Chiebot-Mirror/boringssl - boringssl - Gitea: Git with a cup of tea

Author	SHA1	Message	Date
David Benjamin	493d5cbedd	Try to require C++14. Now that we've dropped MSVC 2015, I believe we can rely on C++14 (which is now seven years old). This switches the build to require C++14. I've gone ahead and switched code in both public headers and within the library, but if the public headers are a problem, we can revert those separately. C++14 doesn't get us quite as much as C++17, but see if we can get to C++14 first. Still, std::enable_if_t and the less restricted constexpr are nice wins. Update-Note: C++14 is now required to build BoringSSL. If the build breaks, make sure your compiler is C++14-capable and is not passing -std=c++11. If this is causing problems for your project, let us know. Change-Id: If03a88e3f8a11980180781f95b806e7f3c3cb6c3 Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/52246 Reviewed-by: Adam Langley <agl@google.com> Commit-Queue: David Benjamin <davidben@google.com>	3 years ago
David Benjamin	661266ea06	Move CPU detection symbols to crypto/internal.h. These symbols were not marked OPENSSL_EXPORT, so they weren't really usable externally anyway. They're also very sensitive to various build configuration toggles, which don't always get reflected into projects that include our headers. Move them to crypto/internal.h. Change-Id: I79a1fcf0b24e398d75a9cc6473bae28ec85cb835 Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/50846 Reviewed-by: Adam Langley <agl@google.com>	3 years ago
David Benjamin	549e4e7995	Align with upstream on 'close STDOUT' lines. When upstreaming `c1d8c5b0e0` as https://github.com/openssl/openssl/pull/10883 and then https://github.com/openssl/openssl/pull/10930, we ended up diverging slightly: in the upstream version, I ended up applying the same change to the xlate files. Upstream also suggested "error closing STDOUT: $!". Apply the same changes here. Change-Id: I8a8cbc3944432e94a8844f9f628a900edfe77b30 Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/48725 Reviewed-by: Adam Langley <agl@google.com>	4 years ago
Daniel McArdle	13da180506	Optimize suffix building in FileTest::ReadNext(). Updating HPKE to draft-irtf-cfrg-hpke-07 added a number of tests to crypto/hpke/hpke_test_vectors.txt. The time to run HPKE crypto tests increased from 0.09 to 0.56 seconds (averaged over 6 runs). The runtime for the whole crypto_test suite increased from 86.44 to 88.19 (measured once). Profiling revealed an excessive amount of CPU time (~50% for HPKE tests) spent on std::map lookups in ReadNext(). I found a slow loop that computes the suffix for a repeated attribute by hammering a std::map with incremental guesses. This CL adds a std::map<std::string, size_t> for counting repeated attributes, eliminating the need for the loop. This reduces the runtime for HPKE tests from 0.56 to 0.12 seconds (averaged over 6 runs). For the whole crypto_test suite, runtime is reduced from 88.19 to 86.71 seconds (measured once). Change-Id: Ie87f4a7f3edc95d434226d2959dcf09974f0656f Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/44905 Commit-Queue: David Benjamin <davidben@google.com> Reviewed-by: David Benjamin <davidben@google.com>	4 years ago
Adam Langley	62634262d8	Use more efficient std::string::find overload. This reflects an internal LSC cleanup. Change-Id: Ic6d363ab14e0b021a579cdcf0a7a68a9021e2e18 Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/44664 Commit-Queue: Adam Langley <agl@google.com> Commit-Queue: David Benjamin <davidben@google.com> Reviewed-by: David Benjamin <davidben@google.com>	4 years ago
Tamas Petz	a0b49d63fd	aarch64: support BTI and pointer authentication in assembly This change adds optional support for - Armv8.3-A Pointer Authentication (PAuth) and - Armv8.5-A Branch Target Identification (BTI) features to the perl scripts. Both features can be enabled with additional compiler flags. Unless any of these are enabled explicitly there is no code change at all. The extensions are briefly described below. Please read the appropriate chapters of the Arm Architecture Reference Manual for the complete specification. Scope ----- This change only affects generated assembly code. Armv8.3-A Pointer Authentication -------------------------------- Pointer Authentication extension supports the authentication of the contents of registers before they are used for indirect branching or load. PAuth provides a probabilistic method to detect corruption of register values. PAuth signing instructions generate a Pointer Authentication Code (PAC) based on the value of a register, a seed and a key. The generated PAC is inserted into the original value in the register. A PAuth authentication instruction recomputes the PAC, and if it matches the PAC in the register, restores its original value. In case of a mismatch, an architecturally unmapped address is generated instead. With PAuth, mitigation against ROP (Return-oriented Programming) attacks can be implemented. This is achieved by signing the contents of the link-register (LR) before it is pushed to stack. Once LR is popped, it is authenticated. This way a stack corruption which overwrites the LR on the stack is detectable. The PAuth extension adds several new instructions, some of which are not recognized by older hardware. To support a single codebase for both pre Armv8.3-A targets and newer ones, only