mirror of https://github.com/FFmpeg/FFmpeg.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1174 lines
47 KiB
1174 lines
47 KiB
/* |
|
* VC1 NEON optimisations |
|
* |
|
* Copyright (c) 2010 Rob Clark <rob@ti.com> |
|
* Copyright (c) 2011 Mans Rullgard <mans@mansr.com> |
|
* |
|
* This file is part of Libav. |
|
* |
|
* Libav is free software; you can redistribute it and/or |
|
* modify it under the terms of the GNU Lesser General Public |
|
* License as published by the Free Software Foundation; either |
|
* version 2.1 of the License, or (at your option) any later version. |
|
* |
|
* Libav is distributed in the hope that it will be useful, |
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
|
* Lesser General Public License for more details. |
|
* |
|
* You should have received a copy of the GNU Lesser General Public |
|
* License along with Libav; if not, write to the Free Software |
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
|
*/ |
|
|
|
#include "libavutil/arm/asm.S" |
|
#include "neon.S" |
|
|
|
#include "config.h" |
|
|
|
@ Transpose rows into columns of a matrix of 16-bit elements. For 4x4, pass |
|
@ double-word registers, for 8x4, pass quad-word registers. |
|
.macro transpose16 r0, r1, r2, r3 |
|
@ At this point: |
|
@ row[0] r0 |
|
@ row[1] r1 |
|
@ row[2] r2 |
|
@ row[3] r3 |
|
|
|
vtrn.16 \r0, \r1 @ first and second row |
|
vtrn.16 \r2, \r3 @ third and fourth row |
|
vtrn.32 \r0, \r2 @ first and third row |
|
vtrn.32 \r1, \r3 @ second and fourth row |
|
|
|
@ At this point, if registers are quad-word: |
|
@ column[0] d0 |
|
@ column[1] d2 |
|
@ column[2] d4 |
|
@ column[3] d6 |
|
@ column[4] d1 |
|
@ column[5] d3 |
|
@ column[6] d5 |
|
@ column[7] d7 |
|
|
|
@ At this point, if registers are double-word: |
|
@ column[0] d0 |
|
@ column[1] d1 |
|
@ column[2] d2 |
|
@ column[3] d3 |
|
.endm |
|
|
|
@ ff_vc1_inv_trans_{4,8}x{4,8}_neon and overflow: The input values in the file |
|
@ are supposed to be in a specific range as to allow for 16-bit math without |
|
@ causing overflows, but sometimes the input values are just big enough to |
|
@ barely cause overflow in vadd instructions like: |
|
@ |
|
@ vadd.i16 q0, q8, q10 |
|
@ vshr.s16 q0, q0, #\rshift |
|
@ |
|
@ To prevent these borderline cases from overflowing, we just need one more |
|
@ bit of precision, which is accomplished by replacing the sequence above with: |
|
@ |
|
@ vhadd.s16 q0, q8, q10 |
|
@ vshr.s16 q0, q0, #(\rshift -1) |
|
@ |
|
@ This works because vhadd is a single instruction that adds, then shifts to |
|
@ the right once, all before writing the result to the destination register. |
|
@ |
|
@ Even with this workaround, there were still some files that caused overflows |
|
@ in ff_vc1_inv_trans_8x8_neon. See the comments in ff_vc1_inv_trans_8x8_neon |
