gtk-doc for autotools has the concept of module version, that is used to define
the module install path and the devhelp2 basename.
Add a `module_version` parameter to gnome.gtkdoc to replicate the same behavior.
Updated the test checking that the install_dir is properly computed (if not
passed), and that the .devhelp2 file has proper name.
https://gitlab.gnome.org/GNOME/gtk-doc/blob/GTK_DOC_1_29/buildsystems/autotools/gtk-doc.make#L269
The code was adding the library paths to LD_LIBRARY_PATH, but that
doesn't work on Windows where they need to be added to PATH instead.
Move the environ handling into gtkdoc_run_check() and add paths to PATH
instead of LD_LIBRARY_PATH when on Windows.
This fixes the gtk-doc build for glib on Windows
(in case glib isn't installed already)
gtkdoc-scangobj has a --run argument that specifies a wrapper to be used when
executing the GObject scanner. Typically this can be libtool but it is also
useful in cross-compilation environments.
This patch adds support for this argument to the gtkdochelper so that tools
using the helper can pass --run if required.
We used to immediately try to use whatever exe_wrapper was defined in
the cross file, but some people generate the cross file once and use
it for several projects, most of which do not even need an exe wrapper
to build.
Now we're a bit more resilient. We quietly fall back to using
non-exe-wrapper paths for compiler checks and skip the sanity check.
However, if some code needs the exe wrapper, f.ex., if you run a built
executable using custom_target() or run_target(), we will error out
during setup.
Tests will, of course, continue to error out when you run them if the
exe wrapper was not found. We don't want people's tests to silently
"pass" (aka skip) because of a bad CI setup.
Closes https://github.com/mesonbuild/meson/issues/3562
This commit also adds a test for the behaviour of exe_wrapper in these
cases, and refactors the unit tests a bit for it.
We already have code to fetch and find binaries specified in a cross
file, so use the same code for exe_wrapper. This allows us to handle
the same corner-cases that were fixed for other cross binaries.
This was added accidentally. Includes a test for it.
Also fix a rebase error. The variable was defined incorrectly and was
overwritten with the correct value immediately afterwards.
On macOS, we set the install_name for built libraries to
@rpath/libfoo.dylib, and when linking to the library, we set the RPATH
to its path in the build directory. This allows all built binaries to
be run as-is from the build directory (uninstalled).
However, on install, we have to strip all the RPATHs because they
point to the build directory, and we change the install_name of all
built libraries to the absolute path to the library. This causes the
install name in binaries to be out of date.
We now change that install name to point to the absolute path to each
built library after installation.
Fixes https://github.com/mesonbuild/meson/issues/3038
Fixes https://github.com/mesonbuild/meson/issues/3077
With this, the default workflow on macOS matches what everyone seems
to do, including Autotools and CMake. The next step is providing a way
for build files to override the install_name that is used after
installation for use with, f.ex., private libraries when combined with
the install_rpath: kwarg on targets.
The install name is used by consumers of the library to find the
library at runtime. If it's @rpath/libfoo.dylib, all consumers must
manually add the library path to RPATH, which is not what people
expect.
Almost everyone sets the library install name as the full path to the
library, and this is done at install time with install_name_tool.
Without this, building a module in a Flatpak app manifest that is a
newer version of a module already present in the Flatpak runtime will
fail. (The Flatpak file system is a bunch of hard links to readonly
files, which can be replaced but not written to.)
This instead creates a temporary file in the same directory as the
destination (to avoid cross-device renaming errors) and atomically
renames the temporary file to the destination, replacing it instead of
rewriting it as shutil.copyfile() would do.
When the exe runner is `wine` or `wine32` or `wine64`, etc.
This allows people to run tests with wine.
Note that you also have to set WINEPATH to point to your custom
prefix(es) if your tests use external dependencies.
Closes https://github.com/mesonbuild/meson/issues/3620
This makes it possible to customize permissions of all installable
targets, such as executable(), libraries, man pages, header files and
custom or generated targets.
This is useful, for instance, to install setuid/setgid binaries, which
was hard to accomplish without access to this attribute.
Instead of using fragile guessing to figure out how to invoke meson,
set the value when meson is run. Also rework how we pass of
meson_script_launcher to regenchecker.py -- it wasn't even being used
With this change, we only need to guess the meson path when running
the tests, and in that case:
1. If MESON_EXE is set in the env, we know how to run meson
for project tests.
