Why: Cleanup for chttp2_transport ahead of promise conversion - lots of
logic has become interleaved throughout chttp2, so some effort to
isolate logic out is warranted ahead of that conversion.
What: Split configuration and policy tracking for each of ping rate
throttling and abuse detection into their own modules. Add tests for
them.
Incidentally: Split channel args into their own header so that we can
split the policy stuff into separate build targets.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This reverts the following PRs: #32692#33087#33093#33427#33568
These changes seem to have introduced some flaky crashes. Reverting
while I investigate.
As per gRFC A58, when WRR sees a subchannel report READY, it reset the
non_empty_since value, thus restarting the blackout period. However,
there were two cases where we were incorrectly triggering this code:
1. When WRR got an updated address list that contained addresses that
were already present on the old list and whose subchannels were already
in READY state, the initial notification for those subchannels on the
new list was READY, which incorrectly triggered resetting the
non_empty_since value.
2. Due to a bug in the outlier_detection policy, whenever an update was
propagated down through the OD policy without actually enabling OD, it
would incorrectly send a duplicate connectivity state notification for
the subchannels. This meant that a subchannel that was already in state
READY would report READY again, which would also incorrectly trigger
resetting the non_empty_since value.
This PR makes two changes:
1. Fix the bug in outlier_detection that caused it to generate the
spurious duplicate READY updates.
2. Fix WRR to reset the non_empty_since value when a subchannel goes
READY only if the subchannel has seen a previous state update and only
if that previous state was not READY. (The duplicate READY notifications
should not actually happen anymore now that the OD policy has been
fixed, but better to be defensive.)
Fixes b/290983884.
More work on the dualstack backend design:
- Change round_robin to delegate to pick_first instead of creating
subchannels directly.
- Change pick_first such that when it is the child of a petiole policy,
it will unconditionally start a health watch.
- Change the client-side health checking code such that if client-side
health checking is not enabled, it will return the subchannel's raw
connectivity state.
- As part of this, we introduce a new endpoint_list library to be used
by petiole policies, which is intended to replace the existing
subchannel_list library. The only policy that will still directly
interact with subchannels is pick_first, so the relevant parts of the
subchannel_list functionality have been copied directly into that
policy. The subchannel_list library will be removed after all petiole
policies are updated to delegate to pick_first.
The address attribute interface was intended to provide a mechanism to
pass attributes separately from channel args, for values that do not
affect subchannel behavior and therefore do not need to be present in
the subchannel key, which does include channel args. However, the
mechanism as currently designed is fairly clunky and is probably not the
direction we will want to go in the long term.
Eventually, we will want some mechanism for registering channel args,
which would provide a cleaner way to indicate that a given channel arg
should not be used in the subchannel key, so that we don't need a
completely different mechanism. For now, this PR is just doing an
interim step, which is to establish a special channel arg key prefix to
indicate that an arg is not needed in the subchannel key.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Currently, we are not very consistent in what we assume the initial
state of an LB policy will be and whether or not we assume that it will
immediately report a new picker when it gets its initial address update;
different parts of our code make different assumptions. This PR
establishes the convention that LB policies will be assumed to start in
state CONNECTING and will *not* be assumed to report a new picker
immediately upon getting their initial address update, and we now assume
that convention everywhere consistently.
This is a preparatory step for changing policies like round_robin to
delegate to pick_first, which I'm working on in #32692. As part of that
change, we need pick_first to not report a connectivity state until it
actually sees the connectivity state of the underlying subchannels, so
that round_robin knows when to swap over to a new child list without
reintroducing the problem fixed in #31939.
This makes the JSON API visible as part of the C-core API, but in the
`experimental` namespace. It will be used as part of various
experimental APIs that we will be introducing in the near future, such
as the audit logging API.
This commit adds support for using CIDR blocks defined in the `no_proxy`
environment variable. For example:
```
http_proxy=http://localhost:8080 no_proxy=10.10.0.0/24
```
The example above would bypass the proxy if the server IP matched
10.10.0.0 - 10.10.0.255.
Closes#22681
---------
Co-authored-by: Yash Tibrewal <yashkt@google.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This reverts commit 7bd9267f32.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Alongside https://github.com/grpc/grpc/pull/32496, this makes this test
behave the same on all platforms.
FWIW, I verified this causes us to see the previous lock cycle problem
in https://github.com/grpc/grpc/pull/32491 on linux - originally that
lock cycle was only on mac, because of environmental differences between
mac and linux in CI.
* Revert "Revert "xds_override_host LB: add support for draining state (#31985)" (#32189)"
This reverts commit 5222eafdc1.
* fixup: Add missing dependency to grpc_xds_client targetZ
* WRR: port StaticStrideScheduler to OSS
* WIP
* Automated change: Fix sanity tests
* fix build
* remove unused aliases
* fix another type mismatch
* remove unnecessary include
* move benchmarks to their own file, and don't run it on windows
* Automated change: Fix sanity tests
* add OOB reporting
* generate_projects
* clang-format
* add config parser test
* clang-tidy and minimize lock contention
* add config defaults
* add oob_reporting_period config field and add basic test
* Automated change: Fix sanity tests
* fix test
* change test to use basic RR
* WIP: started exposing peer address to LB policy API
* first WRR test passing!
* small cleanup
* port RR fix to WRR
* test helper refactoring
* more test helper refactoring
* WIP: trying to fix test to have the right weights
* more WIP -- need to make pickers DualRefCounted
* fix timer ref handling and get tests working
* clang-format
* iwyu and generate_projects
* fix build
* add test for OOB reporting
* keep only READY subchannels in the picker
* add file missed in a previous commit
* fix sanity
* iwyu
* add weight expiration period
* add tests for weight update period and OOB reporting period
* Automated change: Fix sanity tests
* lower bound for timer interval
* consistently apply grpc_test_slowdown_factor()
* cache time in test
* add blackout_period tests
* avoid some unnecessary copies
* clang-format
* add field to config test
* simplify orca watcher tracking
* attempt to fix build
* iwyu
* generate_projects
* add "_experimental" suffix to policy name
* WRR: update tests to cover qps plumbing
* WIP
* more WIP
* basic WRR e2e test working
* add OOB test
* fix sanity
* ignore duplicate addresses
* Automated change: Fix sanity tests
* add new tracer to doc/environment_variables.md
* retain scheduler state across pickers
* Automated change: Fix sanity tests
* use separate mutexes for scheduler and timer
* sort addresses to avoid index churn
* remove fetch_sub for wrap around in RR case
Co-authored-by: markdroth <markdroth@users.noreply.github.com>
Craig Tiller
Mark D. Roth
Eugene Ostroukhov
Yousuk Seung
Stan Hu
Esun Kim
Jan Tattermusch
Yash Tibrewal
apolcyn
AJ Heller
Yijie Ma