|
@ for the additional workaround. |
|
|
|
@ Takes 4 columns of 8 values each and operates on it. Modeled after the first |
|
@ for loop in vc1_inv_trans_4x8_c. |
|
@ Input columns: q0 q1 q2 q3 |
|
@ Output columns: q0 q1 q2 q3 |
|
@ Trashes: r12 q8 q9 q10 q11 q12 q13 |
|
.macro vc1_inv_trans_4x8_helper add rshift |
|
@ Compute temp1, temp2 and setup scalar #17, #22, #10 |
|
vadd.i16 q12, q0, q2 @ temp1 = src[0] + src[2] |
|
movw r12, #17 |
|
vsub.i16 q13, q0, q2 @ temp2 = src[0] - src[2] |
|
movt r12, #22 |
|
vmov.32 d0[0], r12 |
|
movw r12, #10 |
|
vmov.16 d1[0], r12 |
|
|
|
vmov.i16 q8, #\add @ t1 will accumulate here |
|
vmov.i16 q9, #\add @ t2 will accumulate here |
|
|
|
vmul.i16 q10, q1, d0[1] @ t3 = 22 * (src[1]) |
|
vmul.i16 q11, q3, d0[1] @ t4 = 22 * (src[3]) |
|
|
|
vmla.i16 q8, q12, d0[0] @ t1 = 17 * (temp1) + 4 |
|
vmla.i16 q9, q13, d0[0] @ t2 = 17 * (temp2) + 4 |
|
|
|
vmla.i16 q10, q3, d1[0] @ t3 += 10 * src[3] |
|
vmls.i16 q11, q1, d1[0] @ t4 -= 10 * src[1] |
|
|
|
vhadd.s16 q0, q8, q10 @ dst[0] = (t1 + t3) >> 1 |
|
vhsub.s16 q3, q8, q10 @ dst[3] = (t1 - t3) >> 1 |
|
vhsub.s16 q1, q9, q11 @ dst[1] = (t2 - t4) >> 1 |
|
vhadd.s16 q2, q9, q11 @ dst[2] = (t2 + t4) >> 1 |
|
|
|
@ Halving add/sub above already did one shift |
|
vshr.s16 q0, q0, #(\rshift - 1) @ dst[0] >>= (rshift - 1) |
|
vshr.s16 q3, q3, #(\rshift - 1) @ dst[3] >>= (rshift - 1) |
|
vshr.s16 q1, q1, #(\rshift - 1) @ dst[1] >>= (rshift - 1) |
|
vshr.s16 q2, q2, #(\rshift - 1) @ dst[2] >>= (rshift - 1) |
|
.endm |
|
|
|
@ Takes 8 columns of 4 values each and operates on it. Modeled after the second |
|
@ for loop in vc1_inv_trans_4x8_c. |
|
@ Input columns: d0 d2 d4 d6 d1 d3 d5 d7 |
|
@ Output columns: d16 d17 d18 d19 d21 d20 d23 d22 |
|
@ Trashes all NEON registers (and r12) except for: q4 q5 q6 q7 |
|
.macro vc1_inv_trans_8x4_helper add add1beforeshift rshift |
|
@ At this point: |
|
@ src[0] d0 overwritten later |
|
@ src[8] d2 |
|
@ src[16] d4 overwritten later |
|
@ src[24] d6 |
|
@ src[32] d1 overwritten later |
|
@ src[40] d3 |
|
@ src[48] d5 overwritten later |
|
@ src[56] d7 |
|
|
|
movw r12, #12 |
|
vmov.i16 q14, #\add @ t1|t2 will accumulate here |
|
movt r12, #6 |
|
|
|
vadd.i16 d20, d0, d1 @ temp1 = src[0] + src[32] |
|
vsub.i16 d21, d0, d1 @ temp2 = src[0] - src[32] |
|
vmov.i32 d0[0], r12 @ 16-bit: d0[0] = #12, d0[1] = #6 |
|
|
|
vshl.i16 q15, q2, #4 @ t3|t4 = 16 * (src[16]|src[48]) |
|
vswp d4, d5 @ q2 = src[48]|src[16] |
|
vmla.i16 q14, q10, d0[0] @ t1|t2 = 12 * (temp1|temp2) + 64 |
|
movw r12, #15 |
|
movt r12, #9 |
|
vmov.i32 d0[1], r12 @ 16-bit: d0[2] = #15, d0[3] = #9 |
|
vneg.s16 d31, d31 @ t4 = -t4 |
|
vmla.i16 q15, q2, d0[1] @ t3|t4 += 6 * (src[48]|src[16]) |
|
|
|
@ At this point: |
|
@ d0[2] #15 |
