diff --git a/buildconf b/buildconf
index e997c219..4e4c17e9 100755
--- a/buildconf
+++ b/buildconf
@@ -1,297 +1,4 @@
 #!/bin/sh
 
-#--------------------------------------------------------------------------
-# die prints argument string to stdout and exits this shell script.
-#
-die(){
-  echo "buildconf: $@"
-  exit 1
-}
-
-#--------------------------------------------------------------------------
-# findtool works as 'which' but we use a different name to make it more
-# obvious we aren't using 'which'! ;-)
-#
-findtool(){
-  file="$1"
-
-  if { echo "$file" | grep "/" >/dev/null 2>&1; } then
-    # when file is given with a path check it first
-    if test -f "$file"; then
-      echo "$file"
-      return
-    fi
-  fi
-
-  old_IFS=$IFS; IFS=':'
-  for path in $PATH
-  do
-    IFS=$old_IFS
-    # echo "checks for $file in $path" >&2
-    if test -f "$path/$file"; then
-      echo "$path/$file"
-      return
-    fi
-  done
-  IFS=$old_IFS
-}
-
-#--------------------------------------------------------------------------
-# removethis() removes all files and subdirectories with the given name,
-# inside and below the current subdirectory at invocation time.
-#
-removethis(){
-  if test "$#" = "1"; then
-    find . -depth -name $1 -print > buildconf.tmp.$$
-    while read fdname
-    do
-      if test -f "$fdname"; then
-        rm -f "$fdname"
-      elif test -d "$fdname"; then
-        rm -f -r "$fdname"
-      fi
-    done < buildconf.tmp.$$
-    rm -f buildconf.tmp.$$
-  fi
-}
-
-#--------------------------------------------------------------------------
-# Ensure that buildconf runs from the subdirectory where configure.ac lives
-#
-if test ! -f configure.ac ||
-  test ! -f src/lib/ares_init.c ||
-  test ! -f m4/cares-functions.m4; then
-  echo "Can not run buildconf from outside of c-ares source subdirectory!"
-  echo "Change to the subdirectory where buildconf is found, and try again."
-  exit 1
-fi
-
-#--------------------------------------------------------------------------
-# GNU libtool preliminary check
-#
-want_lt_major=1
-want_lt_minor=4
-want_lt_patch=2
-want_lt_version=1.4.2
-
-# This approach that tries 'glibtoolize first is intended for systems that
-# have GNU libtool named as 'glibtoolize' and libtoolize not being GNU's.
-
-libtoolize=`findtool glibtoolize 2>/dev/null`
-if test ! -x "$libtoolize"; then
-  libtoolize=`findtool ${LIBTOOLIZE:-libtoolize}`
-fi
-if test -z "$libtoolize"; then
-  echo "buildconf: libtoolize not found."
-  echo "    You need GNU libtoolize $want_lt_version or newer installed."
-  exit 1
-fi
-
-lt_pver=`$libtoolize --version 2>/dev/null|head -n 1`
-lt_qver=`echo $lt_pver|sed -e "s/([^)]*)//g" -e "s/^[^0-9]*//g"`
-lt_version=`echo $lt_qver|sed -e "s/[- ].*//" -e "s/\([a-z]*\)$//"`
-if test -z "$lt_version"; then
-  echo "buildconf: libtoolize not found."
-  echo "    You need GNU libtoolize $want_lt_version or newer installed."
-  exit 1
-fi
-old_IFS=$IFS; IFS='.'; set $lt_version; IFS=$old_IFS
-lt_major=$1
-lt_minor=$2
-lt_patch=$3
-
-if test -z "$lt_major"; then
-  lt_status="bad"
-elif test "$lt_major" -gt "$want_lt_major"; then
-  lt_status="good"
-elif test "$lt_major" -lt "$want_lt_major"; then
-  lt_status="bad"
-elif test -z "$lt_minor"; then
-  lt_status="bad"
-elif test "$lt_minor" -gt "$want_lt_minor"; then
-  lt_status="good"
-elif test "$lt_minor" -lt "$want_lt_minor"; then
-  lt_status="bad"
-elif test -z "$lt_patch"; then
-  lt_status="bad"
-elif test "$lt_patch" -gt "$want_lt_patch"; then
-  lt_status="good"
-elif test "$lt_patch" -lt "$want_lt_patch"; then
-  lt_status="bad"
-else
-  lt_status="good"
-fi
-if test "$lt_status" != "good"; then
-  echo "buildconf: libtoolize version $lt_version found."
