This enables the EventEngine experiments in end2end tests, excluding the
ResourceQuota tests which have known failures.
Some Windows tests are hanging, so they will be enabled later.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
If an engine is created, it should be fully functional regardless of
whether gRPC-core experiments are on or off. The trade-off for now is
that when the core experiments are not enabled, the engine will be
slowly polling with nothing to do.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
Expand server promises to run with C++ end2end tests.
Across connected_channel/call/batch_builder/pipe/transport:
- fix a bug where read errors weren't propagated from transport to call
so that we can populate failed_before_recv_message for the c++ bindings
- ensure those errors are not, however, used to populate the returned
call status
Add a new latch call arg to lazily propagate the bound CQ for a server
call (and client call, but here it's used degenerately - it's always
populated). This allows server calls to be properly bound to
pollsets.(1)/(2)
In call.cc:
- move some profiling code from FilterStackCall to Call, and then use it
in PromiseBasedCall (this should be cleaned up with tracing work)
- implement GetServerAuthority
In server.cc:
- use an RAII pattern on `MatchResult` to avoid a bug whereby a tag
could be dropped if we cancel a request after it's been matched but
before it's published
- fix deadline export to ServerContext
In resource_quota_server.cc:
- fix some long standing flakes (that were finally obvious with the new
test code) - it's legal here to have client calls not arrive at the
server due to resource starvation, work through that (includes adding
expectations during a `Step` call, which required some small tweaks to
cq_verifier)
In the C++ end2end_test.cc:
- strengthen a flaky test so it passes consistently (it's likely we'll
revisit this with the fuzzing efforts to strengthen it into an actually
robust test)
(1) It's time to remove this concept
(2) Surprisingly the only test that *reliably* demonstrates this not
being done is time_change_test
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This error can trigger for either initial or trailing metadata (and
we've had outages where the latter was the cause).
I don't think we know at this layer if we're parsing initial or trailing
- though it'd be a good exercise to plumb that through.
For now remove the word initial because it's better to give less
information than wrong information.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This reverts commit 4b46dbc19e.
Reason: this seems to be breaking load reports in certain cases,
b/276944116
Let's revert so this doesn't accidentally get released.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Notes:
- `+trace` fixtures haven't run since 2016, so they're disabled for now
(7ad2d0b463 (diff-780fce7267c34170c1d0ea15cc9f65a7f4b79fefe955d185c44e8b3251cf9e38R76))
- all current fixtures define `FEATURE_MASK_SUPPORTS_AUTHORITY_HEADER`
and hence `authority_not_supported` has not been run in years - deleted
- bad_hostname similarly hasn't been triggered in a long while, so
deleted
- load_reporting_hook has never been enabled, so deleted
(f23fb4cf31/test/core/end2end/generate_tests.bzl (L145-L148))
- filter_latency & filter_status_code rely on global variables and so
don't convert particularly cleanly - and their value seems marginal, so
deleted
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This commit adds support for using CIDR blocks defined in the `no_proxy`
environment variable. For example:
```
http_proxy=http://localhost:8080 no_proxy=10.10.0.0/24
```
The example above would bypass the proxy if the server IP matched
10.10.0.0 - 10.10.0.255.
Closes#22681
---------
Co-authored-by: Yash Tibrewal <yashkt@google.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Built atop #31448
Offers a simple framework for testing filters.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Add the capability for api-fuzzer to fuzz over different config
variables, to enable us to spot incompatible configurations there
sooner.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The logic is straightforward: attempt to read the
`GRPC_ALTS_MAX_CONCURRENT_HANDSHAKES` environment variable and, if it
set to an integer, instantiate the handshake queues based on this
integer.
Based on go/grpc-alts-concurrent-handshake-cap.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Implement listeners, connection, endpoints for `FuzzingEventEngine`.
Allows the fuzzer to select write sizes and delays, connection delays,
and port assignments.
I made a few modifications to the test suite to admit this event engine
to pass the client & server tests:
1. the test factories return shared_ptr<> to admit us to return the same
event engine for both the oracle and the implementation - necessary
because FuzzingEventEngine forms a closed world of addresses & ports.
2. removed the WaitForSingleOwner calls - these seem unnecessary, and we
don't ask our users to do this - tested existing linux tests 1000x
across debug, asan, tsan with this change
Additionally, the event engine overrides the global port picker logic so
that port assignments are made by the fuzzer too.
This PR is a step along a longer journey, and has some outstanding
brethren PR's, and some follow-up work:
* #32603 will convert all the core e2e tests into a more malleable form
* we'll then use #32667 to turn all of these into fuzzers
* finally we'll integrate this into that work and turn all core e2e
tests into fuzzers over timer & callback reorderings and io
size/spacings
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This reverts commit 7bd9267f32.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
(hopefully last try)
Add new channel arg GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE as hard limit
for metadata. Change GRPC_ARG_MAX_METADATA_SIZE to be a soft limit.
Behavior is as follows:
Hard limit
(1) if hard limit is explicitly set, this will be used.
(2) if hard limit is not explicitly set, maximum of default and soft
limit * 1.25 (if soft limit is set) will be used.
Soft limit
(1) if soft limit is explicitly set, this will be used.
(2) if soft limit is not explicitly set, maximum of default and hard
limit * 0.8 (if hard limit is set) will be used.
Requests between soft and hard limit will be rejected randomly, requests
above hard limit will be rejected.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Previously we triggered a flow control update when `announced <
target/2`, but if `target==1` then we fail to send a flow control update
(announced is never less than 1/2==0) and break our forward progress
guarantees.
b/259780449 internally.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Earlier, we were simply using a 64 bit random number, but the spec
actually calls for UUIDv4.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This allows us to replace `absl::optional<TaskHandle>` with checks
against the invalid handle.
