# xDS (Load-Balancing) Interop Test Case Descriptions

Client and server use [test.proto](../src/proto/grpc/testing/test.proto).

## Server

The code for the xDS test server can be found at:
[Java](https://github.com/grpc/grpc-java/blob/master/interop-testing/src/main/java/io/grpc/testing/integration/XdsTestServer.java) (other language implementations are in progress).

Server should accept these arguments:

*   --port=PORT
    *   The port the server will run on.

## Client

The base behavior of the xDS test client is to send a constant QPS of unary
messages and record the remote-peer distribution of the responses. Further, the
client must expose an implementation of the `LoadBalancerStatsService` gRPC
service to allow the test driver to validate the load balancing behavior for a
particular test case (see below for more details).

The code for the xDS test client can be at:
[Java](https://github.com/grpc/grpc-java/blob/master/interop-testing/src/main/java/io/grpc/testing/integration/XdsTestClient.java) (other language implementations are in progress).

Clients should accept these arguments:

*   --fail_on_failed_rpcs=BOOL
    *   If true, the client should exit with a non-zero return code if any RPCs
        fail after at least one RPC has succeeded, indicating a valid xDS config
        was received. This accounts for any startup-related delays in receiving
        an initial config from the load balancer. Default is false.
*   --num_channels=CHANNELS
    *   The number of channels to create to the server.
*   --qps=QPS
    *   The QPS per channel.
*   --server=HOSTNAME:PORT
    *   The server host to connect to. For example, "localhost:8080"
*   --stats_port=PORT
    *   The port for to expose the client's `LoadBalancerStatsService`
        implementation.

## Test Driver

Note that, unlike our other interop tests, neither the client nor the server has
any notion of which of the following test scenarios is under test. Instead, a
separate test driver is responsible for configuring the load balancer and the
server backends, running the client, and then querying the client's
`LoadBalancerStatsService` to validate load balancer behavior for each of the
tests described below.

## LoadBalancerStatsService

The service is defined as:

```
message LoadBalancerStatsRequest {
  // Request stats for the next num_rpcs sent by client.
  int32 num_rpcs = 1;
  // If num_rpcs have not completed within timeout_sec, return partial results.
  int32 timeout_sec = 2;
}

message LoadBalancerStatsResponse {
  // The number of completed RPCs for each peer.
  map<string, int32> rpcs_by_peer = 1;
  // The number of RPCs that failed to record a remote peer.
  int32 num_failures = 2;
}

service LoadBalancerStatsService {
  // Gets the backend distribution for RPCs sent by a test client.
  rpc GetClientStats(LoadBalancerStatsRequest)
      returns (LoadBalancerStatsResponse) {}
}
```

Note that the `LoadBalancerStatsResponse` contains the remote peer distribution
of the next `num_rpcs` *sent* by the client after receiving the
`LoadBalancerStatsRequest`. It is important that the remote peer distribution be
recorded for a block of consecutive outgoing RPCs, to validate the intended
distribution from the load balancer, rather than just looking at the next
`num_rpcs` responses received from backends, as different backends may respond
at different rates.

## Test Cases

### ping_pong

This test verifies that every backend receives traffic.

Client parameters:

1.  --num_channels=1
1.  --qps=100
1.  --fail_on_failed_rpc=true

Load balancer configuration:

1.  4 backends are created in a single managed instance group (MIG).

Test driver asserts:

1.  All backends receive at least one RPC

### round_robin

This test verifies that RPCs are evenly routed according to an unweighted round
robin policy.

Client parameters:

1.  --num_channels=1
1.  --qps=100
1.  --fail_on_failed_rpc=true

Load balancer configuration:

1.  4 backends are created in a single MIG.

Test driver asserts that:

1.  Once all backends receive at least one RPC, the following 100 RPCs are
    evenly distributed across the 4 backends.

### backends_restart

This test verifies that the load balancer will resume sending traffic to a set
of backends that is stopped and then resumed.

Client parameters:

1.  --num_channels=1
1.  --qps=100

Load balancer configuration:

1.  4 backends are created in a single MIG.

