This is cribbed, with perimssion, from AWS-LC. The FIPS service
indicator[1] signals when an approved service has been completed.
[1] FIPS 140-3 IG 2.4.C
Change-Id: Ib40210d69b3823f4d2a500b23a1606f8d6942f81
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/52568
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
strcasecmp is locale-sensitive, which can cause some mishaps.
This CL should be a no-op, because this call is only used on Android,
and bionic's strcasecmp seems to be ASCII-only. But using
OPENSSL_strcasecmp everywhere is easier to reason about.
Change-Id: Iecf9bc4da1bb3a4ab87b1e8b1d7f6f6c6e44aceb
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/52305
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
On Arm, our CRYPTO_is_*_capable functions check the corresponding
preprocessor symbol. This allows us to automatically drop dynamic checks
and fallback code when some capability is always avilable.
This CL does the same on x86, as well as consolidates our
OPENSSL_ia32cap_P checks in one place. Since this abstraction is
incompatible with some optimizations we do around OPENSSL_ia32cap_get()
in the FIPS module, I've marked the symbol __attribute__((const)), which
is enough to make GCC and Clang do the optimizations for us. (We already
do the same to DEFINE_BSS_GET.)
Most x86 platforms support a much wider range of capabilities, so this
is usually a no-op. But, notably, all x86_64 Mac hardware has SSSE3
available, so this allows us to statically drop an AES implementation.
(On macOS with -Wl,-dead_strip, this seems to trim 35080 bytes from the
bssl binary.) Configs like -march=native can also drop a bunch of code.
Update-Note: This CL may break build environments that incorrectly mark
some instruction as statically available. This is unlikely to happen
with vector instructions like AVX, where the compiler could freely emit
them anyway. However, instructions like AES-NI might be set incorrectly.
Change-Id: I44fd715c9887d3fda7cb4519c03bee4d4f2c7ea6
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/51548
Reviewed-by: Adam Langley <agl@google.com>
fips_break_test.h is a bad name because generate_build_files.py thinks
that it's a test file, which it is, but one that's needed in the main
build. Thanks to Svilen Kanev for noting this.
That header doesn't particularly carry its weight. The idea was that
rebuilding the break test wouldn't need to rebuild everything if that
logic was isolated in its own header. But we only have to rebuild once
now, so whatever. There's already a block of crypto/internal.h with very
similar stuff; it can go there.
Change-Id: Ifb479eafd4df9a7aac4804cae06ba87257c77fc3
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/51485
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
FIPS validation requires showing that the continuous and start-up tests
are effective by breaking them. Traditionally BoringSSL used #defines
that tweaked the expected values. However, 140-3 now requires that the
inputs be changed, not the expected outputs.
Also, the number of tests is going to increase. Since slower platforms
already took too long to compile BoringSSL n times (once for each test
to break) we want something faster too.
Therefore all the known-answer tests (KATs) are changed such that a Go
program can find and replace the input value in order to break them.
Thus we only need to recompile once to disable the integrity test.
The runtime tests still need a #define to break, but that #define is now
put in a header file so that only the module need be recompiled, not
everything as in the previous system.
Change-Id: Ib621198e6ad02253e29af0ccd978e3c3830ad54c
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/51329
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
These symbols were not marked OPENSSL_EXPORT, so they weren't really
usable externally anyway. They're also very sensitive to various build
configuration toggles, which don't always get reflected into projects
that include our headers. Move them to crypto/internal.h.
Change-Id: I79a1fcf0b24e398d75a9cc6473bae28ec85cb835
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/50846
Reviewed-by: Adam Langley <agl@google.com>
GCC has a warning that complains about even more type mismatches in
printf. Some of these are a bit messy and will be fixed in separate CLs.
This covers the easy ones.
The .*s stuff is unfortunate, but printf has no size_t-clean string
printer. ALPN protocol lengths are bound by uint8_t, so it doesn't
really matter.
The IPv6 printing one is obnoxious and arguably a false positive. It's
really a C language flaw: all types smaller than int get converted to
int when you do arithmetic. So something like this first doesn't
overflow the shift because it computes over int, but then the result
overall is stored as an int.
uint8_t a, b;
(a << 8) | b
On the one hand, this fixes a "missing" cast to uint16_t before the
shift. At the same time, the incorrect final type means passing it to
%x, which expects unsigned int. The compiler has forgotten this value
actually fits in uint16_t and flags a warning. Mitigate this by storing
in a uint16_t first.