|
@ d0[3] #9 |
|
@ q1 src[8]|src[40] |
|
@ q3 src[24]|src[56] |
|
@ q14 old t1|t2 |
|
@ q15 old t3|t4 |
|
|
|
vshl.i16 q8, q1, #4 @ t1|t2 = 16 * (src[8]|src[40]) |
|
vswp d2, d3 @ q1 = src[40]|src[8] |
|
vshl.i16 q12, q3, #4 @ temp3a|temp4a = 16 * src[24]|src[56] |
|
vswp d6, d7 @ q3 = src[56]|src[24] |
|
vshl.i16 q13, q1, #2 @ temp3b|temp4b = 4 * (src[40]|src[8]) |
|
vshl.i16 q2, q3, #2 @ temp1|temp2 = 4 * (src[56]|src[24]) |
|
vswp d3, d6 @ q1 = src[40]|src[56], q3 = src[8]|src[24] |
|
vsub.i16 q9, q13, q12 @ t3|t4 = - (temp3a|temp4a) + (temp3b|temp4b) |
|
vadd.i16 q8, q8, q2 @ t1|t2 += temp1|temp2 |
|
vmul.i16 q12, q3, d0[3] @ temp3|temp4 = 9 * src[8]|src[24] |
|
vmla.i16 q8, q1, d0[3] @ t1|t2 += 9 * (src[40]|src[56]) |
|
vswp d6, d7 @ q3 = src[24]|src[8] |
|
vswp d2, d3 @ q1 = src[56]|src[40] |
|
|
|
vsub.i16 q11, q14, q15 @ t8|t7 = old t1|t2 - old t3|t4 |
|
vadd.i16 q10, q14, q15 @ t5|t6 = old t1|t2 + old t3|t4 |
|
.if \add1beforeshift |
|
vmov.i16 q15, #1 |
|
.endif |
|
|
|
vadd.i16 d18, d18, d24 @ t3 += temp3 |
|
vsub.i16 d19, d19, d25 @ t4 -= temp4 |
|
|
|
vswp d22, d23 @ q11 = t7|t8 |
|
|
|
vneg.s16 d17, d17 @ t2 = -t2 |
|
vmla.i16 q9, q1, d0[2] @ t3|t4 += 15 * src[56]|src[40] |
|
vmla.i16 q8, q3, d0[2] @ t1|t2 += 15 * src[24]|src[8] |
|
|
|
@ At this point: |
|
@ t1 d16 |
|
@ t2 d17 |
|
@ t3 d18 |
|
@ t4 d19 |
|
@ t5 d20 |
|
@ t6 d21 |
|
@ t7 d22 |
|
@ t8 d23 |
|
@ #1 q15 |
|
|
|
.if \add1beforeshift |
|
vadd.i16 q3, q15, q10 @ line[7,6] = t5|t6 + 1 |
|
vadd.i16 q2, q15, q11 @ line[5,4] = t7|t8 + 1 |
|
.endif |
|
|
|
@ Sometimes this overflows, so to get one additional bit of precision, use |
|
@ a single instruction that both adds and shifts right (halving). |
|
vhadd.s16 q1, q9, q11 @ line[2,3] = (t3|t4 + t7|t8) >> 1 |
|
vhadd.s16 q0, q8, q10 @ line[0,1] = (t1|t2 + t5|t6) >> 1 |
|
.if \add1beforeshift |
|
vhsub.s16 q2, q2, q9 @ line[5,4] = (t7|t8 - t3|t4 + 1) >> 1 |
|
vhsub.s16 q3, q3, q8 @ line[7,6] = (t5|t6 - t1|t2 + 1) >> 1 |
|
.else |
|
vhsub.s16 q2, q11, q9 @ line[5,4] = (t7|t8 - t3|t4) >> 1 |
|
vhsub.s16 q3, q10, q8 @ line[7,6] = (t5|t6 - t1|t2) >> 1 |
|
.endif |
|
|
|
vshr.s16 q9, q1, #(\rshift - 1) @ one shift is already done by vhadd/vhsub above |
|
vshr.s16 q8, q0, #(\rshift - 1) |
|
vshr.s16 q10, q2, #(\rshift - 1) |
|
vshr.s16 q11, q3, #(\rshift - 1) |
|
|
|
@ At this point: |
|
@ dst[0] d16 |
|
@ dst[1] d17 |
|
@ dst[2] d18 |
|
@ dst[3] d19 |
|
@ dst[4] d21 |
|
@ dst[5] d20 |
|
@ dst[6] d23 |
|
@ dst[7] d22 |
|
.endm |
|
|
|
@ This is modeled after the first and second for loop in vc1_inv_trans_8x8_c. |
|
@ Input columns: q8, q9, q10, q11, q12, q13, q14, q15 |
|
@ Output columns: q8, q9, q10, q11, q12, q13, q14, q15 |
|
@ Trashes all NEON registers (and r12) except for: q4 q5 q6 q7 |
|
