It looks like this ended up getting deleted in https://github.com/grpc/grpc/pull/34350 probably when merging.
Also, the `Init` method in the otel test library is getting unwieldy. I'm going to send out a follow-up PR to convert this into a builder instead.
Closes#35532
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#35210
Make sure there is no unnecessary delays when there are multiple reports in the queue.
This change also adds a test for the custom LB policy.
Closes#35467
Adapts work from https://github.com/grpc/grpc/pull/34728 and previous changes from @nanahpang, implements new v3 filter/transport interface, and brings up the core of the chaotic good transport.
The next change will bring a more complete test suite (for this and inproc).
Closes#35400
Eventually for call-v3 we're going to want to have registration of filters generate the appropriate glue into the channel runtime to execute a call.
Begin that process now and gradually by introducing the new syntax and allowing a piecemeal migration to it - by the time we're done converting filters to the v3 APIs we'll also have the registration piece done.
PiperOrigin-RevId: 596013927
Mirrors what we had with combiner, but allows it to occur at arbitrary points.
We'll use this in chaotic-good to:
1. combine fragments into a single frame
2. combine writes from different calls into a single syscall
Closes#35413
We encountered an api_fuzzer test case that adds a huge number of addresses that all immediately fail to connect, but it set max_backoff to 0, so there was a giant busy loop where pick_first was constantly trying to connect to subchannels with no delay. The FuzzingEventEngine was getting stuck in a tick loop, always accumulating more tasks that needed to be executed immediately, so it could never make forward progress on the test case.
This PR fixes the problem by adding a fixed 1us delay if the task's delay is 0 and the test case has not provided any more fixed delays.
(Unfortunately, I cannot include the test case that triggered the problem in this PR, because it winds up exceeding the RBE stdout limit.)
Fixes b/310664846.
Closes#35447
- `memory_pressure_controller` finally - allows deletion of pid_controller throughout the codebase
- `overload_protection` - one of the http2 rapid reset mitigations
- `red_max_concurrent_streams` - another http2 rapid reset mitigation
Closes#35426
Remove the old `switch` library - this used to be an implementation detail of `Seq`, `TrySeq` - but has become unused.
Add a new user facing primitive `Switch` that fills a similar role to `switch` in C++ - selecting a promise to execute based on a primitive discriminator - much like `If` allows selection based on a boolean discriminator now.
A future change will optimize this to actually lower the `Switch` into an actual `switch` statement, but for right now I want to get the functionality in.
Closes#35424
Provide a public experimental API and bazel compatible build target for OpenTelemetry metrics.
Details -
* New `OpenTelemetryPluginBuilder` class that provides the API specified in https://github.com/grpc/proposal/blob/master/A66-otel-stats.md
* The existing `grpc::internal::OpenTelemetryPluginBuilder` class is moved to `grpc::internal::OpenTelemetryPluginBuilderImpl` for disambiguation.
* Renamed `OTel` in some instances to `OpenTelemetry` for consistency.
Closes#35348
Adds temporary `call.cc` and `connected_channel.cc` scaffolding to run `CallInterceptor`/`CallHandler` style calls.
This will get ripped out as soon as the v3 transition is completed.
Closes#35312
This is a prerequisite change to start supporting Bazel 7. Changes are
- Disabled bzlmod which Bazel 7 begins to enable by default. This eventually needs to be done to support bzlmod but not now.
- Upgraded some bazel rule dependencies which are required to support Bazel 7.
- Using Python 3 explcitly as Bazel 7 begins to reject Python 2.
Note that this isn't enough to enable Bazel 7 by default and another PR will follow for that.
Closes#35374
Previously, `RefCountedPtr<>` and `WeakRefCountedPtr<>` incorrectly allowed
implicit casting of any type to any other type. This hadn't caused a
problem until recently, but now that it has, we need to fix it. I have
fixed this by changing these smart pointer types to allow type
conversions only when the type used is convertible to the type of the
smart pointer. This means that if `Subclass` inherits from `Base`, then
we can set a `RefCountedPtr<BaseClass>` to a value of type
`RefCountedPtr<Subclass>`, but we cannot do the reverse.