-  echo "    You need GNU libtoolize $want_lt_version or newer installed."
-  exit 1
-fi
-
-#--------------------------------------------------------------------------
-# perl check
-#
-PERL=`findtool ${PERL:-perl}`
-if test -z "$PERL"; then
-  echo "buildconf: perl not found"
-  exit 1
-fi
-
-#--------------------------------------------------------------------------
-# Remove files generated on previous buildconf/configure run.
-#
-for fname in .deps \
-    .libs \
-    *.la \
-    *.lo \
-    *.a \
-    *.o \
-    Makefile \
-    Makefile.in \
-    aclocal.m4 \
-    aclocal.m4.bak \
-    ares_build.h \
-    ares_config.h \
-    ares_config.h.in \
-    autom4te.cache \
-    compile \
-    config.guess \
-    config.log \
-    config.lt \
-    config.status \
-    config.sub \
-    configure \
-    depcomp \
-    libcares.pc \
-    libtool \
-    libtool.m4 \
-    libtool.m4.tmp \
-    ltmain.sh \
-    ltoptions.m4 \
-    ltsugar.m4 \
-    ltversion.m4 \
-    lt~obsolete.m4 \
-    missing \
-    stamp-h1 \
-    stamp-h2 ; do
-  removethis "$fname"
-done
-
-#--------------------------------------------------------------------------
-# run the correct scripts now
-#
-
-echo "buildconf: running libtoolize"
-${libtoolize} --copy --automake --force || die "libtoolize command failed"
-
-# When using libtool 1.5.X (X < 26) we copy libtool.m4 to our local m4
-# subdirectory and this local copy is patched to fix some warnings that
-# are triggered when running aclocal and using autoconf 2.62 or later.
-
-if test "$lt_major" = "1" && test "$lt_minor" = "5"; then
-  if test -z "$lt_patch" || test "$lt_patch" -lt "26"; then
-    echo "buildconf: copying libtool.m4 to local m4 subdir"
-    ac_dir=`${ACLOCAL:-aclocal} --print-ac-dir`
-    if test -f $ac_dir/libtool.m4; then
-      cp -f $ac_dir/libtool.m4 m4/libtool.m4
-    else
-      echo "buildconf: $ac_dir/libtool.m4 not found"
-    fi
-    if test -f m4/libtool.m4; then
-      echo "buildconf: renaming some variables in local m4/libtool.m4"
-      $PERL -i.tmp -pe \
-        's/lt_prog_compiler_pic_works/lt_cv_prog_compiler_pic_works/g; \
-         s/lt_prog_compiler_static_works/lt_cv_prog_compiler_static_works/g;' \
-        m4/libtool.m4
-      rm -f m4/libtool.m4.tmp
-    fi
-  fi
-fi
-
-if test -f m4/libtool.m4; then
-  echo "buildconf: converting all mv to mv -f in local m4/libtool.m4"
-  $PERL -i.tmp -pe 's/\bmv +([^-\s])/mv -f $1/g' m4/libtool.m4
-  rm -f m4/libtool.m4.tmp
-fi
-
-echo "buildconf: running aclocal"
-${ACLOCAL:-aclocal} -I m4 $ACLOCAL_FLAGS || die "aclocal command failed"
-
-echo "buildconf: converting all mv to mv -f in local aclocal.m4"
-$PERL -i.bak -pe 's/\bmv +([^-\s])/mv -f $1/g' aclocal.m4
-
-echo "buildconf: running autoheader"
-${AUTOHEADER:-autoheader} || die "autoheader command failed"
-
-echo "buildconf: running autoconf"
-${AUTOCONF:-autoconf} || die "autoconf command failed"
-
-echo "buildconf: running automake"
-${AUTOMAKE:-automake} --add-missing --copy || die "automake command failed"
-
-#--------------------------------------------------------------------------
-# GNU libtool complementary check
-#
-# Depending on the libtool and automake versions being used, config.guess
-# might not be installed in the subdirectory until automake has finished.
