Completely rework the autotools build system, issues have cropped up due to the complexity and could cause issues on even semi-modern Linux systems (Ubuntu 20.04 for example).
Changes include:
Remove all curl/xc/cares m4 helper files, they go overboard on detections of functions and datatypes. Go back to more plain autoconf macros as they've come a long way over the years.
Use known systems and heuristics to determine datatypes for functions like send() and recv(), rather than the error prone detection which required thousands of permutations and might still get it wrong.
Remove unneeded configure arguments like --enable-debug or --enable-optimize, its more common for people to simply pass their own CFLAGS on the command line.
Only require CARES_STATICLIB definition on Windows static builds, its not necessary ever for other systems, even when hiding non-public symbols.
Remove some function and definition detections that were never used in c-ares
The test framework is now embedded into the toplevel configure system, there was no need to chain build the test system as it is never built externally to c-ares.
As a side-effect of the changes, a configure run completes in about 25% of the original time.
This has been tested on various Linux distributions (of varying age), FreeBSD, MacOS, Windows (via MSYS2 with Mingw), and Solaris10/11 (by @dfandrich), AIX 7.3 (by @dfandrich). It is not unlikely that this may have broken more esoteric or legacy systems, and we'll likely need to be ready to accept bug reports and patches, but it has removed over 10k lines of build system code. It is very likely any issues that crop up will add far fewer lines of code to fix such systems.
Fixes Bug: #670
Fix By: Brad House (@bradh352)
When doing ares_gethostbyname() or ares_getaddrinfo() with AF_UNSPEC, if ares_cancel() was called after one address class was returned but before the other address class, it would return ARES_SUCCESS rather than ARES_ECANCELLED.
Test case has been added for this specific condition.
Fixes Bug: #662
Fix By: Brad House (@bradh352)
Some environments may send router advertisements on a link setting their link-local (fe80::/10) address as a valid DNS server to the remote system. This will cause a DNS entry to be created like `fe80::1%iface`, since all link-local network interfaces are technically part of the same /10 subnet, it must be told what interface to send packets through explicitly if there are multiple physical interfaces.
This PR adds support for the %iface modifier when setting DNS servers via `/etc/resolv.conf` as well as via `ares_set_servers_csv()`.
For MacOS and iOS it is assumed that libresolve will set the `sin6_scope_id` and should be supported, but my test systems don't seem to read the Router Advertisement for RDNSS link-local. Specifying the link-local dns server on MacOS via adig has been tested and confirmed working.
For Windows, this is similar to MacOS in that the system doesn't seem to honor the RDNSS RA, but specifying manually has been tested to work.
At this point, Android support does not exist.
Fixes Bug #462
Supersedes PR #463
Fix By: Brad House (@bradh352) and Serhii Purik (@sergvpurik)
Regression from c-ares 1.19.1, ARES_OPT_UDP_PORT and ARES_OPT_TCP_PORT are
specified from the user in host-byte order, but there was a regression that
caused it to be read as if it was network byte order.
Fixes Bug: #640
Reported By: @Flow86
Fix By: Brad House (@bradh352)
This PR implements a query cache at the lowest possible level, the actual dns request and response messages. Only successful and `NXDOMAIN` responses are cached. The lowest TTL in the response message determines the cache validity period for the response, and is capped at the configuration value for `qcache_max_ttl`. For `NXDOMAIN` responses, the SOA record is evaluated.
For a query to match the cache, the opcode, flags, and each question's class, type, and name are all evaluated. This is to prevent matching a cached entry for a subtly different query (such as if the RD flag is set on one request and not another).
For things like ares_getaddrinfo() or ares_search() that may spawn multiple queries, each individual message received is cached rather than the overarching response. This makes it possible for one query in the sequence to be purged from the cache while others still return cached results which means there is no chance of ever returning stale data.
We have had a lot of user requests to return TTLs on all the various parsers like `ares_parse_caa_reply()`, and likely this is because they want to implement caching mechanisms of their own, thus this PR should solve those issues as well.
Due to the internal data structures we have these days, this PR is less than 500 lines of new code.
Fixes#608
Fix By: Brad House (@bradh352)
`ares_channel` is defined as `typedef struct ares_channeldata *ares_channel;`. The problem with this, is it embeds the pointer into the typedef, which means an `ares_channel` can never be declared as `const` as if you write `const ares_channel channel`, that expands to `struct ares_channeldata * const ares_channel` and not `const struct ares_channeldata *channel`.
We will now typedef `ares_channel_t` as `typedef struct ares_channeldata ares_channel_t;`, so if you write `const ares_channel_t *channel`, it properly expands to `const struct ares_channeldata *channel`.
We are maintaining the old typedef for API compatibility with existing integrations, and due to typedef expansion this should not even cause any compiler warnings for existing code. There are no ABI implications with this change. I could be convinced to keep existing public functions as `ares_channel` if a sufficient argument exists, but internally we really need make this change for modern best practices.
This change will allow us to internally use `const ares_channel_t *` where appropriate. Whether or not we decide to change any public interfaces to use `const` may require further discussion on if there might be ABI implications (I don't think so, but I'm also not 100% sure what a compiler internally does with `const` when emitting machine code ... I think more likely ABI implications would occur going the opposite direction).
