Change was created by the release automation script. See go/grpc-release.
Closes#37279
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/37279 from drfloob:bump_dev_version_202407222027 4e6607411e
PiperOrigin-RevId: 654925894
Change was created by the release automation script. See go/grpc-release.
Closes#37276
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/37276 from drfloob:bump_core_version_202407221838 7f287d8546
PiperOrigin-RevId: 654867615
[Gpr_To_Absl_Logging] Remove GRPC_API_TRACE .
This will be replaced by GRPC_TRACE_LOG
Closes#37190
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/37190 from tanvi-jagtap:grpc_api_trace_fix 6dae72bc6e
PiperOrigin-RevId: 652397141
Instead of passing the transport byte counts back up through the filter
stack to be reported to the `CallTracer`, we now have the transport
pass the transport byte counts directly to the `CallTracer` itself.
This will eventually allow us to avoid unnecessarily storing these byte
counts in cases where no `CallTracer` actually cares about the data, which
will reduce per-call memory. (In the short term, it actually increases
memory usage, but we can separately do some work to avoid the memory
usage in the transport by removing the `grpc_transport_stream_stats`
struct from the legacy filter API.)
This is a prereq for supporting `CallTracer` in the new call v3 stack,
which does not include the transport byte counts as part of the
receieve-trailing-metadata hook, unlike the legacy filter stack.
This change is controlled by the `call_tracer_in_transport` experiment,
which is enabled by default.
As part of this experiment, we also fix a couple of related bugs:
- On the client side, the chttp2 transport was incorrectly adding
annotations to the parent `ClientCallTracer` instead of the
`CallAttemptTracer`.
- The OpenCensus `ServerCallTracer` was incorrectly swapping the values
of sent and received bytes.
PiperOrigin-RevId: 650728181
This allows CallTracers to be created with parameters dictated by
channel args.
For the moment, I've used the EventEngine `EndpointConfig` API to expose
the channel args here, so as to avoid directly exposing
`grpc_core::ChannelArgs`. We should determine a better API here before
we de-experimentalize the stats APIs.
Also add an experiment to be used in a subsequent PR.
PiperOrigin-RevId: 647730284
Previously, metadata mutations were made by the picker directly, which meant that they would be applied even if the channel winds up discarding the pick due to the returned subchannel having been disconnected by the time the pick result is returned. This changes the API such that pickers return metadata mutations along with the pick result, so that the mutations won't get applied unless the pick result is actually used.
Closes#36968
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36968 from markdroth:lb_metadata_api 2765da6121
PiperOrigin-RevId: 645451869
Specifically:
- use `OrphanablePtr<>` for `grpc_endpoint`
- use `absl::AnyInvocable<>` instead of `grpc_closure`
- use `EventEngine::Run()` instead of `ExecCtx::Run()`
- use `SliceBuffer` instead of `grpc_slice_buffer`
- use `absl::Status` instead of `grpc_error_handle`
- use `absl::string_view` instead of `const char*` for handshaker names
Also pass acceptor via `HandshakerArgs` instead of as a separate parameter.
Also changed chttp2 and httpcli to use `OrphanablePtr<>` for the endpoint.
PiperOrigin-RevId: 644551906
Preparation for switching away from `grpc_channel_filter*` to identify channel filters.
Closes#36907
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36907 from ctiller:type-name e7ad4c67a2
PiperOrigin-RevId: 644483948
This change brings up the direct channel, and inproc promise based transports.
This work exposed a bug that was very difficult to fix with the current call_filters.cc implementation, so I've substantially revamped that - instead of having a pipe-like object per call element, we now have a big ol' combined state machine for the entire call. It's a touch more code, but substantially easier to reason about individual cases, so I much prefer this form (it's also a slight memory improvement: 12 bytes total to track call state, and 10 of those are wakeup bitmasks...).
Closes#36734
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36734 from ctiller:transport-refs-9 3e2a80b40d
PiperOrigin-RevId: 644034593
Change was created by the release automation script. See go/grpc-release.
Closes#36892
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36892 from XuanWang-Amos:bump_dev_version_202406112301 9b2898d716
PiperOrigin-RevId: 643027546
See https://github.com/grpc/proposal/pull/426
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#36447
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36447 from yousukseung:generic-stub-service-refactor 1cc0cbdc4b
PiperOrigin-RevId: 642774012
Change was created by the release automation script. See go/grpc-release.
Closes#36887
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36887 from XuanWang-Amos:bump_core_version_202406111526 5df15650dd
PiperOrigin-RevId: 642358496
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#36729
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36729 from yijiem:per-channel-stats-plugin 4786bed42f
PiperOrigin-RevId: 642030366
All TraceFlags are now configured in `src/core/lib/debug/trace_flags.yaml`. The format is:
```
my_flag:
default: false # the default value; default=false
description: Some Description
debug_only: false # debug_only flags only work in debug builds; default=false
internal: false # internal flags will not show up in documentation; default=false
```
To regenerate the trace flag source code, run `tools/codegen/core/gen_trace_flags.py` (requires mako). This script is also run when sanity checking.
This PR also adds two new features:
### Glob-based flag configuration
Trace flag configuration now supports `?` (single wildcard character) and `*` (one or more wildcard characters). For example, using `GRPC_TRACE='event_engine*'` will enable all flags that match that glob. It expands to:
* event_engine
* event_engine_client_channel_resolver
* event_engine_dns
* event_engine_endpoint
* event_engine_endpoint_data
* event_engine_poller
### A cleaner trace-logging macro in abseil logging format
If your goal is only to add log statements when the `fault_injection_filter` trace flag is enabled, you can use the macro:
```
GRPC_TRACE_LOG(fault_injection, INFO) << "Filtered:" << 42;
```
When the trace flag is enabled, the the log will show something like this:
```
I0000 00:00:1715733657.430042 16 file.cc:174] Filtered:42
```
----
Note: just like with the gpr_log to abseil logging conversion, the pre-existing trace logging usages can be replaced with the new tracing macro across multiple PRs.