2. MESON_EXE is not set, which means we run the configure in-process
for project tests and need to guess what meson to run, so either
- meson.py is found next to run_tests.py, or
- meson, meson.py, or meson.exe is in PATH
Otherwise, you can invoke meson in the following ways:
1. meson is installed, and mesonbuild is available in PYTHONPATH:
- meson, meson.py, meson.exe from PATH
- python3 -m mesonbuild.mesonmain
- python3 /path/to/meson.py
- meson is a shell wrapper to meson.real
2. meson is not installed, and is run from git:
- Absolute path to meson.py
- Relative path to meson.py
- Symlink to meson.py
All these are tested in test_meson_commands.py, except meson.exe since
that involves building the meson msi and installing it.
Currently, commandrunner breaks when we give options to python because
it assumes python commands are in the form "python script.py", rather
than "python -u script.py" or "python -u -m module script.py". Extend it
to be more resilient and correctly parse python options.
If we pass a source files() object, we will look for it in the build
directory, which is wrong. If we pass a build files() object (from
configure_file()), we will find it in the build directory, and then
try to copy it on top of itself in gtkdochelper.py getting a
SameFileError.
Add a test for it, and also properly iterate custom target outputs
when adding to content files.
This option controls the permissions of installed files (except for
those specified explicitly using install_mode option, e.g. in
install_data rules.)
An install-umask of 022 will install all binaries, directories and
executable files with mode rwxr-xr-x, while all data and non-executable
files will be installed with mode rw-r--r--.
Setting install-umask to the string 'preserve' will disable this
feature, keeping the permissions of installed files same as the files in
the build tree (or source tree for install_data and install_subdir.)
Note that, in this case, the umask used when building and that used when
checking out the source tree will leak into the install tree.
Keep the default as 'preserve', to show that no behavior is changed and
all tests keep passing unchanged.
Tested: ./run_tests.py
Restore subproject exclusion for the html coverage report that existed
in the ninja backend legacy target.
Also exclude subprojects for the gcovr generated reports.
ninja coverage -> generate all possible reports (text, xml, html)
depending on gcovr and/or lcov/genhtml availability.
ninja coverage-html -> generate only html report
ninja coverage-xml -> generate only xml report
ninja coverage-text -> generate only text report
Make all targets phony, the old legacy rules where just annoying as
you would have to remove the old report before being able to generate
a new one.
ninja coverage succeeds if it can generate at least one report.
ninja coverage-* only succeeds if it can generate the requested report
Modern gcovr includes html generation support so if lcov and
genhtml are not available fallback to gcovr.
Kept lcov and genhtml as default so to not surprise existing
users of coverage-html with the different output of gcovr.
gcovr added html support in 3.0 but as there already is a test
for 3.1 because of the changes to -r/--rootdir I opted to only
allow html generation for >= 3.1 to keep things simple.
In gcovr 3.1 the -r/--rootdir argument changed meaning causing
reports generated with gcovr 3.1 to not find the source files
and look for *.gcda in the whole source tree rather than the
build dir.
So, detect gcovr version and if 3.1 give build_root to -r instead
of source_root.
Cuurently, a set of directories is filtered out from the output based on
the location of system includes on most common linux distro's. This
commit does away with the blacklist and implements a whitelist approach:
only the files inside the source root are shown.
Print full destination path in 'Installing subdir ...' message,
including DESTDIR, consistent with other installation functions.
Use separate dst_dir and full_dst_dir variables to avoid mixing up
the order in the future and make code more readable.
Closes#3006.
- Pass exclude_files and exclude_directories relative to src_dir,
same as specified by user and documented in public install_subdir().
- Make do_copydir() interface similar to do_copyfile():
install src_dir contents to dst_dir.
- Remove src_prefix/src_dir code, it adds confusion and duplicates arguments.
Use single src_dir parameter instead.
- Make callers specify that src_dir contents should be installed
under dst_dir/basename(src_dir) if necessary.
- Use os.path.relpath() instead of string manipulations on paths.
- Add documentation to do_copydir(): specify types and add usage example.
According to Python documentation[1] dirname and basename
are defined as follows:
os.path.dirname() = os.path.split()[0]
os.path.basename() = os.path.split()[1]
For the purpose of better readability split() is replaced
by appropriate function if only one part of returned tuple
is used.
[1]: https://docs.python.org/3/library/os.path.html#os.path.split
Marco Trevisan (Treviño)
Thibault Saunier
Jussi Pakkanen
Christoph Reiter
Ross Burton
Nirbheek Chauhan
Niclas Moeslund Overby
Xavier Claessens
Philip Chimento
Filipe Brandenburger
Martin Kelly
Ryan Gonzalez
Sébastien Wilmet
Joel Klinghed
Fabrice Fontaine
Aleksey Filippov
Henk van der Laan
Félix Piédallu