We had been (ab)using this bug to make it more convenient to deal with
down-casting in subclasses of ref-counted types. For example, because
`Resolver` inherits from `InternallyRefCounted<Resolver>`, calling
`Ref()` on a subclass of `Resolver` will return `RefCountedPtr<Resolver>`
rather than returning the subclass's type. The ability to implicitly
convert to the subclass type made this a bit easier to deal with. Now
that that ability is gone, we need a different way of dealing with that
problem.
I considered several ways of dealing with this, but none of them are
quite as ergonomic as I would ideally like. For now, I've settled on
requiring callers to explicitly down-cast as needed, although I have
provided some utility functions to make this slightly easier:
- `RefCounted<>`, `InternallyRefCounted<>`, and `DualRefCounted<>` all
provide a templated `RefAsSubclass<>()` method that will return a new
ref as a subclass. The type used with `RefAsSubclass()` must be a
subclass of the type passed to `RefCounted<>`, `InternallyRefCounted<>`,
or `DualRefCounted<>`.
- In addition, `DualRefCounted<>` provides a templated `WeakRefAsSubclass<T>()`
method. This is the same as `RefAsSubclass()`, except that it returns
a weak ref instead of a strong ref.
- In `RefCountedPtr<>`, I have added a new `Ref()` method that takes
debug tracing parameters. This can be used instead of calling `Ref()`
on the underlying object in cases where the caller already has a
`RefCountedPtr<>` and is calling `Ref()` only to specify the debug
tracing parameters. Using this method on `RefCountedPtr<>` is more
ergonomic, because the smart pointer is already using the right
subclass, so no down-casting is needed.
- In `WeakRefCountedPtr<>`, I have added a new `WeakRef()` method that
takes debug tracing parameters. This is the same as the new `Ref()`
method on `RefCountedPtr<>`.
- In both `RefCountedPtr<>` and `WeakRefCountedPtr<>`, I have added a
templated `TakeAsSubclass<>()` method that takes the ref out of the
smart pointer and returns a new smart pointer of the down-casted type.
Just as with the `RefAsSubclass()` method above, the type used with
`TakeAsSubclass()` must be a subclass of the type passed to
`RefCountedPtr<>` or `WeakRefCountedPtr<>`.
Note that I have *not* provided an `AsSubclass<>()` variant of the
`RefIfNonZero()` methods. Those methods are used relatively rarely, so
it's not as important for them to be quite so ergonomic. Callers of
these methods that need to down-cast can use
`RefIfNonZero().TakeAsSubclass<>()`.
PiperOrigin-RevId: 592327447
`AllOk` runs a set of promises concurrently, and like `TryJoin` waits for them all to succeed or one to fail.
Unlike `TryJoin` it returns a single unified status of the composition, so cannot handle member promises that might return `StatusOr` or the like.
Closes#35304
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#35306
, which should be landed first
Always fail parsing when `grpclb_client_stats` is included in headers -- it's a meaningless value and the only reason to include it would be some sort of attack.
Closes#35279
The `DirectoryReloaderProvider` currently segfaults on construction if grpc_init() is not called before construction. This is because when creating the `DirectoryReloaderCrlProvider` we [call GetDefaultEventEngine](a58f3f2df5/src/core/lib/security/credentials/tls/grpc_tls_crl_provider.cc (L152)), and getting the default event engine requires that `grpc_init` is called.
This PR adds a test that catches the segfault and adds `grpc_init` and `grpc_shutdown` to the ctor and dtor of `DirectoryReloaderCrlProvider` so that the test passes.
Closes#35247
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#35251
Craig Tiller
ericsalo
Yash Tibrewal
Yijie Ma
Mark D. Roth
Eugene Ostroukhov
Gregory Cooke
Esun Kim
Matthew Stevenson
Tanvi Jagtap
John Cormie
Luwei Ge