The story doesn't quite end here. Arguments passed to variadic functions
go through integer promotion[0], so the argument is still passed to
snprintf as an int! But then va_arg allows for a signedness mismatch[1],
provided the value is representable in both types. The combination means
that %x, though actually paired with unsigned, also accept uint8_t and
uint16_t, because those are guaranteed to promote to an int that meets
[1]. GCC recognizes [1] applies here.
(There's also PRI16x, but that's a bit tedious to use and, in glibc, is
defined as plain "x" anyway.)
[0] https://en.cppreference.com/w/c/language/conversion#Default_argument_promotions
[1] https://en.cppreference.com/w/c/variadic/va_arg
Bug: 450
Change-Id: Ic1d41356755a18ab922956dd2e07b560470341f4
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/50765
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
GCC 11.2.1 reportedly warns that CTR_DRBG_init may be passed an
uninitialized personalization buffer. This appears to be a false
positive, because personalization_len will be zero. But it's easy enough
to zero-initialize it, so silence the warning.
Bug: 432
Change-Id: I20f6b74e09f19962e8cae37d45090ff3d1c0215d
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/49245
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Trusty wants to seed from a different RNG than the one that supplies
per-draw entropy. This is a no-op change unless you're substituting in
your own implementations of these functions.
To see that it's a no-op in urandom.c, note that it only changes the
|seed| argument to |fill_with_entropy|. That causes the value of
|extra_getrandom_flags_for_seed_bss_get| to be ORed into the flags,
but that value will always be zero unless it's an Android FIPS build.
Change-Id: Ic8d954df3074559cbf1bfee1ae91a4a2b7e14d9d
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/48485
Reviewed-by: David Benjamin <davidben@google.com>
Because file names are not enclosed in quotation marks in the open call.
https://bugs.chromium.org/p/boringssl/issues/detail?id=415
```
cmake --build "C:\Projects\ Extern\Visual C++ 2015\x64 Debug\Build\BoringSSL\."
[9/439] Generating rdrand-x86_64.asm
FAILED: crypto/fipsmodule/rdrand-x86_64.asm
cmd.exe /C "cd /D "C:\Projects\ Extern\Visual C++ 2015\x64 Debug\Build\BoringSSL\crypto\fipsmodule" && "C:\Program Files\CMake\bin\cmake.exe" -E make_directory . && C:\Perl64\bin\perl.exe "C:/Projects/ Extern/Source/BoringSSL/crypto/fipsmodule/rand/asm/rdrand-x86_64.pl" nasm rdrand-x86_64.asm"
Can't open perl script "C:/Projects/": No such file or directory
error closing STDOUT at C:/Projects/ Extern/Source/BoringSSL/crypto/fipsmodule/rand/asm/rdrand-x86_64.pl line 87.
ninja: build stopped: subcommand failed.
```
Bug: 415
Change-Id: I83c4a460689b9adeb439425ad390322ae8b2002a
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/47884
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
In FIPS mode, we maintain a lock in order to implement clearing DRBG
state on process shutdown. This lock serves two purposes:
1. It protects the linked list of all DRBG states, which needs to be
updated the first time a thread touches RAND_bytes, when a thread
exits, and on process exit.
2. It ensures threads alive during process shutdown do not accidentally
touch DRBGs after they are cleared, by way of taking a ton of read
locks in RAND_bytes across some potentially time-consuming points.
This means that when one of the rare events in (1) happens, it must
contend with the flurry of read locks in (2). Split these uses into two
locks. The second lock now only ever sees read locks until process
shutdown, and the first lock is only accessed in rare cases.
Change-Id: Ib856c7a3bb937bbfa5d08534031dbf4ed3315cab
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/45844
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Rather than the FIPS module actively collecting entropy from the CPU or
OS, this change configures Android FIPS to passively receive entropy.
See FIPS IG 7.14 section two.
Change-Id: Ibfc5c5042e560718474b89970199d35b67c21296
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/44305
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
See b/169780122. This CL should be a no-op (the only other OPENSSL_LINUX
defines are in urandom/getrandom logic, which Trusty doesn't use), but
should be easier to work for future code.
Change-Id: I7676ce234a20ddaf54a881f2da1e1fcd680d1c78
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/43224
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Trusty doesn't have madvise() or sysconf() and more importantly,
doesn't have fork() (confirmed chatting to ncbray), so the
no-op #if branch in fork_detect.c seems appropriate.
Change-Id: I41b41e79d59919bae6c6ece0e0efd3872105e9b1
Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/43204
Commit-Queue: Pete Bentley <prb@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Adam Langley
David Benjamin
Florin Crișan
Bradley Hess
Pete Bentley