For historic reasons, we have users depending on ares_set_servers_*()
to return ARES_SUCCESS when passing no servers and actually *clear*
the server list. It appears they do this for test cases to simulate
DNS unavailable or similar. Presumably they could achieve the same
effect in other ways (point to localhost on a port that isn't in use).
But it seems like this might be wide-spread enough to cause headaches
so we just will document and test for this behavior, clearly it hasn't
caused "issues" for anyone with the old behavior.
See: https://github.com/nodejs/node/pull/50800
Fix By: Brad House (@bradh352)
The `ares_dns_record_t` data structure created in the prior release is capable of holding a complete parsed DNS message and also provides all helpers in order to fill in the data structure. This PR adds write capabilities for this data structure to form a complete message and supports features such as DNS name compression as defined in RFC1035. Though this message writing capability goes further than c-ares internally needs, external users may find it useful ... and we may find it useful for test validation as well.
This also replaces the existing message writing code in `ares_create_query()`, as well rewriting the request message without EDNS in ares_process.c's `process_answer()`.
Fix By: Brad House (@bradh352)
`ares_channel` is defined as `typedef struct ares_channeldata *ares_channel;`. The problem with this, is it embeds the pointer into the typedef, which means an `ares_channel` can never be declared as `const` as if you write `const ares_channel channel`, that expands to `struct ares_channeldata * const ares_channel` and not `const struct ares_channeldata *channel`.
We will now typedef `ares_channel_t` as `typedef struct ares_channeldata ares_channel_t;`, so if you write `const ares_channel_t *channel`, it properly expands to `const struct ares_channeldata *channel`.
We are maintaining the old typedef for API compatibility with existing integrations, and due to typedef expansion this should not even cause any compiler warnings for existing code. There are no ABI implications with this change. I could be convinced to keep existing public functions as `ares_channel` if a sufficient argument exists, but internally we really need make this change for modern best practices.
This change will allow us to internally use `const ares_channel_t *` where appropriate. Whether or not we decide to change any public interfaces to use `const` may require further discussion on if there might be ABI implications (I don't think so, but I'm also not 100% sure what a compiler internally does with `const` when emitting machine code ... I think more likely ABI implications would occur going the opposite direction).
FYI, This PR was done via a combination of sed and clang-format, the only manual code change was the addition of the new typedef, and a couple doc fixes :)
Fix By: Brad House (@bradh352)
This PR makes the server list a dynamic sorted list of servers. The sort order is [ consecutive failures, system config index ]. The server list can be updated via ares_set_servers_*(). Any queries currently directed to servers that are no longer in the list will be automatically re-queued to a different server.
Also, any time a failure occurs on the server, the sort order of the servers will be updated so that the one with the fewest consecutive failures is chosen for the next query that goes on the wire, this way bad or non-responsive servers are automatically isolated.
Since the server list is now dynamic, the tracking of query failures per server has been removed and instead is relying on the server sort order as previously described. This simplifies the logic while also reducing the amount of memory required per query. However, because of this dynamic nature, it may not be easy to determine the server attempt order for enqueued queries if there have been any failures.
If using the ARES_OPT_ROTATE, this is now implemented to be a random selection of the configured servers. Since the server list is dynamic, its not possible to go to the next server as configuration could have changed between queries or attempts for the same query.
Finally, this PR moved some existing functions into new files to logically separate them.
This should address issues #550 and #440, while also setting the framework to implement #301. #301 needs a little more effort since it configures things other than the servers themselves (domains, search, sortlist, lookups), which need to make sure they can be safely updated.
Fix By: Brad House (@bradh352)
New DNS record parsing code. The old code was basically just some helper macros and functions for parsing an entire DNS message. The caller had to know the RFCs to use the parsers, except for some pre-made exceptions. The new parsing code parses the entire DNS message into an opaque data structure in a memory safe manner with various accessors for reading and manipulating the data.
The existing parser helpers for the various record types were reimplemented as wrappers around the new parser.
The accessors allow easy iteration across the DNS record datastructure, and can be used to easily create dig-like output without needing to know anything about the various record types and formats as dynamic helpers are provided for enumeration of values and data types of those values.
At some point in the future, this new DNS record structure, accessors, and parser will be exposed publicly. This is not done at this point as we don't want to do that until the API is completely stable. Likely a write() function to output the DNS record back into an actual message buffer will be introduced with the stable API as well.
Some subtle bugs in the existing code were uncovered, some which had test cases which turned out to be bogus. Validation with third-party implementations (e.g. BIND9) were performed to validate such cases were indeed bugs.
Adding additional RR parsers such as for TLSA (#470) or SVCB/HTTPS (#566) are trivial now since focus can be put on only parsing the data within the RR, not the entire message. That said, as the new parser is not yet public, it isn't clear the best way to expose any new RRs (probably best to wait for the new parser to be public rather than hacking in another legacy function).
Some additional RRs that are part of DNS RFC1035 or EDNS RFC6891 that didn't have previously implemented parsers are now also implemented (e.g. HINFO, OPT). Any unrecognized RRs are encapsulated into a "RAW_RR" as binary data which can be inserted or extracted, but are otherwise not interpreted in any way.
Fix By: Brad House (@bradh352)
All files have their licence and copyright information clearly
identifiable. If not in the file header, they are set separately in
.reuse/dep5.
All used license texts are provided in LICENSES/
The rc4 function iterates over a buffer of size buffer_len who's maximum
value is INT_MAX with a counter of type short that is not guaranteed to
have maximum size INT_MAX.
In circumstances where short is narrower than int and where buffer_len
is larger than the maximum value of a short, it may be possible to loop
infinitely as counter will overflow and never be greater than or equal
to buffer_len.
The solution is to make the comparison be between types of equal width.
This commit defines counter as an int.
Fix By: Fionn Fitzmaurice (@fionn)
Gregor Jasny
Brad House
Daniel Stenberg
Fionn Fitzmaurice