This is a no-op, just reordering `requirements.lock`.
By providing `-r requirements.txt` to `pip freeze` it's able to break up
dependencies required via `requirements.txt`, and sub-dependencies
installed to satisfy them.
I've got a hypothesis that we're losing isolation between test shards
right now for "some reason".
This is a change to reflect test sharding in the port distribution that
we use, in an attempt to alleviate that.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
We should probably cap this so that our customers have a chance of
cloning the repository.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The following bugs are fixed:
* Missing ExecCtx in event engine endpoints and listeners
* Ref counting issue with iomgr endpoint which causes crashes in
overloaded situations
The PR includes a test which triggers these bugs by simulating an
overloaded system.
- Switched from yapf to black
- Reconfigure isort for black
- Resolve black/pylint idiosyncrasies
Note: I used `--experimental-string-processing` because black was
producing "implicit string concatenation", similar to what described
here: https://github.com/psf/black/issues/1837. While currently this
feature is experimental, it will be enabled by default:
https://github.com/psf/black/issues/2188. After running black with the
new string processing so that the generated code merges these `"hello" "
world"` strings concatenations, then I removed
`--experimental-string-processing` for stability, and regenerated the
code again.
To the reviewer: don't even try to open "Files Changed" tab 😄 It's
better to review commit-by-commit, and ignore `run black and isort`.
`cmake_ninja_vs2019` and `default` are using the same
`cmake_ninja_vs2019` so having two tests are waste so this is removing
`cmake_ninja_vs2019` leaving `default` which does `cmake_ninja_vs2019`.
This change can cut the space consumption by half and with 250GB disc,
- Pre-test: 267,770,322,944 bytes free
- Post-test: 134,499,295,232 bytes free
Do not clutter the final error we see at the end with the before/after
stats.
#### Examples
###### Expected only status A, but found status B for method M:
```
[ FAILED ] CustomLbTest.test_custom_lb_config
======================================================================
FAIL: test_custom_lb_config (__main__.CustomLbTest)
CustomLbTest.test_custom_lb_config
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/sergiitk/Development/grpc/tools/run_tests/xds_k8s_test_driver/tests/custom_lb_test.py", line 113, in test_custom_lb_config
self.assertRpcStatusCodes(test_client,
File "/Users/sergiitk/Development/grpc/tools/run_tests/xds_k8s_test_driver/framework/xds_k8s_testcase.py", line 345, in assertRpcStatusCodes
found_status = helpers_grpc.status_from_int(found_status_int)
AssertionError: Expected only status (15, DATA_LOSS), but found status (0, OK) for method UNARY_CALL.
Diff stats:
- method: UNARY_CALL
rpcs_started: 251
result:
(0, OK): 251
```
###### Expected non-zero RPCs with status A for method M.
```
[ FAILED ] AuthzTest.test_plaintext_allow
======================================================================
FAIL: test_plaintext_allow (__main__.AuthzTest)
AuthzTest.test_plaintext_allow
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/sergiitk/Development/grpc/tools/run_tests/xds_k8s_test_driver/tests/authz_test.py", line 224, in test_plaintext_allow
self.configure_and_assert(test_client, 'host-wildcard',
File "/Users/sergiitk/Development/grpc/tools/run_tests/xds_k8s_test_driver/tests/authz_test.py", line 204, in configure_and_assert
self.assertRpcStatusCodes(test_client,
File "/Users/sergiitk/Development/grpc/tools/run_tests/xds_k8s_test_driver/framework/xds_k8s_testcase.py", line 355, in assertRpcStatusCodes
self.assertGreater(stats.result[expected_status_int],
AssertionError: 0 not greater than 0 : Expected non-zero completed RPCs with status (0, OK) for method EMPTY_CALL.
Diff stats:
- method: EMPTY_CALL
rpcs_started: 13
result: {}
```
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
The approach of doing a recursive function call to expand the if checks
for known metadata names was tripping up an optimization clang has to
collapse that if/then tree into an optimized tree search over the set of
known strings. By unrolling that loop (with a code generator) we start
to present a pattern that clang *can* recognize, and hopefully get some
more stable and faster code generation as a benefit.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Improvements to the `LoadBalancerAccumulatedStatsRequest` output. Makes
it readable.
