As per https://github.com/grpc/proposal/pull/419, the experimental optional label `grpc.lb.locality` is added to the follow per-call metrics -
* grpc.client.attempt.duration
* grpc.client.attempt.sent_total_compressed_message_size
* grpc.client.attempt.rcvd_total_compressed_message_size
Closes#36254
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/36254 from yashykt:OTelOptionalLabelsOnPerCall c5390c99a1
PiperOrigin-RevId: 622973959
This new directory combines code from the following locations:
- src/core/ext/filters/client_channel/resolver
- src/core/lib/resolver
Closes#35804
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35804 from markdroth:client_channel_resolver_reorg2 30660e6b00
PiperOrigin-RevId: 604665835
This new directory combines code from the following locations:
- src/core/ext/filters/client_channel/lb_policy
- src/core/lib/load_balancing
Closes#35786
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35786 from markdroth:client_channel_resolver_reorg 98554efb98
PiperOrigin-RevId: 604351832
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#35210
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35210 from yijiem:csm-service-label 6a6a7d1774
PiperOrigin-RevId: 597641393
Previously, `RefCountedPtr<>` and `WeakRefCountedPtr<>` incorrectly allowed
implicit casting of any type to any other type. This hadn't caused a
problem until recently, but now that it has, we need to fix it. I have
fixed this by changing these smart pointer types to allow type
conversions only when the type used is convertible to the type of the
smart pointer. This means that if `Subclass` inherits from `Base`, then
we can set a `RefCountedPtr<BaseClass>` to a value of type
`RefCountedPtr<Subclass>`, but we cannot do the reverse.
We had been (ab)using this bug to make it more convenient to deal with
down-casting in subclasses of ref-counted types. For example, because
`Resolver` inherits from `InternallyRefCounted<Resolver>`, calling
`Ref()` on a subclass of `Resolver` will return `RefCountedPtr<Resolver>`
rather than returning the subclass's type. The ability to implicitly
convert to the subclass type made this a bit easier to deal with. Now
that that ability is gone, we need a different way of dealing with that
problem.
I considered several ways of dealing with this, but none of them are
quite as ergonomic as I would ideally like. For now, I've settled on
requiring callers to explicitly down-cast as needed, although I have
provided some utility functions to make this slightly easier:
- `RefCounted<>`, `InternallyRefCounted<>`, and `DualRefCounted<>` all
provide a templated `RefAsSubclass<>()` method that will return a new
ref as a subclass. The type used with `RefAsSubclass()` must be a
subclass of the type passed to `RefCounted<>`, `InternallyRefCounted<>`,
or `DualRefCounted<>`.
- In addition, `DualRefCounted<>` provides a templated `WeakRefAsSubclass<T>()`
method. This is the same as `RefAsSubclass()`, except that it returns
a weak ref instead of a strong ref.
- In `RefCountedPtr<>`, I have added a new `Ref()` method that takes
debug tracing parameters. This can be used instead of calling `Ref()`
on the underlying object in cases where the caller already has a
`RefCountedPtr<>` and is calling `Ref()` only to specify the debug
tracing parameters. Using this method on `RefCountedPtr<>` is more
ergonomic, because the smart pointer is already using the right
subclass, so no down-casting is needed.
- In `WeakRefCountedPtr<>`, I have added a new `WeakRef()` method that
takes debug tracing parameters. This is the same as the new `Ref()`
method on `RefCountedPtr<>`.
- In both `RefCountedPtr<>` and `WeakRefCountedPtr<>`, I have added a
templated `TakeAsSubclass<>()` method that takes the ref out of the
smart pointer and returns a new smart pointer of the down-casted type.
Just as with the `RefAsSubclass()` method above, the type used with
`TakeAsSubclass()` must be a subclass of the type passed to
`RefCountedPtr<>` or `WeakRefCountedPtr<>`.
Note that I have *not* provided an `AsSubclass<>()` variant of the
`RefIfNonZero()` methods. Those methods are used relatively rarely, so
it's not as important for them to be quite so ergonomic. Callers of
these methods that need to down-cast can use
`RefIfNonZero().TakeAsSubclass<>()`.
PiperOrigin-RevId: 592327447
Will be used during this transition time to run 5-pipe style filters somewhat more natively. Once everything is getting closer to 5-pipes, we'll drop this method and have the channel stack understand how to create an interception-map that can be reused per-call, instead of creating the interception-map every time a call is created.
