This was added in f774609 to only change the access time of the
coredata file if the coredata struct actually changed. However,
this doesn't work as pickle serializations aren't guaranteed to
be stable. Instead, let's manually check if options have changed
values and skip the save if they haven't changed.
We also extend the associated unit test to cover all the option
types and to ensure that configure does get executed if one of the
options changes value.
This test is intended to test really long output, so it prints 100k
lines of stdout/stderr. It completes in two seconds on my machine, but
the default 30-second timeout is apparently too much for CI, because on
Windows we often get flaky tests due to this. e.g. we'll get within 200
lines of the end.
Bump the CI time by x2. We know this isn't particularly surprising
behavior, and allowing it to request another 30 seconds won't hang the
CI. But it will save us from some spurious failures and restarted jobs.
In commit eaf365cb3e we explicitly sorted
them for neatness, with the rationale that we were restoring intentional
behavior and we only need a set for stylistic purposes.
This actually wasn't true, because we never sorted them to begin with
(we did sort the version numbers), but sorting them is fine. The bigger
issue is that we actually used a set to avoid printing the same feature
type multiple times. Now we do print them multiple times -- because each
registered feature includes the unique node.
Fix this by using both sorted and a set.
Fix tests that should in retrospect have flagged this as an issue, but
were added later on in the same series to check something else entirely,
happen to cover this too, and were presumably copied directly from
stdout as-is...
We need to know the project minimum version before evaluating the rest
of the function. There's three basic approaches:
- try to set it inside KwargInfo
- just run a minimal version of func_project for this, then load
everything after
- drop down to the AST and set it before anything else
In order to handle FeatureNew emitted by a FunctionNode evaluated
before project() due to being inlined, such as `version: run_command()`,
only option 3 suffices, the rest all happen way too late. Since we have
just added AST handling support for erroring out, we can do that to set
the version as well.
If we add new kwargs to a function invoked on the first line, we also
need to validate the meson_version before erroring out due to unknown
kwargs. Even if the AST was successfully built.
Amusingly, we also get to improve the error message a bit. By passing
the AST node instead of an interpreter node, we get not just line
numbers, but also column offsets of the issueful meson_version. That
broke the stdout of another failing test; adapt it.
If the meson.build file is sufficiently "broken", even attempting to lex
and parse it will totally fail, and we error out without getting the
opportunity to evalaute the project() function. This can fairly easily
happen if we add new grammar to the syntax, which old versions of meson
cannot understand. Setting a minimum meson_version doesn't help, because
people with a too-old version of meson get parser errors instead of
advice about upgrading meson.
Examples of this include adding dict support to meson.
There are two general approaches to solving this issue, one of which
projects are empowered to do:
- refactor the project to place too-new syntax in a subdir() loaded
build file, so the root file can be interpreted
- teach meson to catch errors in building the initial AST, and just load
enough of the AST to check for meson_version advice
This implements the latter, allowing to future-proof the build
grammar.
These are necessary for projects outside Meson itself that want to
extend the 'meson install' functionality as meson-python does to
assemble Python package wheels from Meson projects.
Fixes#11426.
We do not need the python module's find_installation() for this, as this
does various things to set up building and installing python modules
(pure python and C-API). This functionality is already tested in the
python tests.
Elsewhere, when we just need an interpreter capable of running python
scripts in order to guarantee a useful scripting language for custom
commands, it suffices to use find_program(), which does not run an
introspection script or do module imports, and is thus faster and
a bit cleaner.
Either way, both methods are guaranteed to find the python3 interpreter,
deferring to mesonlib.python_command for that guarantee.
test "71 summary" can sometimes return the python command with the
".exe" part all uppercased for mysterious Windows reasons. Smooth this
over with ExternalProgram.
Rustc as of version 1.61.0 has support for controlling when
whole-archive linking takes place, previous to this it tried to make a
good guess about what you wanted, which worked most of the time. This is
now implemented.
Additionally, rustc makes some assumptions about library names
(specifically static names), that meson does not keep. This can be fixed
with rustc 1.67, where a new +verbatim modifier has been added. We can
then force rustc to use the name we give it. Before that, we can sneak
through `/WHOELARCHIVE:` in cases of dynamic linking (into a dll or
exe), but we can't force the archiver to do what we want (rustc
considers the archiver to be an implementation detail). The only
solution I can come up with is to copy the library to the format that
rustc expects. I've run into some issues with that as well, so we warn
in that case.