This greatly affects `assertRpcStatusCodes()` output, used in authz and
custom_lb.
No before and after stats, just useful diff stats from now. Minimal and
readable.
Also diff stats have `rpcs_started` now.
![image](https://github.com/grpc/grpc/assets/672669/a4e38d82-be5a-4f31-9d88-da2bf9712d9b)
Output example:
```
--- Starting subTest __main__.AuthzTest.test_plaintext_allow.01_host_wildcard ---
[psm-grpc-client-765bfbf868-jqjm7:51561] >> RPC LoadBalancerStatsService.GetClientAccumulatedStats(request=LoadBalancerAccumulatedStatsRequest({}), wait_for_ready=True, timeout=600)
[psm-grpc-client-765bfbf868-jqjm7:51561] >> RPC XdsUpdateClientConfigureService.Configure(request=ClientConfigureRequest({'types': ['EMPTY_CALL'], 'metadata': [{'key': 'test', 'value': 'host-wildcard'}]}), timeout=5, wait_for_ready=True)
[psm-grpc-client-765bfbf868-jqjm7:51561] >> RPC LoadBalancerStatsService.GetClientAccumulatedStats(request=LoadBalancerAccumulatedStatsRequest({}), wait_for_ready=True, timeout=600)
[psm-grpc-client-765bfbf868-jqjm7:51561] >> RPC LoadBalancerStatsService.GetClientAccumulatedStats(request=LoadBalancerAccumulatedStatsRequest({}), wait_for_ready=True, timeout=600)
[psm-grpc-client-765bfbf868-jqjm7] << Received accumulated stats difference. Expecting RPCs with status (0, OK) for method EMPTY_CALL.
- method: EMPTY_CALL
rpcs_started: 13
result:
(0, OK): 14
--- Finished subTest __main__.AuthzTest.test_plaintext_allow.01_host_wildcard ---
```
In case of test failure, it'll still print all stats at the end,
including before and after:
```
AssertionError: Expected only status (15, DATA_LOSS), but found status (0, OK) for method UNARY_CALL.
Stats before:
- method: UNARY_CALL
rpcs_started: 2153
result:
(14, UNAVAILABLE): 1674
(0, OK): 479
Stats after:
- method: UNARY_CALL
rpcs_started: 2404
result:
(0, OK): 730
(14, UNAVAILABLE): 1674
Diff stats:
- method: UNARY_CALL
rpcs_started: 251
result:
(0, OK): 251
```
And as I was at it, also made `LoadBalancerStatsResponse` nice:
![image](https://github.com/grpc/grpc/assets/672669/b15908a7-bae4-41a0-a2f7-c903e398432a)
Fixes the issue introduced in https://github.com/grpc/grpc/pull/33104,
where stopping the current run didn't reset `self.time_start_requested`,
`self.time_start_completed`, `self.time_start_stopped`. Because of this,
the subsetting test (the only one [redeploying the client
app](10001d16a9/tools/run_tests/xds_k8s_test_driver/tests/subsetting_test.py (L73C1-L74)))
started failing with:
```py
Traceback (most recent call last):
File "xds_k8s_test_driver/tests/subsetting_test.py", line 76, in test_subsetting_basic
test_client: _XdsTestClient = self.startTestClient(
File "xds_k8s_test_driver/framework/xds_k8s_testcase.py", line 615, in startTestClient
test_client = self.client_runner.run(server_target=test_server.xds_uri,
File "xds_k8s_test_driver/framework/test_app/runners/k8s/k8s_xds_client_runner.py", line 110, in run
super().run()
File "xds_k8s_test_driver/framework/test_app/runners/k8s/k8s_base_runner.py", line 112, in run
raise RuntimeError(
RuntimeError: Deployment psm-grpc-client: has already been started at 2023-05-27T13:47:15.262461
```
This PR:
1. Instead of relying on the `time_start_requested`,
`time_start_stopped` to produce GCP links, tracks the history run of
each deployment. This fixes the issue described above, and adds support
for listing all past runs executed by a k8s runner.