.macro vc1_inv_trans_8x8_helper add add1beforeshift rshift |
|
@ This actually computes half of t1, t2, t3, t4, as explained below |
|
@ near `tNhalf`. |
|
vmov.i16 q0, #(6 / 2) @ q0 = #6/2 |
|
vshl.i16 q1, q10, #3 @ t3 = 16/2 * src[16] |
|
vshl.i16 q3, q14, #3 @ temp4 = 16/2 * src[48] |
|
vmul.i16 q2, q10, q0 @ t4 = 6/2 * src[16] |
|
vmla.i16 q1, q14, q0 @ t3 += 6/2 * src[48] |
|
@ unused: q0, q10, q14 |
|
vmov.i16 q0, #(12 / 2) @ q0 = #12/2 |
|
vadd.i16 q10, q8, q12 @ temp1 = src[0] + src[32] |
|
vsub.i16 q14, q8, q12 @ temp2 = src[0] - src[32] |
|
@ unused: q8, q12 |
|
vmov.i16 q8, #(\add / 2) @ t1 will accumulate here |
|
vmov.i16 q12, #(\add / 2) @ t2 will accumulate here |
|
movw r12, #15 |
|
vsub.i16 q2, q2, q3 @ t4 = 6/2 * src[16] - 16/2 * src[48] |
|
movt r12, #9 |
|
@ unused: q3 |
|
vmla.i16 q8, q10, q0 @ t1 = 12/2 * temp1 + add |
|
vmla.i16 q12, q14, q0 @ t2 = 12/2 * temp2 + add |
|
vmov.i32 d0[0], r12 |
|
@ unused: q3, q10, q14 |
|
|
|
@ At this point: |
|
@ q0 d0=#15|#9 |
|
@ q1 old t3 |
|
@ q2 old t4 |
|
@ q3 |
|
@ q8 old t1 |
|
@ q9 src[8] |
|
@ q10 |
|
@ q11 src[24] |
|
@ q12 old t2 |
|
@ q13 src[40] |
|
@ q14 |
|
@ q15 src[56] |
|
|
|
@ unused: q3, q10, q14 |
|
movw r12, #16 |
|
vshl.i16 q3, q9, #4 @ t1 = 16 * src[8] |
|
movt r12, #4 |
|
vshl.i16 q10, q9, #2 @ t4 = 4 * src[8] |
|
vmov.i32 d1[0], r12 |
|
vmul.i16 q14, q9, d0[0] @ t2 = 15 * src[8] |
|
vmul.i16 q9, q9, d0[1] @ t3 = 9 * src[8] |
|
@ unused: none |
|
vmla.i16 q3, q11, d0[0] @ t1 += 15 * src[24] |
|
vmls.i16 q10, q11, d0[1] @ t4 -= 9 * src[24] |
|
vmls.i16 q14, q11, d1[1] @ t2 -= 4 * src[24] |
|
vmls.i16 q9, q11, d1[0] @ t3 -= 16 * src[24] |
|
@ unused: q11 |
|
vmla.i16 q3, q13, d0[1] @ t1 += 9 * src[40] |
|
vmla.i16 q10, q13, d0[0] @ t4 += 15 * src[40] |
|
vmls.i16 q14, q13, d1[0] @ t2 -= 16 * src[40] |
|
vmla.i16 q9, q13, d1[1] @ t3 += 4 * src[40] |
|
@ unused: q11, q13 |
|
|
|
@ Compute t5, t6, t7, t8 from old t1, t2, t3, t4. Actually, it computes |
|
@ half of t5, t6, t7, t8 since t1, t2, t3, t4 are halved. |
|
vadd.i16 q11, q8, q1 @ t5 = t1 + t3 |
|
vsub.i16 q1, q8, q1 @ t8 = t1 - t3 |
|
vadd.i16 q13, q12, q2 @ t6 = t2 + t4 |
|
vsub.i16 q2, q12, q2 @ t7 = t2 - t4 |
|
@ unused: q8, q12 |
|
|
|
.if \add1beforeshift |
|
vmov.i16 q12, #1 |
|
.endif |
|
|
|
@ unused: q8 |
|
vmla.i16 q3, q15, d1[1] @ t1 += 4 * src[56] |
|
vmls.i16 q14, q15, d0[1] @ t2 -= 9 * src[56] |
|
vmla.i16 q9, q15, d0[0] @ t3 += 15 * src[56] |
|
vmls.i16 q10, q15, d1[0] @ t4 -= 16 * src[56] |
|
@ unused: q0, q8, q15 |
|
|
|
@ At this point: |
|
@ t1 q3 |
|
@ t2 q14 |
|
@ t3 q9 |
|
@ t4 q10 |
|
@ t5half q11 |
|
@ t6half q13 |
|
@ t7half q2 |
|
@ t8half q1 |
|
@ #1 q12 |
|
@ |
|
@ tNhalf is half of the value of tN (as described in vc1_inv_trans_8x8_c). |
|