This PR also replaces the differently-named invalid handle instances
with a uniform way of accessing static invalid instances across all
handle types, which aids a bit in testing.
Add an event manager that spawns threads just as much as it possibly
can... to expose TSAN to the myriad thread ordering problems in our code
base.
Next steps for this will be to add a new test mode for tsan + thready
event engine + a few other doodads to increase threads in the system
(party.cc in particular has a good place for a hook).
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This PR is a small code change with a lot of new test data.
[In OpenSSL, there are two flags that configure CRL checks. Coping
relevant
section:](https://www.openssl.org/docs/man1.0.2/man3/X509_VERIFY_PARAM_get_depth.html)
> - X509_V_FLAG_CRL_CHECK enables CRL checking for the certificate chain
leaf certificate. An error occurs if a suitable CRL cannot be found.
> - X509_V_FLAG_CRL_CHECK_ALL enables CRL checking for the entire
certificate chain.
We currently only set `X509_V_FLAG_CRL_CHECK`, so we will only ever
check if the leaf certificate is revoked. We should check the whole
chain. I am open to making this a user configuration if we want to do it
that way, but we certainly need to be able to check the whole chain.
So, this PR contains the small code change in
`ssl_transport_security.cc` to use the `X509_V_FLAG_CRL_CHECK_ALL` flag.
Then the rest of the changes are in tests. I've added all the necessary
files to have a chain built that looks as follows
`Root CA -> Revoked Intermediate CA -> Leaf Certificate`, and added a
test for this case as well.
You can verify that on master this new test will fail (i.e. the
handshake will succeed even though the intermediate CA is revoked) by
checking out this branch, running `git checkout master --
./src/core/tsi/ssl_transport_security.cc`, then running the test.
I also slightly reorganized test/core/tsi/test_creds/ so that the CRLs
are in their own directory, which is the way our API intends to accept
CRLs.
Fixing TSAN data races of the kind -
https://source.cloud.google.com/results/invocations/c3f02253-0d0b-44e6-917d-07e4bc0d3d62/targets/%2F%2Ftest%2Fcpp%2Fperformance:writes_per_rpc_test@poller%3Dpoll/log
I think the original issue was the non-atomic load in
writes_per_rpc_test.cc but also making the change to use barriers
instead of relaxed atomics (probably unimportant but I'll prefer safety
in the absence of otherwise comments).
Could probably also use std::atomic but feeling a bit lazy to make the
changes throughout.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
Looking for something else I made some test additions, code tweaks to
make `Poll<>` better.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This change mostly aims to get OpenCensus to use the new
ServerCallTracer interface. Note that the interfaces nor the code are in
their final states. There are a bunch of moving pieces, but I thought
this might be a nice mid-step to check-in and make sure that our
internal traces can also work with these changes.
Overall changes -
1) call_tracer.h shows what the hierarchy of new call tracer interfaces
looks like. Open to renaming suggestions.
2) Moved most of the common interface between `CallAttemptTracer` and
`ServerCallTracer` into a common `CallTracerInterface`. We should be
able to eventually move `RecordReceivedTrailingMetadata` and `RecordEnd`
as well to these common interfaces, but it requires some additional
work.
3) The compression filter is now responsible for recording the recv and
send messages for both the subchannel call and the server, and adds in
ability to record compressed and decompressed messages as well.
4) The OpenCensus server filter now uses the new `ServerCallTracer`
interface, and so doesn't need to be a filter anymore.
5) A new ServerCallTracerFilter was added. Ideally, we should be able to
move it to the current connected filter, but it is in a bit of an
interesting state right now, so I would prefer making those changes in a
separate PR with Craig's eyes on it.
6) A new context element `GRPC_CONTEXT_CALL_TRACER_ANNOTATION_INTERFACE`
was created that replaces the old `GRPC_CONTEXT_CALL_TRACER`, and the
new `GRPC_CONTEXT_CALL_TRACER` is mainly to pass the `CallAttemptTracer`
down the stack. This should go away in the new promise-based world.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
<!-- Reviewable:start -->
- - -
This change is [<img src="https://reviewable.io/review_button.svg"
height="34" align="absmiddle"
alt="Reviewable"/>](https://reviewable.io/reviews/grpc/grpc/32618)
<!-- Reviewable:end -->
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
This check only works if all handshake RPCs have an OK status, and it's
racey e.g. if the client is cancelling handshake RPCs (being when an RPC
is cancelled, termination of the RPC at the client is asynchronous from
termination at the server, so the client can resume the queue before the
server RPC completes).
With iomgr, this test is effectively rate limited by ExecCtx and the
single thread running pollset_work, which results in thousands of tiny
writes happening before every read. A small set of _synchronous_ 8k
reads then dominate the read-side of the test. This is an efficient
balance.
With the Windows EventEngine, the fully asynchronous, multi-threaded
reads and writes end up alternating roughly 1:1, meaning that a read
callback is executed for every tiny handful of bytes, tens of thousands
of times. Compared to the Posix EventEngine, without things like TCP_INQ
and/or recvmsg's timeout, I don't know of any great signal for how much
data can safely be received in a batch (e.g., we don't want to wait for
data that will never come, and we don't want to run callbacks for 2
bytes over and over again if we have KB in the pipe).
I believe the Windows EventEngine is WAI. I can significantly improve
this test performance by artificially slowing the reader down (adding a
>= 1ms sleep), but I believe that improves this use case to the
detriment of all others.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
AJ Heller
Mark D. Roth
Craig Tiller
apolcyn
Alisha Nanda
Stan Hu
Matthew Stevenson
Yousuk Seung
Esun Kim
Jin
Yash Tibrewal
Gregory Cooke
Carl Lundin
Jan Tattermusch