-# So we can not attempt to use it until this very last buildconf stage.
-#
-if test ! -f ./config.guess; then
-  echo "buildconf: config.guess not found"
-else
-  buildhost=`./config.guess 2>/dev/null|head -n 1`
-  case $buildhost in
-    *-*-darwin*)
-      need_lt_major=1
-      need_lt_minor=5
-      need_lt_patch=26
-      need_lt_check="yes"
-      ;;
-    *-*-hpux*)
-      need_lt_major=1
-      need_lt_minor=5
-      need_lt_patch=24
-      need_lt_check="yes"
-      ;;
-  esac
-  if test ! -z "$need_lt_check"; then
-    if test -z "$lt_major"; then
-      lt_status="bad"
-    elif test "$lt_major" -gt "$need_lt_major"; then
-      lt_status="good"
-    elif test "$lt_major" -lt "$need_lt_major"; then
-      lt_status="bad"
-    elif test -z "$lt_minor"; then
-      lt_status="bad"
-    elif test "$lt_minor" -gt "$need_lt_minor"; then
-      lt_status="good"
-    elif test "$lt_minor" -lt "$need_lt_minor"; then
-      lt_status="bad"
-    elif test -z "$lt_patch"; then
-      lt_status="bad"
-    elif test "$lt_patch" -gt "$need_lt_patch"; then
-      lt_status="good"
-    elif test "$lt_patch" -lt "$need_lt_patch"; then
-      lt_status="bad"
-    else
-      lt_status="good"
-    fi
-    if test "$lt_status" != "good"; then
-      need_lt_version="$need_lt_major.$need_lt_minor.$need_lt_patch"
-      echo "buildconf: libtool version $lt_version found."
-      echo "            $buildhost requires GNU libtool $need_lt_version or newer installed."
-      rm -f configure
-      exit 1
-    fi
-  fi
-fi
-
-#--------------------------------------------------------------------------
-# Finished successfully.
-#
-echo "buildconf: OK"
-
-if test -f "test/buildconf"; then
-  cd test && ./buildconf
-fi
-
-exit 0
+echo "*** Do not use buildconf. Instead, just use: autoreconf -fi" >&2
+exec ${AUTORECONF:-autoreconf} -fi "${@}"
diff --git a/install-sh b/install-sh
deleted file mode 100755
index 377bb868..00000000
--- a/install-sh
+++ /dev/null
@@ -1,527 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-11-20.07; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test X"$d" = X && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/mkinstalldirs b/mkinstalldirs
deleted file mode 100755
index 55d537f8..00000000
--- a/mkinstalldirs
+++ /dev/null
@@ -1,162 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-IFS=" ""	$nl"
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage"
-      exit $?
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --version)
-      echo "$0 $scriptversion"
-      exit $?
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error.  This is a problem when calling mkinstalldirs
-# from a parallel make.  We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
-  '')
-    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    else
-      # On NextStep and OpenStep, the 'mkdir' command does not
-      # recognize any option.  It will interpret all options as
-      # directories to create, and then abort because '.' already
-      # exists.
-      test -d ./-p && rmdir ./-p
-      test -d ./--version && rmdir ./--version
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
-       test ! -d ./--version; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    else
-      # Clean up after NextStep and OpenStep mkdir.
-      for d in ./-m ./-p ./--version "./$dirmode";
-      do
-        test -d $d && rmdir $d
-      done
-    fi
-    ;;
-esac
-
-for file
-do
-  case $file in
-    /*) pathcomp=/ ;;
-    *)  pathcomp= ;;
-  esac
-  oIFS=$IFS
-  IFS=/
-  set fnord $file
-  shift
-  IFS=$oIFS
-
-  for d
-  do
-    test "x$d" = x && continue
-
-    pathcomp=$pathcomp$d
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-	errstatus=$lasterr
-      else
-	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-	  lasterr=
-	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-	  if test ! -z "$lasterr"; then
-	    errstatus=$lasterr
-	  fi
-	fi
-      fi
-    fi
-
-    pathcomp=$pathcomp/
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: