We use unsigned, but we actually assume it is 32-bit for the bit-packing
strategy. But also introduce a typedef to hint that callers shouldn't
treat it as an arbitrary 32-bit integer. A typedef would also allow us
to extend to uint64_t in the future, if we ever need to.
Update-Note: Some APIs switch from unsigned * to uint32_t * out
pointers. This is only source-compatible if unsigned and uint32_t are
the exact same type. The CQ suggests this is indeed true. If they are
not, replace unsigned with CBS_ASN1_TAG to fix the build.
Bug: 525
Change-Id: I45cbe127c1aa252f5f6a169dca2e44d1e6e1d669
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/54986
Reviewed-by: Bob Beck <bbe@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
We spend a lot of effort implementing a big-endian sequence number
update, etc., when the sequence number is just a 64-bit counter. (Or
48-bit counter in DTLS because we currently retain the epoch
separately. We can probably tidy that a bit too, but I'll leave that
for later. Right now the DTLS record layer state is a bit entwined
with the TLS one.)
Just store it as uint64_t. This should also simplify
https://boringssl-review.googlesource.com/c/boringssl/+/54325 a little.
Change-Id: I95233f924a660bc523b21496fdc9211055b75073
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/54505
Reviewed-by: Bob Beck <bbe@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
This runs through much the same code as the TLS 1.3 bits, though we use
a different hint field to avoid mixups between the fields. (Otherwise
the receiver may misinterpret a decryptPSK hint as the result of
decrypting the session_ticket extension, or vice versa. This could
happen if a ClientHello contains both a PSK and a session ticket.)
Bug: 504
Change-Id: I968bafe12120938e6e46e52536efd552b12c66a0
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/53805
Auto-Submit: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Follow-up work will add support for TLS 1.2 ticket decryption.
Bug: 504
Change-Id: Ieaee37d94562040f1d51227216359bd63db15198
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/53525
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Bob Beck <bbe@google.com>
While decompression is deterministic, compression is not. New revisions
of the compression algorithm may start using different (hopefully
smaller!) compressions. So this doesn't cause hint mismatches, add a
certificate compression hint. If the shim's Certificate message matches
the handshaker, we'll reuse the already compressed message.
This also adds what appears to be a missing test for when the server
cannot find compression algorithms in common.
Change-Id: Idbedaceb20208463d8f61581ee27971c17fcd126
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/48005
Reviewed-by: Adam Langley <agl@google.com>
The first thing any deployment will want to monitor is whether ECH was
actually used. Also it's useful if the command-line tool can output
this. (The alert is how the client signals it discarded the connection
due to ECH reject.)
This also disables ECH with the handoff mechanism for now. (The
immediate cause being that ech_accept isn't serialized.) We'll probably
need to make some decisions around the ordering here, since ECH affects
where the true ClientHello is available.
Bug: 275
Change-Id: Ie4559733290e653a514fcd94431090bf86bc3172
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/47911
Reviewed-by: Adam Langley <agl@google.com>
The channel_id_valid bit is both used for whether channel_id is filled
in (SSL_get_tls_channel_id), and whether this particular handshake will
eventually negotiate Channel ID.
The former means that, if SSL_get_tls_channel_id is called on the
client, we'll return all zeros. Apparently we never fill in channel_id
on the client at all. The latter means the state needs to be reset on
renegotiation because we do not currently forbid renegotiation with
Channel ID (we probably should...), which is the last use of the init
callback for extensions.
Instead, split this into a bit for the handshake and a bit for the
connection. Note this means we actually do not expose or even retain
whether Channel ID was used on the client.
This requires a tweak to the handoff logic, but it should be compatible.
The serialized ssl->s3->channel_id was always a no-op: the handback
happens before the ChannelID message, except in RSA key exchange. But we
forbid Channel ID in RSA key exchange anyway.
Update-Note: SSL_get_tls_channel_id will no longer return all zeros
during the handshake or on the client. I did not find any callers
relying on this.
Change-Id: Icd4b78dd3f311d1c7dfc1cae7d2b86dc7e327a99
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/47906
Reviewed-by: Adam Langley <agl@google.com>
We didn't end up deploying this. We also never implemented the final
RFC, so what we do have isn't useful for someone who wishes to deploy
it anyway.
Update-Note: Token binding APIs are removed.
Change-Id: Iecea7c3dcf9d3e2644a3b7afaf61511310b45d5f
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/47584
Reviewed-by: Adam Langley <agl@google.com>
See go/handshake-hints (internal).
CL originally by Bin Wu <wub@google.com>. I just reworked the tests and
tidied it up a bit. This is the start of a replacement for the split
handshakes API. For now, only TLS 1.3 is supported. It starts with an
initial set of hints, but we can add more later. (In particular, we
should probably apply the remote handshaker's extension order to avoid
needing to capability protect such changes.)
Change-Id: I7b6a6dfaa84c6c6e3436d2a4026c3652b8a79f0f
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/46535
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This CL adds an initial implementation of the ECH server, with pieces of
the client in BoGo as necessary for testing. In particular, the server
supports ClientHelloInner compression with ech_outer_extensions. When
ECH decryption fails, it can send retry_configs back to the client.
This server passes the "ech-accept" and "ech-reject" test cases in
tls-interop-runner[0] when tested against both the cloudflare-go and nss
clients. For reproducibility, I started with the main branch at commit
707604c262d8bcf3e944ed1d5a675077304732ce and updated the endpoint's
script to pass the server's ECHConfig and private key to the boringssl
tool.
Follow-up CLs will update HPKE to the latest draft and catch us up to
draft-10.
[0]: https://github.com/xvzcf/tls-interop-runner
Bug: 275
Change-Id: I49be35af46d1fd5dd9c62252f07d0bae179381ab
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/45285
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
(Original CL by svaldez, reworked by davidben.)
Change-Id: I8570808fa5e96a1c9e6e03c4877039a22e73254f
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/42404
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
David Benjamin
Daniel McArdle
Steven Valdez
Adam Langley