The decisions to leave static into static broken on MSVC for 1.61–1.66
was made because:
1) The work around is non-trivial, and we would have to support that
workaround for a long time
2) The number of users of Rust in Meson is small
3) The number of users of Rust in Meson on Windows, with MSVC is tiny
4) Using rustup to update rustc on windows is trivial, and solves the
problem completely
Fixes: #10723Fixes: #11247
Co-authored-by: Nirbheek Chauhan <nirbheek@centricular.com>
This method allows meson.build to introspect on the changed options.
It works by merely exposing the same set of data that is logged by
MesonApp._generate.
Fixes#10898
This adds two new methods, that are conceptually related in the same way
that `enable_auto_if` and `disable_auto_if` are. They are different
however, in that they will always replace an `auto` value with an
`enabled` or `disabled` value, or error if the feature is in the
opposite state (calling `feature(disabled).enable_if(true)`, for
example). This matters when the feature will be passed to
dependency(required : …)`, which has different behavior when passed an
enabled feature than an auto one.
The `disable_if` method will be controversial, I'm sure, since it
can be expressed via `feature.require()` (`feature.require(not
condition) == feature.disable_if(condition)`). I have two defences of
this:
1) `feature.require` is difficult to reason about, I would expect
require to be equivalent to `feature.enable_if(condition)`, not to
`feature.disable_if(not condition)`.
2) mixing `enable_if` and `disable_if` in the same call chain is much
clearer than mixing `require` and `enable_if`:
```meson
get_option('feat') \
.enable_if(foo) \
.disable_if(bar) \
.enable_if(opt)
```
vs
```meson
get_option('feat') \
.enable_if(foo) \
.require(not bar) \
.enable_if(opt)
```
In the first chain it's immediately obvious what is happening, in the
second, not so much, especially if you're not familiar with what
`require` means.
It's always been strange to me we don't have an opposite method of the
`disable_auto_if` method, but I've been pressed to find a case where we
_need_ one, because `disable_auto_if` can't be logically contorted to
work. I finally found the case where they're not equivalent: when you
don't want to convert to a boolean:
```meson
f = get_option('feat').disable_auto_if(not foo)
g = get_option('feat').enable_auto_if(foo)
dep1 = dependency('foo', required : f)
dep2 = dependency('foo', required : g)
```
gpgme has decided that config-tool is bad, which makes sense. They've
also decided that they will only install theirs, if gpg-error also
installs one, which is a bit... confusing. Anyway, it's impossible to
know whether it should or should not exist, so just accept that this
test is ready to be skipped on distros that currently no longer have
this ancient config-tool script.
Victory is within reach!
llvm-config is unsuitable for standard cross-compile,
because we need to build llvm especially for it, which
is not done is almost any distros, so, for example,
standard bootstrap chroot will be unsuitable.
This patch is trying to acheive feature parity between
config-tool searching of LLVM and CMake-based one,
which is arch-agnostic.
Signed-off-by: Konstantin <ria.freelander@gmail.com>
This test case checks stdout and demands a `dependency()` lookup fail.
The resulting error message can be different depending on whether cmake
is installed, or not. For cmake-specific tests we would simply skip the
test if cmake is not installed, but here we can just fine-tune the
pattern matching we use to determine if the test failed "correctly".
Fixes#11320
Currently Meson allow the following (Muon does not):
```meson
option('foo', type : 'boolean', value : 'true')
option('bar', type : 'integer', value : '42')
```
This is possibly a holdover from very old code, but it's a bad idea and
we should stop doing it. This deprecation is the first stop on that
journey.
We make use of allow_unknown=True here, which allows us to only look at
the common arguments in the main option parser, and then look at the
specific options in the dispatched parsers. This allows us to do more
specific checking on a per overload basis.
It is often more useful to generate shell script than dumping to stdout.
It is also important to be able to select the shell format.
