The `TickForDuration()` method was using `grpc_core::Timestamp::Now()`
to get the current time, but that was not in sync with the `now_` value
inside the Fuzzing EE itself, with the result that after two subsequent
250ms increments, timers were not being properly fired. I've added a
test that demonstrates this failure without the fix.
Experiment 1: On RST_STREAM: reduce MAX_CONCURRENT_STREAMS for one round
trip.
Experiment 2: If a settings frame is outstanding with a lower
MAX_CONCURRENT_STREAMS than is configured, and we receive a new incoming
stream that would exceed the new cap, randomly reject it.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is the initial change of chaotic-good client transport read path,
which is a following PR of the client transport write path at #33876.
There's a pending work of handling endpoint failures in the transport.
It will be added after we have the inter-activity pipe with close
function.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
- Fixes support for the same address being present more than once in the
address list, which was accidentally broken in #34244.
- Change the call attribute to encode the hash as an integer instead of
a string.
Isolate ping callback tracking to its own file.
Also takes the opportunity to simplify keepalive code by applying the
ping timeout to all pings.
Adds an experiment to allow multiple pings outstanding too (this was
originally an accidental behavior change of the work, but one that I
think may be useful going forward).
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Pipe-like type (has a send end, a receive end, and a closing mechanism)
for cross-activity transfers.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Building out a new framing layer for chttp2.
The central idea here is to have the framing layer be solely responsible
for serialization of frames, and their deserialization - the framing
layer can reject frames that have invalid syntax - but the enacting of
what that frame means is left to a higher layer.
This class will become foundational for the promise conversion of chttp2
- by eliminating action from the parsing of frames we can reuse this
sensitive code.
Right now the new layer is inactive - there's a test that exercises it
relatively well, and not much more. In the next PRs I'll add an
experiments to enable using this layer or the existing code in the
writing and reading paths.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is the initial implementation of the chaotic-good client transport
write path. There will be a follow-up PR to fulfill the read path.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This PR adds in delegating call tracers that work like so -
If this is the first call tracer that is being added onto the call
context, just add it as earlier.
If this is the second call tracer that is being added onto the call
context, create a delegating call tracer that contains a list of call
tracers (including the first call tracer).
Any more call tracers added, just get added to the list of tracers in
the delegating call tracer.
(This is not yet used other than through tests.)
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Why: Cleanup for chttp2_transport ahead of promise conversion - lots of
logic has become interleaved throughout chttp2, so some effort to
isolate logic out is warranted ahead of that conversion.
What: Split configuration and policy tracking for each of ping rate
throttling and abuse detection into their own modules. Add tests for
them.
Incidentally: Split channel args into their own header so that we can
split the policy stuff into separate build targets.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
tcp_posix_test is incorrectly assuming that all endpoint_writes with
timestamps enabled will be successfully traced. Remove the timestamps
checking related tests to prevent flakes when the test is enabled
internally.
Along with an experiment this time
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Adds a test for the experiments codegen. It updates the codegen to parse
test_experiments.yaml and test_experiments_rollouts.yaml files and
generate test_experiments.h and test_experiments.cc files along with an
experiments_test.cc file. The experiments test verifies the returned
value of IsExperimentEnabled with the expected value.
This reverts commit e107ff5e99.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Noticed some inconsistencies in our keepalive configuration -
* Earlier, even if keepalive pings were disabled, we would be scheduling
keepalive pings at an interval of INT_MAX ms.
* We were not using `g_default_client_keepalive_permit_without_calls` /
`g_default_server_keepalive_permit_without_calls`. They are both false
by default but they can be overridden in
`grpc_chttp2_config_default_keepalive_args`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
I've got a hypothesis that we're losing isolation between test shards
right now for "some reason".
This is a change to reflect test sharding in the port distribution that
we use, in an attempt to alleviate that.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The following bugs are fixed:
* Missing ExecCtx in event engine endpoints and listeners
* Ref counting issue with iomgr endpoint which causes crashes in
overloaded situations
The PR includes a test which triggers these bugs by simulating an
overloaded system.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
The approach of doing a recursive function call to expand the if checks
for known metadata names was tripping up an optimization clang has to
collapse that if/then tree into an optimized tree search over the set of
known strings. By unrolling that loop (with a code generator) we start
to present a pattern that clang *can* recognize, and hopefully get some
more stable and faster code generation as a benefit.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
- switch to json_object_loader for config parsing
- use `absl::string_view` instead of `const char*` for cert provider
names
- change cert provider registry to use a map instead of a vector
- remove unused mesh_ca cert provider factory
Allow for multiple `--grpc_experiments`, `--grpc_trace` command line
arguments to be added, accumulate them, and provide them to gRPC as one
thing.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Add a new binary that runs all core end2end tests in fuzzing mode.
In this mode FuzzingEventEngine is substituted for the default event
engine. This means that time is simulated, as is IO. The FEE gets
control of callback delays also.
In our tests the `Step()` function becomes, instead of a single call to
`completion_queue_next`, a series of calls to that function and
`FuzzingEventEngine::Tick`, driving forward the event loop until
progress can be made.
