.
- Add pkgconfig.relocatable release snippet. Similar to the
documentation in Builtin-options. Just a bit more brief.
- Add Pkgconfig to DataTests.test_builtin_options_documented in the
docs unit tests.
Qt now has official guidance for the symlinked names of the tools, which
is great.
Qt now officially calls the tools `fooX` instead of `foo-qtX` where the
major version of Qt is X. Which is not great, because a bit of an
unofficial standard had prior art and now needs to change, and we never
adapted.
Prefer the official name whenever looking up qmake, and in the
testsuite, specifically look only for the official name on versions of
qt which we know should have that.
Eli Schwartz
David Robillard
Marvin Scholz
Jussi Pakkanen
Xeonacid
Xavier Claessens
L. E. Segovia
Elliott Sales de Andrade
Dylan Baker
Daniel Carson
Yang Bo
Thomas Li
Andres Freund
Hemmo Nieminen
Daan De Meyer
Justin Blanchard
Vili Väinölä
Paolo Bonzini
Zbigniew Jędrzejewski-Szmek
Simon McVittie
Fini Jastrow
Fredrik Salomonsson