Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
Don't cast cmap init function pointers to an incompatible type.
Without this patch, the number of parameters between declaration and
the real signature differs. Calling such a function results in
undefined behavior.
ISO/IEC 9899:TC3 (Committee Draft September 7, 2007)
6.5.2.2 Function calls
9 If the function is defined with a type that is not
compatible with the type (of the expression) pointed to by
the expression that denotes the called function, the
behavior is undefined.
On certain platforms (c -> js with emscripten) this causes
termination of execution or invalid calls because in the emscripten
implementation, function pointers of different types are stored in
different pointer arrays. Incorrect pointer type here results in
indexing of an incorrect array.
* src/cff/cffcmap.c (cff_cmap_encoding_init, cff_cmap_unicode_init),
src/pfr/pfrcmap.c (pfr_cmap_init), src/psaux/t1cmap.c
t1_cmap_standard_init, t1_cmap_expert_init, t1_cmap_custom_init,
t1_cmap_unicode_init), src/winfonts/winfnt.c (fnt_cmap_init): Fix
signature.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
src/base/ftmac.c, src/base/ftrfork.c, src/lzw/ftzopen.c,
src/raster/ftrend1.c, src/sfnt/ttpost.c, src/truetype/ttgxvar.c,
src/type42/t42parse.c, src/winfonts/winfnt.c: hardening the code
against out-of-bounds conditions when allocating arrays. This is
for the cases where FT_NEW_ARRAY and FT_RENEW_ARRAY are not used
already. Introducing the new FT_ALLOC_MULT and FT_REALLOC_MULT
macros.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
* src/bdf/bdfdrivr.c (BDF_Size_Request, BDF_Size_Select),
src/pcf/pcfdrivr.c (PCF_Size_Request, PCF_Size_Select),
src/winfonts/winfnt.c (FNT_Size_Request, FNT_Size_Select): Do size
matching for request of type NOMINAL and REAL_DIM.
* src/winfonts/winfnt.c (FNT_Face_Init): Print trace message when
`pixel_height' is used for nominal height.
* src/base/ftobjs.c (FT_Request_Size): Call `FT_Match_Size' if the
face is bitmap only and driver doesn't provide `request_size'. This
is added merely for completion as no driver satisfies the conditions.
Werner Lemberg
Jarkko Pöyry
Vinnie Falco
suzuki toshiya
Oran Agra
David Turner
Wu, Chia-I (吳佳一)