2. Minor: remove the unnecessary call to `test_client.cleanup()` when
there's no past deployment runs (e.g. at the first iteration of `for i
in range(_NUM_CLIENTS):`)
- switch to json_object_loader for config parsing
- use `absl::string_view` instead of `const char*` for cert provider
names
- change cert provider registry to use a map instead of a vector
- remove unused mesh_ca cert provider factory
Allow for multiple `--grpc_experiments`, `--grpc_trace` command line
arguments to be added, accumulate them, and provide them to gRPC as one
thing.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
`tools/run_tests/sanity/check_absl_mutex.sh` was broken, a missing paren
crashed the script if run locally. It's unclear yet how our sanity
checks were not complaining about this, `run_tests.py` does not save the
log.
I've noticed we add the cleanup hook after setting up the
infrastructure. Thus, if infra setup failed, the cleanup won't work.
This fixes it, and adds extra checks to not call
`cls.test_client_runner` if it's not set.
Fail test if client or server pods restarted during test.
#### Testing
Tested locally, test will fail with message similar to:
```
----------------------------------------------------------------------
Traceback (most recent call last):
File "/usr/local/google/home/xuanwn/workspace/xds/grpc/tools/run_tests/xds_k8s_test_driver/framework/xds_k8s_testcase.py", line 501, in tearDown
))
AssertionError: 5 != 0 : Server pods unexpectedly restarted {sever_restarts} times during test.
----------------------------------------------------------------------
Ran 1 test in 886.867s
```
Better logging for `assertRpcStatusCodes`.
(got tired of looking up the status names)
#### Unexpected status found
Before:
```
AssertionError: AssertionError: Expected only status 15 but found status 0 for method UNARY_CALL:
stats_per_method {
key: "UNARY_CALL"
value {
result {
key: 0
value: 251
}
}
}
```
After:
```
AssertionError: Expected only status (15, DATA_LOSS), but found status (0, OK) for method UNARY_CALL:
stats_per_method {
key: "UNARY_CALL"
value {
result {
key: 0
value: 251
}
}
}
```
#### No traffic with expected status
Before:
```
AssertionError: 0 not greater than 0
```
After:
```
AssertionError: 0 not greater than 0 : Expected non-zero RPCs with status (15, DATA_LOSS) for method UNARY_CALL, got:
stats_per_method {
key: "UNARY_CALL"
value {
result {
key: 0
value: 251
}
result {
key: 15
value: 0
}
}
}
```
Before this change, `Found subchannel in state READY` and `Channel to
xds:///psm-grpc-server:61404 transitioned to state ` would dump the full
channel/subchannel, in some implementations that expose
ChannelData.trace (f.e. go) would add 300 extra lines of log.
Now we print a brief repr-like chanel/subchannel info:
```
Found subchannel in state READY: <Subchannel subchannel_id=9 target=10.110.1.44:8080 state=READY>
Channel to xds:///psm-grpc-server:61404 transitioned to state READY: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=READY>
```
Also while waiting for the channel, we log channel_id now too:
```
Waiting to report a READY channel to xds:///psm-grpc-server:61404
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=TRANSIENT_FAILURE>
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=TRANSIENT_FAILURE>
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=TRANSIENT_FAILURE>
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=TRANSIENT_FAILURE>
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=TRANSIENT_FAILURE>
Server channel: <Channel channel_id=2 target=xds:///psm-grpc-server:61404 state=READY>
```
Similar to what we already do in other test suites:
- Try cleaning up resources three times.
- If unsuccessful, don't fail the test and just log the error. The
cleanup script should be the one to deal with this.
ref b/282081851
Add a new binary that runs all core end2end tests in fuzzing mode.
In this mode FuzzingEventEngine is substituted for the default event
engine. This means that time is simulated, as is IO. The FEE gets
control of callback delays also.