Closes#35200
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35200 from ctiller:cg-channel-filter-api 2fc11dd273
PiperOrigin-RevId: 587940947
The old name has been deprecated for a while so this should be safe. Also update variable names accordingly.
<!--
If you know who should review your pull request, please assign it to that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the appropriate
lang label.
-->
Closes#35208
COPYBARA_INTEGRATE_REVIEW=https://github.com/grpc/grpc/pull/35208 from ericsalo:master 80beea4920
PiperOrigin-RevId: 587845096
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
Ditch the old priority scheme for ordering filters, instead explicitly
mark up before/after constraints.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
More changes as part of the dualstack design:
- Change resolver and LB policy APIs to support multiple addresses per
endpoint. Specifically, replace `ServerAddress` with
`EndpointAddresses`, which encodes more than one address. Per-address
channel args are retained at the same level, so they are now
per-endpoint. For now, `EndpointAddress` provides a single-address ctor
and a single-address accessor for backward compatibility, so
`ServerAdress` is an alias for `EndpointAddresses`; eventually, this
alias and the single-address methods will be removed.
- Add an `EndpointAddressSet` class, which represents an unordered set
of addresses to be used as a map key. This will be used in a number of
LB policies that need to store per-endpoint state.
- Change the LB policy API's `ChannelControlHelper::CreateSubchannel()`
method to take the address and per-endpoint channel args as separate
parameters, so that we don't need to construct a legacy `ServerAddress`
object as we create a new subchannel for each address in the endpoint.
- Change pick_first to flatten the address list.
- Change ring_hash to use `EndpointAddressSet` as the key for its
endpoint map, and to use the first address of the endpoint as the hash
key.
- Change WRR to use `EndpointAddressSet` as the key for its endpoint
weight map.
Note that support for multiple addresses per endpoint is guarded in RR
by the existing `round_robin_delegate_to_pick_fist` experiment and in
WRR by the existing `wrr_delegate_to_pick_first` experiment.
This PR does *not* include support for multiple addresses per endpoint
for the outlier_detection or xds_override_host LB policies; those will
come in subsequent PRs.
This should address one of the failures we're seeing in #34224.
The test failure is caused by the changes in timing triggering a race
condition. In the code at head, we delay sending out the subscription
for the first CDS watch until we've already seen the other two CDS
watches, because the previous send_message op has not yet completed, and
by the time it does, we've seen all 3 watches, so we can send a
subscription for all 3 at the same time. With the WorkSerializer change,
the send_message op is complete by the time we see the first CDS watch,
so we subscribe to only that resource, and then later add the other two.
The result is that we'll NACK twice with two different messages, the
first one including only the error about the first resource, and the
second one including all three.
I suspect this same race condition would have been triggered eventually
by the EventEngine migration anyway; the current test basically depends
on the single-thread timing of the iomgr approach. So I'm addressing it
by replacing the e2e test with a unit test that covers the same cases
without the timing issue.
De-experiment pick first since we have both affinity and randomness E2E
test running successfully.
---------
Co-authored-by: Yash Tibrewal <yashkt@google.com>
We decided to not populate `policy_name` with the HTTP filter name in
xDS case. So removing it from `GenerateServiceConfig`. This will be
consistent across languages. The gRFC
[PR](https://github.com/grpc/proposal/pull/346) has been updated.
The address attribute interface was intended to provide a mechanism to
pass attributes separately from channel args, for values that do not
affect subchannel behavior and therefore do not need to be present in
the subchannel key, which does include channel args. However, the
mechanism as currently designed is fairly clunky and is probably not the
direction we will want to go in the long term.
Eventually, we will want some mechanism for registering channel args,
which would provide a cleaner way to indicate that a given channel arg
should not be used in the subchannel key, so that we don't need a
completely different mechanism. For now, this PR is just doing an
interim step, which is to establish a special channel arg key prefix to
indicate that an arg is not needed in the subchannel key.
Fix#33308
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
- switch to json_object_loader for config parsing
- use `absl::string_view` instead of `const char*` for cert provider
names
- change cert provider registry to use a map instead of a vector
- remove unused mesh_ca cert provider factory
Mark D. Roth
Eugene Ostroukhov
Craig Tiller
Yash Tibrewal
Yousuk Seung
ericsalo
Yijie Ma
Esun Kim
Mohan Li
Luwei Ge
apolcyn