Test driver asserts:

1.  All backends receive at least one RPC.

The test driver records the peer distribution for a subsequent block of 100 RPCs
then stops the backends.

Test driver asserts:

1.  No RPCs from the client are successful.

The test driver resumes the backends.

Test driver asserts:

1.  Once all backends receive at least one RPC, the distribution for a block of
    100 RPCs is the same as the distribution recorded prior to restart.

### secondary_locality_gets_requests_on_primary_failure

This test verifies that backends in a secondary locality receive traffic when
all backends in the primary locality fail.

Client parameters:

1.  --num_channels=1
1.  --qps=100

Load balancer configuration:

1.  The primary MIG with 2 backends in the same zone as the client
1.  The secondary MIG with 2 backends in a different zone

Test driver asserts:

1.  All backends in the primary locality receive at least 1 RPC.
1.  No backends in the secondary locality receive RPCs.

The test driver stops the backends in the primary locality.

Test driver asserts:

1.  All backends in the secondary locality receive at least 1 RPC.

The test driver resumes the backends in the primary locality.

Test driver asserts:

1.  All backends in the primary locality receive at least 1 RPC.
1.  No backends in the secondary locality receive RPCs.

### secondary_locality_gets_no_requests_on_partial_primary_failure

This test verifies that backends in a failover locality do not receive traffic
when at least one of the backends in the primary locality remain healthy.

**Note:** Future TD features may change the expected behavior and require
changes to this test case.

Client parameters:

1.  --num_channels=1
1.  --qps=100

Load balancer configuration:

1.  The primary MIG with 2 backends in the same zone as the client
1.  The secondary MIG with 2 backends in a different zone

Test driver asserts:

1.  All backends in the primary locality receive at least 1 RPC.
1.  No backends in the secondary locality receive RPCs.

The test driver stops one of the backends in the primary locality.

Test driver asserts:

1.  All backends in the primary locality receive at least 1 RPC.
1.  No backends in the secondary locality receive RPCs.

### new_instance_group_receives_traffic

This test verifies that new instance groups added to a backend service in the
same zone receive traffic.

Client parameters:

1.  --num_channels=1
1.  --qps=100
1.  --fail_on_failed_rpc=true

Load balancer configuration:

1.  One MIG with two backends, using rate balancing mode.

Test driver asserts:

1.  All backends receive at least one RPC.

The test driver adds a new MIG with two backends in the same zone.

Test driver asserts:

1.  All backends in each MIG receive at least one RPC.

### remove_instance_group

This test verifies that a remaining instance group can successfully serve RPCs
after removal of another instance group in the same zone.

Client parameters:

1.  --num_channels=1
1.  --qps=100

Load balancer configuration:

1.  Two MIGs with two backends each, using rate balancing mode.

Test driver asserts:

1.  All backends receive at least one RPC.

The test driver removes one MIG.

Test driver asserts:

1.  All RPCs are directed to the two remaining backends (no RPC failures).

### change_backend_service

This test verifies that the backend service can be replaced and traffic routed
to the new backends.

Client parameters:

1.  --num_channels=1
1.  --qps=100
1.  --fail_on_failed_rpc=true

Load balancer configuration:

1.  One MIG with two backends

Test driver asserts:

1.  All backends receive at least one RPC.

The test driver creates a new backend service containing a MIG with two backends
and changes the TD URL map to point to this new backend service.

Test driver asserts:

1.  All RPCs are directed to the new backend service.

### traffic_splitting

This test verifies that the traffic will be distributed between backend
services with the correct weights when route action is set to weighted
backend services.

Client parameters:

1.  --num_channels=1
1.  --qps=100

Load balancer configuration:

1.  One MIG with one backend

Assert:

1. Once all backends receive at least one RPC, the following 1000 RPCs are
all sent to MIG_a.

The test driver adds a new MIG with 1 backend, and changes the route action
to weighted backend services with {a: 20, b: 80}.

Assert:

1. Once all backends receive at least one RPC, the following 1000 RPCs are
distributed across the 2 backends as a: 20, b: 80.