This reverts the following PRs: #32692#33087#33093#33427#33568
These changes seem to have introduced some flaky crashes. Reverting
while I investigate.
In preparation for implementing the promise based version, separate out
the legacy call data from the filter.
There are two commits here, each representing one phase of this code
movement:
66676d398c moves `class RetryFilter` into
the header and the vtable name into that class, as this will be shared
code between the implementations
4c84f115ad then moves `class
RetryFilter::CallData` into `class RetryFilterLegacyCallData`, and moves
*that* into its own file
Doing so makes me less confused as to what I'm editing going forward.
No functionality should be affected.
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This adds a new channel argument `GRPC_ARG_DSCP` which allows users to
create classified gRPC streams with a
Differentiated Services Code Point (DSCP) marking on the IP frames.
The channel argument is handled on both clients and servers, but
currently only on posix based systems.
Fixes#17225
**Background**:
In addition to what is already described is #17225, when gRPC is used in
telco systems there is often a need to classify streams of importance.
There can be multiple hops between two endpoints (e.g. between 2 telecom
operators) and some streams that are more important than others (e.g.
emergency call related or similar). By marking the IP packets using DSCP
the aware routers can make a sound decision of the prioritization.
This PR propose to use DSCP as the configuration value since its common
for both IPv4/IPv6, an alternative would be to use a config name that
includes TOS and Traffic Class.
There might be more needed regarding documentation and end2end testing,
but there I need some advice.
**References**
https://datatracker.ietf.org/doc/html/rfc2474https://www.iana.org/assignments/dscp-registry/dscp-registry.xhtml
<!--
Your pull request will be routed to the following person by default for
triaging.
If you know who should review your pull request, please remove the
mentioning below.
-->
@yashykt
More work on the dualstack backend design:
- Change ring_hash policy to delegate to pick_first instead of creating
subchannels directly.
- Note that, as mentioned in the WIP gRFC, because we lazily create the
pick_first child policies, so there's no need to swap over to a new list
as an atomic whole. As a result, we don't use the endpoint_list library
in this policy; instead, we just update a map in-place.
- Remove now-unused subchannel_list library.
More work on the dualstack backend design:
- Change round_robin to delegate to pick_first instead of creating
subchannels directly.
- Change pick_first such that when it is the child of a petiole policy,
it will unconditionally start a health watch.
- Change the client-side health checking code such that if client-side
health checking is not enabled, it will return the subchannel's raw
connectivity state.
- As part of this, we introduce a new endpoint_list library to be used
by petiole policies, which is intended to replace the existing
subchannel_list library. The only policy that will still directly
interact with subchannels is pick_first, so the relevant parts of the
subchannel_list functionality have been copied directly into that
policy. The subchannel_list library will be removed after all petiole
policies are updated to delegate to pick_first.
The address attribute interface was intended to provide a mechanism to
pass attributes separately from channel args, for values that do not
affect subchannel behavior and therefore do not need to be present in
the subchannel key, which does include channel args. However, the
mechanism as currently designed is fairly clunky and is probably not the
direction we will want to go in the long term.
Eventually, we will want some mechanism for registering channel args,
which would provide a cleaner way to indicate that a given channel arg
should not be used in the subchannel key, so that we don't need a
completely different mechanism. For now, this PR is just doing an
interim step, which is to establish a special channel arg key prefix to
indicate that an arg is not needed in the subchannel key.
Revert "Revert "[core] Add support for vsock transport"
(https://github.com/grpc/grpc/pull/33276)"
This reverts commit
c5ade3011a.
And fix the issue which broke the python build.
@markdroth@drfloob please review this PR. Thank you very much.
---------
Co-authored-by: AJ Heller <hork@google.com>
The approach of doing a recursive function call to expand the if checks
for known metadata names was tripping up an optimization clang has to
collapse that if/then tree into an optimized tree search over the set of
known strings. By unrolling that loop (with a code generator) we start
to present a pattern that clang *can* recognize, and hopefully get some
more stable and faster code generation as a benefit.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is another attempt to add support for vsock in grpc since previous
PRs(#24551, #21745) all closed without merging.
The VSOCK address family facilitates communication between
virtual machines and the host they are running on.
This patch will introduce new scheme: [vsock:cid:port] to
support VSOCK address family.
Fixes#32738.
---------
Signed-off-by: Yadong Qi <yadong.qi@intel.com>
Co-authored-by: AJ Heller <hork@google.com>
Co-authored-by: YadongQi <YadongQi@users.noreply.github.com>
Most of these data structures need to scale a bit like per-cpu, but not
entirely. We can have more than one cpu hit the same instance in most
cases, and probably want to cap out before the hundreds of shards some
platforms have.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This test mode tries to create threads wherever it legally can to
maximize the chances of TSAN finding errors in our codebase.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
The logger uses `absl::FPrintF` to write to stdout. After reading a
number of sources online, I got the impression that `std::fwrite` which
is used by `absl::FPrintF` is atomic so there is no locking required
here.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
This makes the JSON API visible as part of the C-core API, but in the
`experimental` namespace. It will be used as part of various
experimental APIs that we will be introducing in the near future, such
as the audit logging API.
This PR implements a work-stealing thread pool for use inside
EventEngine implementations. Because of historical risks here, I've
guarded the new implementation behind an experiment flag:
`GRPC_EXPERIMENTS=work_stealing`. Current default behavior is the
original thread pool implementation.