Formats currently implemented:
- sh: Basic VAR=prepend_value:$VAR
- export: Same as 'sh', but also export VAR
- vscode: Same as 'sh', but without substitutions because they don't
seems to work. To be used in launch.json's envFile.
The code below this already handles being passed an Executable or
ExternalProgram, and it does it correctly, since it handles host
binaries that need an exe_wrapper correctly, while the code in the
generator paths doesn't.
The xcode backend is, like always, problematic, it doesn't handle things
the same way as the ninja and vscode backends, and generates a shell
script instead of using meson as a wrapper when needed (it seems likely
that just forcing the meson path for xcode would be better). I don't
have a working mac to develop a fix for, so I've left a todo comment
there.
Fixes: #11264
Generated objects can already be passed in the "objects" keyword argument
as long as you go through an extract_objects() indirection. Allow the
same even directly, since that is more intuitive than having to add them
to "sources".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hook this up to installed dependency manifests. This is often needed
above and beyond just an SPDX string -- e.g. many licenses have custom
copyright lines.
Darwin-based systems, at least macOS, provide various JDK executable
stubs in
/System/Library/Frameworks/JavaVM.framework/Versions/*/Commands.
These stubs are placed in such a way that they break the heuristics of
the JNI system dependency. If a javac being analyzed to find a Java home
is a stub, use /usr/libexec/java_home.
See https://stackoverflow.com/a/15133344/7572728 for more details.
Closes#11173
fix_jar() tries to remove an existing Class-Path entry from the jar
manifest by postprocessing the manifest and passing it to `jar -um`.
However, `jar -um` can only add/replace manifest entries, not remove
them, and it also complains loudly when replacing an entry:
Dec 13, 2022 7:11:19 PM java.util.jar.Attributes read
WARNING: Duplicate name in Manifest: Manifest-Version.
Ensure that the manifest does not have duplicate entries, and
that blank lines separate individual sections in both your
manifest and in the META-INF/MANIFEST.MF entry in the jar file.
Thus fix_jar() produces one such warning for each entry in the manifest
and accomplishes nothing else.
Use jar -uM instead. This completely removes the manifest from the jar
and allows adding it back as a normal zip member, fixing fix_jar() and
avoiding the warnings.
Fixes: https://github.com/mesonbuild/meson/issues/10491
Fixes: c70a051e93 ("java: remove manifest classpath from installed jar")
At least, if you tried to use it when passing an install_dir. Because
T.Sequence is horrible and we should never use it, and the annotations
are a lie that produces bugs.
So, fix the annotations on CustomTarget to never allow this to happen
again, and also fix the function too. Move some definitions elsewhere
inline to satisfy the linter.
Fixes#11157
This is no longer implicitly installed due to libxslt. Actually though,
we don't need to test this in order to ensure that the custom dependency
works -- we have other jobs that test it, and the config-tool handling
itself won't suddenly fail on msys2 specifically.
When auto-generating e.g. a `clang-format` target, we first check to see
if the user has already defined one, and if so we don't bother creating
our own. We check for two things:
- if a ninja target already exists, skip
- if a run_target was defined, skip
The second check is *obviously* a duplicate of the first check. But the
first check never actually worked, because all_outputs was only
generated *after* generating all utility rules and actually writing out
the build.ninja file. The check itself compares against nothing, and
always evaluates to false no matter what.
Fix this by reordering the target creation logic so we track outputs
immediately, but only error about them later. Now, we no longer need to
special-case run_target at all, so we can drop that whole logic from
build.py and interpreter.py, and simplify the tracked state.
Fixes defining an `alias_target()` for a utility, which tried to
auto-generate another rule and errored out. Also fixes doing the same
thing with a `custom_target()` although I cannot imagine why anyone
would want to produce an output file named `clang-format` (unless clang
itself decided to migrate to Meson, which would be cool but feels
unlikely).
Daan De Meyer
Jussi Pakkanen
Eli Schwartz
Xavier Claessens
Daniele Nicolodi
Dylan Baker
L. E. Segovia
Charles Brunet
Nirbheek Chauhan
Dudemanguy
Konstantin
Gijs Peskens
Thomas Li
Paolo Bonzini
Tristan Partin
Benjamin Gilbert
Marvin Scholz
David Robillard