NOP-space instructions are added by this patch. These instructions are treated as NOPs on hardware which does not support Armv8.3-A. Furthermore, this patch only considers cases where LR is saved to the stack and then restored before branching to its content. There are cases in the code where LR is pushed to stack but it is not used later. We do not address these cases as they are not affected by PAuth. There are two keys available to sign an instruction address: A and B. PACIASP and PACIBSP only differ in the used keys: A and B, respectively. The keys are typically managed by the operating system. To enable generating code for PAuth compile with -mbranch-protection=<mode>: - standard or pac-ret: add PACIASP and AUTIASP, also enables BTI (read below) - pac-ret+b-key: add PACIBSP and AUTIBSP Armv8.5-A Branch Target Identification -------------------------------------- Branch Target Identification features some new instructions which protect the execution of instructions on guarded pages which are not intended branch targets. If Armv8.5-A is supported by the hardware, execution of an instruction changes the value of PSTATE.BTYPE field. If an indirect branch lands on a guarded page the target instruction must be one of the BTI <jc> flavors, or in case of a direct call or jump it can be any other instruction. If the target instruction is not compatible with the value of PSTATE.BTYPE a Branch Target Exception is generated. In short, indirect jumps are compatible with BTI <j> and <jc> while indirect calls are compatible with BTI <c> and <jc>. Please refer to the specification for the details. Armv8.3-A PACIASP and PACIBSP are implicit branch target identification instructions which are equivalent with BTI c or BTI jc depending on system register configuration. BTI is used to mitigate JOP (Jump-oriented Programming) attacks by limiting the set of instructions which can be jumped to. BTI requires active linker support to mark the pages with BTI-enabled code as guarded. For ELF64 files BTI compatibility is recorded in the .note.gnu.property section. For a shared object or static binary it is required that all linked units support BTI. This means that even a single assembly file without the required note section turns-off BTI for the whole binary or shared object. The new BTI instructions are treated as NOPs on hardware which does not support Armv8.5-A or on pages which are not guarded. To insert this new and optional instruction compile with -mbranch-protection=standard (also enables PAuth) or +bti. When targeting a guarded page from a non-guarded page, weaker compatibility restrictions apply to maintain compatibility between legacy and new code. For detailed rules please refer to the Arm ARM. Compiler support ---------------- Compiler support requires understanding '-mbranch-protection=<mode>' and emitting the appropriate feature macros (__ARM_FEATURE_BTI_DEFAULT and __ARM_FEATURE_PAC_DEFAULT). The current state is the following: ------------------------------------------------------- \| Compiler \| -mbranch-protection \| Feature macros \| +----------+---------------------+--------------------+ \| clang \| 9.0.0 \| 11.0.0 \| +----------+---------------------+--------------------+ \| gcc \| 9 \| expected in 10.1+ \| ------------------------------------------------------- Available Platforms ------------------ Arm Fast Model and QEMU support both extensions. https://developer.arm.com/tools-and-software/simulation-models/fast-models https://www.qemu.org/ Implementation Notes -------------------- This change adds BTI landing pads even to assembly functions which are likely to be directly called only. In these cases, landing pads might be superfluous depending on what code the linker generates. Code size and performance impact for these cases would be negligble. Interaction with C code ----------------------- Pointer Authentication is a per-frame protection while Branch Target Identification can be turned on and off only for all code pages of a whole shared object or static binary. Because of these properties if C/C++ code is compiled without any of the above features but assembly files support any of them unconditionally there is no incompatibility between the two. Useful Links ------------ To fully understand the details of both PAuth and BTI it is advised to read the related chapters of the Arm Architecture Reference Manual (Arm ARM): https://developer.arm.com/documentation/ddi0487/latest/ Additional materials: "Providing protection for complex software" https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software Arm Compiler Reference Guide Version 6.14: -mbranch-protection https://developer.arm.com/documentation/101754/0614/armclang-Reference/armclang-Command-line-Options/-mbranch-protection?lang=en Arm C Language Extensions (ACLE) https://developer.arm.com/docs/101028/latest Change-Id: I4335f92e2ccc8e209c7d68a0a79f1acdf3aeb791 Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/42084 Reviewed-by: Adam Langley <agl@google.com> Commit-Queue: Adam Langley <agl@google.com>	5 years ago
Adam Langley	fb0c05cac2	acvp: add CMAC-AES support. Change by Dan Janni. Change-Id: I3f059e7b1a822c6f97128ca92a693499a3f7fa8f Reviewed-on: https://boringssl-review.googlesource.com/c/boringssl/+/41984 Commit-Queue: Adam Langley <agl@google.com> Reviewed-by: David Benjamin <davidben@google.com>	5 years ago