In our tests the `Step()` function becomes, instead of a single call to
`completion_queue_next`, a series of calls to that function and
`FuzzingEventEngine::Tick`, driving forward the event loop until
progress can be made.
PR guide:
---
**New binaries**
`core_end2end_test_fuzzer` - the new fuzzer itself
`seed_end2end_corpus` - a tool that produces an interesting seed corpus
**Config changes for safe fuzzing**
The implementation tries to use the config fuzzing work we've previously
deployed in api_fuzzer to fuzz across experiments. Since some
experiments are far too experimental to be safe in such fuzzing (and
this will always be the case):
- a new flag is added to experiments to opt-out of this fuzzing
- a new hook is added to the config system to allow variables to
re-write their inputs before setting them during the fuzz
**Event manager/IO changes**
Changes are made to the event engine shims so that tcp_server_posix can
run with a non-FD carrying EventEngine. These are in my mind a bit
clunky, but they work and they're in code that we expect to delete in
the medium term, so I think overall the approach is good.
**Changes to time**
A small tweak is made to fix a bug initializing time for fuzzers in
time.cc - we were previously failing to initialize
`g_process_epoch_cycles`
**Changes to `Crash`**
A version that prints to stdio is added so that we can reliably print a
crash from the fuzzer.
**Changes to CqVerifier**
Hooks are added to allow the top level loop to hook the verification
functions with a function that steps time between CQ polls.
**Changes to end2end fixtures**
State machinery moves from the fixture to the test infra, to keep the
customizations for fuzzing or not in one place. This means that fixtures
are now just client/server factories, which is overall nice.
It did necessitate moving some bespoke machinery into
h2_ssl_cert_test.cc - this file is beginning to be problematic in
borrowing parts but not all of the e2e test machinery. Some future PR
needs to solve this.
A cq arg is added to the Make functions since the cq is now owned by the
test and not the fixture.
**Changes to test registration**
`TEST_P` is replaced by `CORE_END2END_TEST` and our own test registry is
used as a first depot for test information.
The gtest version of these tests: queries that registry to manually
register tests with gtest. This ultimately changes the name of our tests
again (I think for the last time) - the new names are shorter and more
readable, so I don't count this as a regression.
The fuzzer version of these tests: constructs a database of fuzzable
tests that it can consult to look up a particular suite/test/config
combination specified by the fuzzer to fuzz against. This gives us a
single fuzzer that can test all 3k-ish fuzzing ready tests and cross
polinate configuration between them.
**Changes to test config**
The zero size registry stuff was causing some problems with the event
engine feature macros, so instead I've removed those and used GTEST_SKIP
in the problematic tests. I think that's the approach we move towards in
the future.
**Which tests are included**
Configs that are compatible - those that do not do fd manipulation
directly (these are incompatible with FuzzingEventEngine), and those
that do not join threads on their shutdown path (as these are
incompatible with our cq wait methodology). Each we can talk about in
the future - fd manipulation would be a significant expansion of
FuzzingEventEngine, and is probably not worth it, however many uses of
background threads now should probably evolve to be EventEngine::Run
calls in the future, and then would be trivially enabled in the fuzzers.
Some tests currently fail in the fuzzing environment, a
`SKIP_IF_FUZZING` macro is used for these few to disable them if in the
fuzzing environment. We'll burn these down in the future.
**Changes to fuzzing_event_engine**
Changes are made to time: an exponential sweep forward is used now -
this catches small time precision things early, but makes decade long
timers (we have them) able to be used right now. In the future we'll
just skip time forward to the next scheduled timer, but that approach
doesn't yet work due to legacy timer system interactions.
Changes to port assignment: we ensure that ports are legal numbers
before assigning them via `grpc_pick_port_or_die`.
A race condition between time checking and io is fixed.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Resolve `TESTING_VERSION` to `dev-VERSION` when the job is initiated by
a user, and not the CI. Override this behavior with setting
`FORCE_TESTING_VERSION`.
This solves the problem with the manual job runs executed against a WIP
branch (f.e. a PR) overriding the tag of the CI-built image we use for
daily testing.