Benchmarks look very promising:
```
bazel test \
--test_timeout=300 \
--config=opt -c opt \
--test_output=streamed \
--test_arg='--benchmark_format=csv' \
--test_arg='--benchmark_min_time=0.15' \
--test_arg='--benchmark_filter=_FanOut' \
--test_arg='--benchmark_repetitions=15' \
--test_arg='--benchmark_report_aggregates_only=true' \
test/cpp/microbenchmarks:bm_thread_pool
```
2023-05-04: `bm_thread_pool` benchmark results on my local machine (64
core ThreadRipper PRO 3995WX, 256GB memory), comparing this PR to
master:
2023-05-04: `bm_thread_pool` benchmark results in the Linux RBE
environment (unsure of machine configuration, likely small), comparing
this PR to master.
---------
Co-authored-by: drfloob <drfloob@users.noreply.github.com>
Reverts grpc/grpc#32924. This breaks the build again, unfortunately.
From `test/core/event_engine/cf:cf_engine_test`:
```
error: module .../grpc/test/core/event_engine/cf:cf_engine_test does not depend on a module exporting 'grpc/support/port_platform.h'
```
@sampajano I recommend looking into CI tests to catch iOS problems
before merging. We can enable EventEngine experiments in the CI
generally once this PR lands, but this broken test is not one of those
experiments. A normal build should have caught this.
cc @HannahShiSFB
Makes some awkward fixes to compression filter, call, connected channel
to hold the semantics we have upheld now in tests.
Once the fixes described here
https://github.com/grpc/grpc/blob/master/src/core/lib/channel/connected_channel.cc#L636
are in this gets a lot less ad-hoc, but that's likely going to be
post-landing promises client & server side.
We specifically need special handling for server side cancellation in
response to reads wrt the inproc transport - which doesn't track
cancellation thoroughly enough itself.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
1. `GrpcAuthorizationEngine` creates the logger from the given config in
its ctor.
2. `Evaluate()` invokes audit logging when needed.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Audit logging APIs for both built-in loggers and third-party logger
implementations.
C++ uses using decls referring to C-Core APIs.
---------
Co-authored-by: rockspore <rockspore@users.noreply.github.com>
Third-party loggers will be added in subsequent PRs once the logger
factory APIs are available to validate the configs here.
This registry is used in `xds_http_rbac_filter.cc` to generate service
config json.
This paves the way for making pick_first the universal leaf policy (see
#32692), which will be needed for the dualstack design. That change will
require changing pick_first to see both the raw connectivity state and
the health-checking connectivity state of a subchannel, so that we can
enable health checking when pick_first is used underneath round_robin
without actually changing the pick_first connectivity logic (currently,
pick_first always disables health checking). To make it possible to do
that, this PR moves the health checking code out of the subchannel and
into a separate API using the same data-watcher mechanism that was added
for ORCA OOB calls.
The PR also creates a separate BUILD target for:
- chttp2 context list
- iomgr buffer_list
- iomgr internal errqueue
This would allow the context list to be included as standalone
dependencies for EventEngine implementations.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
@sampajano
When using this internally, we noticed that it's impossible to use
custom_metadata.h without creating a dependency cycle between
:custom_metadata and :grpc_base.
A full build refactoring is too large right now, so merge that header
into :grpc_base for the time being.
Also, separate `SimpleSliceBasedMetadata` into its own file, so that it
can be reused in custom_metadata.h.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This PR also centralizes the client channel resolver selection. Resolver
selection is still done using the plugin system, but when the Ares and
native client channel resolvers go away, we can consider bootstrapping
this differently.
Aim here is to allow adding custom metadata types to the internal build.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
(hopefully last try)
Add new channel arg GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE as hard limit
for metadata. Change GRPC_ARG_MAX_METADATA_SIZE to be a soft limit.
Behavior is as follows:
Hard limit
(1) if hard limit is explicitly set, this will be used.
(2) if hard limit is not explicitly set, maximum of default and soft
limit * 1.25 (if soft limit is set) will be used.
Soft limit
(1) if soft limit is explicitly set, this will be used.
(2) if soft limit is not explicitly set, maximum of default and hard
limit * 0.8 (if hard limit is set) will be used.
Requests between soft and hard limit will be rejected randomly, requests
above hard limit will be rejected.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
This is a big rewrite of global config.
It does a few things, all somewhat intertwined:
1. centralize the list of configuration we have to a yaml file that can
be parsed, and code generated from it
2. add an initialization and a reset stage so that config vars can be
centrally accessed very quickly without the need for caching them
3. makes the syntax more C++ like (less macros!)
4. (optionally) adds absl flags to the OSS build
This first round of changes is intended to keep the system where it is
without major changes. We pick up absl flags to match internal code and
remove one point of deviation - but importantly continue to read from
the environment variables. In doing so we don't force absl flags on our
customers - it's possible to configure grpc without the flags - but
instead allow users that do use absl flags to configure grpc using that
mechanism. Importantly this lets internal customers configure grpc the
same everywhere.
Future changes along this path will be two-fold:
1. Move documentation generation into the code generation step, so that
within the source of truth yaml file we can find all documentation and
data about a configuration knob - eliminating the chance of forgetting
to document something in all the right places.
2. Provide fuzzing over configurations. Currently most config variables
get stashed in static constants across the codebase. To fuzz over these
we'd need a way to reset those cached values between fuzzing rounds,
something that is terrifically difficult right now, but with these
changes should simply be a reset on `ConfigVars`.
<!--
If you know who should review your pull request, please assign it to
that
person, otherwise the pull request would get assigned randomly.
If your pull request is for a specific language, please add the
appropriate
lang label.
-->
---------
Co-authored-by: ctiller <ctiller@users.noreply.github.com>
AJ Heller
Mark D. Roth
Craig Tiller
Esun Kim
Bjorn Svensson
Eugene Ostroukhov
Yadong
Yijie Ma
Luwei Ge
Hannah Shi
Yingwei Fan
Luwei Ge
Yash Tibrewal
Vignesh Babu
Stanley Cheung
Alisha Nanda
Jan Tattermusch
