According to http://testanything.org/tap-specification.html
"Any output line that is not a version, a plan, a test line, a
diagnostic or a bail out is considered an “unknown” line. A TAP parser
is required to not consider an unknown line as an error but may
optionally choose to capture said line and hand it to the test
harness, which may have custom behavior attached [...] TAP::Harness
reports TAP syntax errors at the end of a test run".
(glib gtest can generate empty lines)
The size of WINEPATH is limited (1024 [until recently]), we
can very easily reach that limit, and even the new one (2048) so
try to keep path as small as possible by using the shortPath
version of paths.
Also assert that we do not reach the new hard limit.
And avoid having duplicates in the list of path.
[until recently]: https://bugs.winehq.org/show_bug.cgi?id=45810
This started out with a bug report of mtest trying to add bytes + str,
which I though "Oh, mypy can help!" and turned into an entire day of
awful code traversal and trying to figure out why attributes were
changing type. Hopefully this makes everything cleaner and easier to
follow.
I wanted to look at the imports for annotations but was having hard time
reading them because they're just all over the place. This is purely a
human readability issue.
For consistency, it can be useful to have an explicit empty test suite list
for a test:
test('test-name', binary, suite: [])
This currently passes meson but fails when running meson tests:
Traceback (most recent call last):
File "/usr/lib/python3.7/site-packages/mesonbuild/mesonmain.py", line 122, in run
return options.run_func(options)
File "/usr/lib/python3.7/site-packages/mesonbuild/mtest.py", line 1005, in run
return th.doit()
File "/usr/lib/python3.7/site-packages/mesonbuild/mtest.py", line 756, in doit
self.run_tests(tests)
File "/usr/lib/python3.7/site-packages/mesonbuild/mtest.py", line 896, in run_tests
visible_name = self.get_pretty_suite(test)
File "/usr/lib/python3.7/site-packages/mesonbuild/mtest.py", line 875, in get_pretty_suite
rv = TestHarness.split_suite_string(test.suite[0])[0]
IndexError: list index out of range
Fix it by simply checking for the test suite to be a valid list we can pass on
Fixes#5340
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
* mtest: fix TAP with --verbose
TAP needs to process the test stdout even if --verbose is passed.
Capture it to a separate temporary file, and print it at the end
of the test if --verbose was passed.
In the future, we could parse it on the fly and print the result of
each TAP test point in verbose mode.
* Prefer "stderr is stdout" to "=="
The previous commit used "==" in accordance with the preexisting code,
but reviewers preferred using "is" instead. Fix both occurrences.
This provides an initial support for parsing TAP output. It detects failures
and skipped tests without relying on exit code, as well as early termination
of the test due to an error or a crash.
For now, subtests are not recorded in the TestRun object. However, because the
TAP output goes on stdout, it is printed by --print-errorlogs when a test does
not behave as expected. Handling subtests as TestRuns, and serializing them
to JSON, can be added later.
The parser was written specifically for Meson, and comes with its own
test suite.
Fixes#2923.
Hard errors also come from the GNU Automake test protocol. They happen when
e.g., the set-up of a test case scenario fails, or when some
other unexpected or highly undesirable condition is encountered.
TAP will use them for parse errors too. Add them to the exitcode protocol
first.
--print-errorlogs is using the test's return code to look for failed
tests, instead of just looking at the TestResult. Simplify the code and
make it work for TAP too.
If the global gdb option of mesontest is disabled (e.g. not set '--gdb')
and the gdb option of test_setup is enabled, an exception will be thrown.
Because signal.signal function can only be called from the main thread.
If attempting to call it from other threads will cause a ValueError exception to be raised.
When python sees an invalid character in a filename for the current locale,
instead of clobbering it, it saves is as an invalid codepoint called a
surrogate. We need to explicitly instruct the encoder to write those out
as-is. In the JSON file, we replace them instead to produce valid json.
$ flake8
./mesonbuild/mtest.py:524:9: E122 continuation line missing indentation or outdented
per PEP8, this line requires more indentation to distinguish it from the
following line
This makes it clear in the results that tests marked "should_fail"
exist. We also avoid the all caps output and make the classifications
unambigous compared to pytest or autotools' XFAIL/XPASS.
Before:
OK: 329
FAIL: 1
SKIP: 0
TIMEOUT: 0
After:
Ok: 323
Expected Fail: 1
Fail: 6
Unexpected Pass: 0
Skipped: 0
Timeout: 0
as instructed in the python docs, you should not use PIPE here. This can
lead to deadlocks, with massive testsuite output. Which was the case for efl.
For now the output of the tests is redirected into the a temp file, the
content from there can then be used to fill the TestRun structure.
This fixes test running problems in efl.
This has the adventage that "meson --help" shows a list of all commands,
making them discoverable. This also reduce the manual parsing of
arguments to the strict minimum needed for backward compatibility.
We used to immediately try to use whatever exe_wrapper was defined in
the cross file, but some people generate the cross file once and use
it for several projects, most of which do not even need an exe wrapper
to build.
Now we're a bit more resilient. We quietly fall back to using
non-exe-wrapper paths for compiler checks and skip the sanity check.
However, if some code needs the exe wrapper, f.ex., if you run a built
executable using custom_target() or run_target(), we will error out
during setup.
Tests will, of course, continue to error out when you run them if the
exe wrapper was not found. We don't want people's tests to silently
"pass" (aka skip) because of a bad CI setup.
Closes https://github.com/mesonbuild/meson/issues/3562
This commit also adds a test for the behaviour of exe_wrapper in these
cases, and refactors the unit tests a bit for it.
We already have code to fetch and find binaries specified in a cross
file, so use the same code for exe_wrapper. This allows us to handle
the same corner-cases that were fixed for other cross binaries.
When a test fails due to a signal (e.g., SIGSEGV) it can be somewhat
mysterious why the test failed. Also, even when a test fails due to a
non-zero exit status it would help if the exit status was reported. This
augments the result string to include the non-zero exit status or
signal number and name.
Resolves#3642
When the exe runner is `wine` or `wine32` or `wine64`, etc.
This allows people to run tests with wine.
Note that you also have to set WINEPATH to point to your custom
prefix(es) if your tests use external dependencies.
Closes https://github.com/mesonbuild/meson/issues/3620
Gerion Entrup
Dylan Baker
Marc-André Lureau
Aleksey Gurtovoy
Thibault Saunier
Michael Hirsch, Ph.D
Christoph Weiss
Jussi Pakkanen
Peter Hutterer
Paolo Bonzini
Paolo Bonzini
Eric Engestrom
Yeongjin Jeong
Olivier Crête
Jon Turney
Stian Selnes
Dave Reisner
Marcel Hollerbach
Xavier Claessens
Nirbheek Chauhan
Kurtis Rader
George Koehler
Alberto Sartori
Aleksey Filippov
nyorain
Alicia Boya García