FYI, This PR was done via a combination of sed and clang-format, the only manual code change was the addition of the new typedef, and a couple doc fixes :)
Fix By: Brad House (@bradh352)
HOSTS FILE PROCESSING OVERVIEW
==============================
The hosts file on the system contains static entries to be processed locally
rather than querying the nameserver. Each row is an IP address followed by
a list of space delimited hostnames that match the ip address. This is used
for both forward and reverse lookups.
We are caching the entire parsed hosts file for performance reasons. Some
files may be quite sizable and as per Issue #458 can approach 1/2MB in size,
and the parse overhead on a rapid succession of queries can be quite large.
The entries are stored in forwards and backwards hashtables so we can get
O(1) performance on lookup. The file is cached until the file modification
timestamp changes (or 60s if there is no implemented stat() capability).
The hosts file processing is quite unique. It has to merge all related hosts
and ips into a single entry due to file formatting requirements. For
instance take the below:
```
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost
192.168.1.1 host.example.com host
192.168.1.5 host.example.com host
2620🔢:1 host.example.com host6.example.com host6 host
```
This will yield 2 entries.
1) ips: `127.0.0.1,::1`
hosts: `localhost.localdomain,localhost`
2) ips: `192.168.1.1,192.168.1.5,2620🔢:1`
hosts: `host.example.com,host,host6.example.com,host6`
It could be argued that if searching for `192.168.1.1` that the `host6`
hostnames should not be returned, but this implementation will return them
since they are related (both ips have the fqdn of host.example.com). It is
unlikely this will matter in the real world.
Fix By: Brad House (@bradh352)
c-ares uses multiple code styles, standardize on one. Talking with @bagder he feels strongly about maintaining an 80 column limit, but feels less strongly about things I feel strongly about (like alignment).
Can re-run the formatter on the codebase via:
```
clang-format -i */*.c */*.h */*/*.c */*/*.h
```
Fix By: Brad House (@bradh352)
As per #266, TCP queries are basically broken. If we get a partial reply, things just don't work, but unlike UDP, TCP may get fragmented and we need to properly handle that.
I've started creating a basic parser/buffer framework for c-ares for memory safety reasons, but it also helps for things like this where we shouldn't be manually tracking positions and fetching only a couple of bytes at a time from a socket. This parser/buffer will be expanded and used more in the future.
This also resolves#206 by allowing NULL to be specified for some socket callbacks so they will auto-route to the built-in c-ares functions.
Fixes: #206, #266
Fix By: Brad House (@bradh352)
All files have their licence and copyright information clearly
identifiable. If not in the file header, they are set separately in
.reuse/dep5.
All used license texts are provided in LICENSES/
ares_gethostbyname() and ares_getaddrinfo() do a lot of similar things, however ares_getaddrinfo() has some desirable behaviors that should be imported into ares_gethostbyname(). For one, it sorts the address lists for the most likely to succeed based on the current system routes. Next, when AF_UNSPEC is specified, it properly handles search lists instead of first searching all of AF_INET6 then AF_INET, since ares_gethostbyname() searches in parallel. Therefore, this PR should also resolve the issues attempted in #94.
A few things this PR does:
1. ares_parse_a_reply() and ares_parse_aaaa_reply() had very similar code to translate struct ares_addrinfo into a struct hostent as well as into struct ares_addrttl/ares_addr6ttl this has been split out into helper functions of ares__addrinfo2hostent() and ares__addrinfo2addrttl() to prevent this duplicative code.
2. ares_getaddrinfo() was apparently never honoring HOSTALIASES, and this was discovered once ares_gethostbyname() was turned into a wrapper, the affected test cases started failing.
3. A slight API modification to save the query hostname into struct ares_addrinfo as the last element of name. Since this is the last element, and all user-level instances of struct ares_addrinfo are allocated internally by c-ares, this is not an ABI-breaking change nor would it impact any API compatibility. This was needed since struct hostent has an h_name element.
4. Test Framework: MockServer tests via TCP would fail if more than 1 request was received at a time which is common when ares_getaddrinfo() queries for both A and AAAA records simultaneously. Infact, this was a long standing issue in which the ares_getaddrinfo() test were bypassing TCP alltogether. This has been corrected, the message is now processed in a loop.
5. Some tests had to be updated for overall correctness as they were invalid but somehow passing prior to this change.
Change By: Brad House (@bradh352)
There is too much inconsistency between platforms for arpa/nameser.h and arpa/nameser_compat.h for the way the current files are structured. Still load the respective system files but make our private nameser.h more forgiving.
Fixes: #388
Fix By: Brad House (@bradh352)
The c-ares test suite was hardcoded to use port 5300 (and possibly 5301, 5302) for the test suite. Especially in containers, there may be no guarantee these ports are available and cause tests to fail when they could otherwise succeed. Instead, request the system to assign a port to use dynamically. This is now the default. To override, the test suite still takes the "-p <port>" option as it always has and will honor that.
Fix By: Anthony Penniston (@apenn-msft)
The rc4 function iterates over a buffer of size buffer_len who's maximum
value is INT_MAX with a counter of type short that is not guaranteed to
have maximum size INT_MAX.
In circumstances where short is narrower than int and where buffer_len
is larger than the maximum value of a short, it may be possible to loop
infinitely as counter will overflow and never be greater than or equal
to buffer_len.
The solution is to make the comparison be between types of equal width.
This commit defines counter as an int.
Fix By: Fionn Fitzmaurice (@fionn)
Brad House
Daniel Stenberg
apenn-msft
Fionn Fitzmaurice