The `dev` and `dev-VERSION` "magic" values supported by the
`--testing_version` flag:
- `dev` and `dev-master` and treated as `master`: all
`config.version_gte` checks resolve to `True`.
- `dev-VERSION` is treated as `VERSION`: `dev-v1.55.x` is treated as
simply `v1.55.x`. We do this so that when manually running jobs for old
branches the feature skip check still works, and unsupported tests are
skipped.
This changes will take care of all langs/branches, no backports needed.
ref b/256845629
Previously the error message didn't provide much context, example:
```py
Traceback (most recent call last):
File "/tmpfs/tmp/tmp.BqlenMyXyk/grpc/tools/run_tests/xds_k8s_test_driver/tests/affinity_test.py", line 127, in test_affinity
self.assertLen(
AssertionError: [] has length of 0, expected 1.
```
ref b/279990584.
This PR implements a work-stealing thread pool for use inside
EventEngine implementations. Because of historical risks here, I've
guarded the new implementation behind an experiment flag:
`GRPC_EXPERIMENTS=work_stealing`. Current default behavior is the
original thread pool implementation.
Benchmarks look very promising:
```
bazel test \
--test_timeout=300 \
--config=opt -c opt \
--test_output=streamed \
--test_arg='--benchmark_format=csv' \
--test_arg='--benchmark_min_time=0.15' \
--test_arg='--benchmark_filter=_FanOut' \
--test_arg='--benchmark_repetitions=15' \
--test_arg='--benchmark_report_aggregates_only=true' \
test/cpp/microbenchmarks:bm_thread_pool
```
2023-05-04: `bm_thread_pool` benchmark results on my local machine (64
core ThreadRipper PRO 3995WX, 256GB memory), comparing this PR to
master:
![image](https://user-images.githubusercontent.com/295906/236315252-35ed237e-7626-486c-acfa-71a36f783d22.png)
2023-05-04: `bm_thread_pool` benchmark results in the Linux RBE
environment (unsure of machine configuration, likely small), comparing
this PR to master.
![image](https://user-images.githubusercontent.com/295906/236317164-2c5acbeb-fdac-4737-9b2d-4df9c41cb825.png)
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: Sergii Tkachenko <hi@sergii.org>
Reverts grpc/grpc#32924. This breaks the build again, unfortunately.
From `test/core/event_engine/cf:cf_engine_test`:
```
error: module .../grpc/test/core/event_engine/cf:cf_engine_test does not depend on a module exporting 'grpc/support/port_platform.h'
```
@sampajano I recommend looking into CI tests to catch iOS problems
before merging. We can enable EventEngine experiments in the CI
generally once this PR lands, but this broken test is not one of those
experiments. A normal build should have caught this.
cc @HannahShiSFB
Makes some awkward fixes to compression filter, call, connected channel
to hold the semantics we have upheld now in tests.
Once the fixes described here
https://github.com/grpc/grpc/blob/master/src/core/lib/channel/connected_channel.cc#L636
are in this gets a lot less ad-hoc, but that's likely going to be
post-landing promises client & server side.
We specifically need special handling for server side cancellation in
response to reads wrt the inproc transport - which doesn't track
cancellation thoroughly enough itself.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
- Fix broken `bin/run_channelz.py` helper
- Create `bin/run_ping_pong.py` helper that runs the baseline (aka
"ping_pong") test against preconfigured infra
- Setup automatic port forwarding when running `bin/run_channelz.py` and
`bin/run_ping_pong.py`
- Create `bin/cleanup_cluster.sh` helper to wipe xds out resources based
namespaces present on the cluster
Note: this involves a small change to the non-helper code, but it's just
moving a the part that makes XdsTestServer/XdsTestClient instance for a
given pod.
Audit logging APIs for both built-in loggers and third-party logger
implementations.
C++ uses using decls referring to C-Core APIs.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Third-party loggers will be added in subsequent PRs once the logger
factory APIs are available to validate the configs here.
This registry is used in `xds_http_rbac_filter.cc` to generate service
config json.