Closes#36576
PiperOrigin-RevId: 641295215
Usage: `bazel build --config=clang-cl --build_tag_filters=-no_windows :all`
The highlight, for me anyway: thread safety annotation checking can now be done on Windows-only code.
clang-cl's interpretation of `-Wall` differs from that of clang on linux. This PR uses the set of warnings enabled on linux, and whittles down the list until all builds pass. I left comments in `copts.bzl` describing the warnings, many of which can be removed with targeted code cleanups.
Closes#36831
PiperOrigin-RevId: 641009783
This gives grpc_endpoint the same destruction-is-shutdown semantic as
EventEngine::Endpoint, which will make the migration easier.
PiperOrigin-RevId: 639867616
The following attributes were completely unused:
- kOffset
- kIndex
- kSize
- kFilename
- kKey
- kValue
The following attributes were added but never programmatically accessed, and I've moved them into the status messages themselves, which is another step toward #22883:
- kErrorNo
- kTsiCode
- kWsaError
- kHttpStatus
- kOsError
- kSyscall
- kTargetAddress
- kRawBytes
- kTsiError
Closes#36523
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36523 from markdroth:grpc_error_attribute_cleanup b289c399fe
PiperOrigin-RevId: 639147583
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging - BUILD
In this CL we are just editing the build and bzl files to add dependencies.
This is done to prevent merge conflict and constantly having to re-make the make files using generate_projects.sh for each set of changes.
Closes#36589
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36589 from tanvi-jagtap:build_root_01 7c56762548
PiperOrigin-RevId: 633408076
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#36509
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36509 from ctiller:transport-refs-3 2771a2b0e1
PiperOrigin-RevId: 633240374
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging - BUILD
In this CL we are just editing the build and bzl files to add dependencies.
This is done to prevent merge conflict and constantly having to re-make the make files using generate_projects.sh for each set of changes.
Closes#36591
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36591 from tanvi-jagtap:build_root_02 62ee245c88
PiperOrigin-RevId: 633209659
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging - BUILD
In this CL we are just editing the build and bzl files to add dependencies.
This is done to prevent merge conflict and constantly having to re-make the make files using generate_projects.sh for each set of changes.
Closes#36587
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36587 from tanvi-jagtap:build_include 2a167f6e52
PiperOrigin-RevId: 633201049
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging - gpr_log
In this CL we are migrating from gRPCs own gpr logging mechanism to absl logging mechanism. The intention is to deprecate gpr_log in the future.
We have the following mapping
1. gpr_log(GPR_INFO,...) -> LOG(INFO)
2. gpr_log(GPR_ERROR,...) -> LOG(ERROR)
3. gpr_log(GPR_DEBUG,...) -> VLOG(2)
Reviewers need to check :
1. If the above mapping is correct.
2. The content of the log is as before.
gpr_log format strings did not use string_view or std::string . absl LOG accepts these. So there will be some elimination of string_view and std::string related conversions. This is expected.
Closes#36578
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36578 from tanvi-jagtap:all_build_changes_tjagtap bba460331a
PiperOrigin-RevId: 632458570
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging - gpr_log
In this CL we are migrating from gRPCs own gpr logging mechanism to absl logging mechanism. The intention is to deprecate gpr_log in the future.
We have the following mapping
1. gpr_log(GPR_INFO,...) -> LOG(INFO)
2. gpr_log(GPR_ERROR,...) -> LOG(ERROR)
3. gpr_log(GPR_DEBUG,...) -> VLOG(2)
Reviewers need to check :
1. If the above mapping is correct.
2. The content of the log is as before.
gpr_log format strings did not use string_view or std::string . absl LOG accepts these. So there will be some elimination of string_view and std::string related conversions. This is expected.
Closes#36579
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36579 from tanvi-jagtap:actual_all_build_changes_tjagtap 49b69025c3
PiperOrigin-RevId: 632430880
Change was created by the release automation script. See go/grpc-release.
Closes#36544
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36544 from yashykt:bump_dev_version_202405061956 69ee5c869e
PiperOrigin-RevId: 631187829
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging GPR_ASSERT
Replacing GPR_ASSERT with absl CHECK.
These changes have been made using string replacement and regex.
Will not be replacing all instances of CHECK with CHECK_EQ , CHECK_NE etc because there are too many callsites. Only ones which are doable using very simple regex with least chance of failure will be replaced.
Given that we have 5000+ instances of GPR_ASSERT to edit, Doing it manually is too much work for both the author and reviewer.
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#36468
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36468 from tanvi-jagtap:tjagtap_src_core_lib_gprpp f7ed931db1
PiperOrigin-RevId: 630978821
[grpc][Gpr_To_Absl_Logging] Migrating from gpr to absl logging GPR_ASSERT
Replacing GPR_ASSERT with absl CHECK.
These changes have been made using string replacement and regex.
Will not be replacing all instances of CHECK with CHECK_EQ , CHECK_NE etc because there are too many callsites. Only ones which are doable using very simple regex with least chance of failure will be replaced.
Given that we have 5000+ instances of GPR_ASSERT to edit, Doing it manually is too much work for both the author and reviewer.
Closes#36504
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36504 from tanvi-jagtap:tjagtap_src_ext_transport_binder 4669996fd8
PiperOrigin-RevId: 630652010
Craig Tiller
AJ Heller
Tanvi Jagtap
Mark D. Roth
Xuan Wang
Yousuk Seung
Yijie Ma
John Cormie
Nana Pang
gRPC Team Bot
Yash Tibrewal