PR guide:
---
**New binaries**
`core_end2end_test_fuzzer` - the new fuzzer itself
`seed_end2end_corpus` - a tool that produces an interesting seed corpus
**Config changes for safe fuzzing**
The implementation tries to use the config fuzzing work we've previously
deployed in api_fuzzer to fuzz across experiments. Since some
experiments are far too experimental to be safe in such fuzzing (and
this will always be the case):
- a new flag is added to experiments to opt-out of this fuzzing
- a new hook is added to the config system to allow variables to
re-write their inputs before setting them during the fuzz
**Event manager/IO changes**
Changes are made to the event engine shims so that tcp_server_posix can
run with a non-FD carrying EventEngine. These are in my mind a bit
clunky, but they work and they're in code that we expect to delete in
the medium term, so I think overall the approach is good.
**Changes to time**
A small tweak is made to fix a bug initializing time for fuzzers in
time.cc - we were previously failing to initialize
`g_process_epoch_cycles`
**Changes to `Crash`**
A version that prints to stdio is added so that we can reliably print a
crash from the fuzzer.
**Changes to CqVerifier**
Hooks are added to allow the top level loop to hook the verification
functions with a function that steps time between CQ polls.
**Changes to end2end fixtures**
State machinery moves from the fixture to the test infra, to keep the
customizations for fuzzing or not in one place. This means that fixtures
are now just client/server factories, which is overall nice.
It did necessitate moving some bespoke machinery into
h2_ssl_cert_test.cc - this file is beginning to be problematic in
borrowing parts but not all of the e2e test machinery. Some future PR
needs to solve this.
A cq arg is added to the Make functions since the cq is now owned by the
test and not the fixture.
**Changes to test registration**
`TEST_P` is replaced by `CORE_END2END_TEST` and our own test registry is
used as a first depot for test information.
The gtest version of these tests: queries that registry to manually
register tests with gtest. This ultimately changes the name of our tests
again (I think for the last time) - the new names are shorter and more
readable, so I don't count this as a regression.
The fuzzer version of these tests: constructs a database of fuzzable
tests that it can consult to look up a particular suite/test/config
combination specified by the fuzzer to fuzz against. This gives us a
single fuzzer that can test all 3k-ish fuzzing ready tests and cross
polinate configuration between them.
**Changes to test config**
The zero size registry stuff was causing some problems with the event
engine feature macros, so instead I've removed those and used GTEST_SKIP
in the problematic tests. I think that's the approach we move towards in
the future.
**Which tests are included**
Configs that are compatible - those that do not do fd manipulation
directly (these are incompatible with FuzzingEventEngine), and those
that do not join threads on their shutdown path (as these are
incompatible with our cq wait methodology). Each we can talk about in
the future - fd manipulation would be a significant expansion of
FuzzingEventEngine, and is probably not worth it, however many uses of
background threads now should probably evolve to be EventEngine::Run
calls in the future, and then would be trivially enabled in the fuzzers.
Some tests currently fail in the fuzzing environment, a
`SKIP_IF_FUZZING` macro is used for these few to disable them if in the
fuzzing environment. We'll burn these down in the future.
**Changes to fuzzing_event_engine**
Changes are made to time: an exponential sweep forward is used now -
this catches small time precision things early, but makes decade long
timers (we have them) able to be used right now. In the future we'll
just skip time forward to the next scheduled timer, but that approach
doesn't yet work due to legacy timer system interactions.
Changes to port assignment: we ensure that ports are legal numbers
before assigning them via `grpc_pick_port_or_die`.
A race condition between time checking and io is fixed.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This PR implements a work-stealing thread pool for use inside
EventEngine implementations. Because of historical risks here, I've
guarded the new implementation behind an experiment flag:
`GRPC_EXPERIMENTS=work_stealing`. Current default behavior is the
original thread pool implementation.
Benchmarks look very promising:
```
bazel test \
--test_timeout=300 \
--config=opt -c opt \
--test_output=streamed \
--test_arg='--benchmark_format=csv' \
--test_arg='--benchmark_min_time=0.15' \
--test_arg='--benchmark_filter=_FanOut' \
--test_arg='--benchmark_repetitions=15' \
--test_arg='--benchmark_report_aggregates_only=true' \
test/cpp/microbenchmarks:bm_thread_pool
```
2023-05-04: `bm_thread_pool` benchmark results on my local machine (64
core ThreadRipper PRO 3995WX, 256GB memory), comparing this PR to
master:
2023-05-04: `bm_thread_pool` benchmark results in the Linux RBE
environment (unsure of machine configuration, likely small), comparing
this PR to master.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
Reverts grpc/grpc#32924. This breaks the build again, unfortunately.
From `test/core/event_engine/cf:cf_engine_test`:
```
error: module .../grpc/test/core/event_engine/cf:cf_engine_test does not depend on a module exporting 'grpc/support/port_platform.h'
```
@sampajano I recommend looking into CI tests to catch iOS problems
before merging. We can enable EventEngine experiments in the CI
generally once this PR lands, but this broken test is not one of those
experiments. A normal build should have caught this.
cc @HannahShiSFB
Craig Tiller
Mark D. Roth
nanahpang
Gregory Cooke
Eugene Ostroukhov
Yash Tibrewal
Vignesh Babu
Hannah Shi
AJ Heller