@ This is done because sometimes files have input that causes tN + tM to |
|
@ overflow. To avoid this overflow, we compute tNhalf, then compute |
|
@ tNhalf + tM (which doesn't overflow), and then we use vhadd to compute |
|
@ (tNhalf + (tNhalf + tM)) >> 1 which does not overflow because it is |
|
@ one instruction. |
|
|
|
@ For each pair of tN and tM, do: |
|
@ lineA = t5half + t1 |
|
@ if add1beforeshift: t1 -= 1 |
|
@ lineA = (t5half + lineA) >> 1 |
|
@ lineB = t5half - t1 |
|
@ lineB = (t5half + lineB) >> 1 |
|
@ lineA >>= rshift - 1 |
|
@ lineB >>= rshift - 1 |
|
|
|
vadd.i16 q8, q11, q3 @ q8 = t5half + t1 |
|
.if \add1beforeshift |
|
vsub.i16 q3, q3, q12 @ q3 = t1 - 1 |
|
.endif |
|
|
|
vadd.i16 q0, q13, q14 @ q0 = t6half + t2 |
|
.if \add1beforeshift |
|
vsub.i16 q14, q14, q12 @ q14 = t2 - 1 |
|
.endif |
|
|
|
vadd.i16 q15, q2, q9 @ q15 = t7half + t3 |
|
.if \add1beforeshift |
|
vsub.i16 q9, q9, q12 @ q9 = t3 - 1 |
|
.endif |
|
@ unused: none |
|
|
|
vhadd.s16 q8, q11, q8 @ q8 = (t5half + t5half + t1) >> 1 |
|
vsub.i16 q3, q11, q3 @ q3 = t5half - t1 + 1 |
|
|
|
vhadd.s16 q0, q13, q0 @ q0 = (t6half + t6half + t2) >> 1 |
|
vsub.i16 q14, q13, q14 @ q14 = t6half - t2 + 1 |
|
|
|
vhadd.s16 q15, q2, q15 @ q15 = (t7half + t7half + t3) >> 1 |
|
vsub.i16 q9, q2, q9 @ q9 = t7half - t3 + 1 |
|
|
|
vhadd.s16 q3, q11, q3 @ q3 = (t5half + t5half - t1 + 1) >> 1 |
|
@ unused: q11 |
|
|
|
vadd.i16 q11, q1, q10 @ q11 = t8half + t4 |
|
.if \add1beforeshift |
|
vsub.i16 q10, q10, q12 @ q10 = t4 - 1 |
|
.endif |
|
@ unused: q12 |
|
|
|
vhadd.s16 q14, q13, q14 @ q14 = (t6half + t6half - t2 + 1) >> 1 |
|
@ unused: q12, q13 |
|
vhadd.s16 q13, q2, q9 @ q9 = (t7half + t7half - t3 + 1) >> 1 |
|
@ unused: q12, q2, q9 |
|
|
|
vsub.i16 q10, q1, q10 @ q10 = t8half - t4 + 1 |
|
vhadd.s16 q11, q1, q11 @ q11 = (t8half + t8half + t4) >> 1 |
|
|
|
vshr.s16 q8, q8, #(\rshift - 1) @ q8 = line[0] |
|
vhadd.s16 q12, q1, q10 @ q12 = (t8half + t8half - t4 + 1) >> 1 |
|
vshr.s16 q9, q0, #(\rshift - 1) @ q9 = line[1] |
|
vshr.s16 q10, q15, #(\rshift - 1) @ q10 = line[2] |
|
vshr.s16 q11, q11, #(\rshift - 1) @ q11 = line[3] |
|
vshr.s16 q12, q12, #(\rshift - 1) @ q12 = line[4] |
|
vshr.s16 q13, q13, #(\rshift - 1) @ q13 = line[5] |
|
vshr.s16 q14, q14, #(\rshift - 1) @ q14 = line[6] |
|
vshr.s16 q15, q3, #(\rshift - 1) @ q15 = line[7] |
|
.endm |
|
|
|
@ (int16_t *block [r0]) |
|
function ff_vc1_inv_trans_8x8_neon, export=1 |
|
vld1.64 {q8-q9}, [r0,:128]! |
|
vld1.64 {q10-q11}, [r0,:128]! |
|
vld1.64 {q12-q13}, [r0,:128]! |
|
vld1.64 {q14-q15}, [r0,:128] |
|
sub r0, r0, #(16 * 2 * 3) @ restore r0 |
|
|
|
@ At this point: |
|
@ src[0] q8 |
|
@ src[8] q9 |
|
@ src[16] q10 |
|
@ src[24] q11 |
|
@ src[32] q12 |
|
@ src[40] q13 |
|
@ src[48] q14 |
|
@ src[56] q15 |
|
|
|
vc1_inv_trans_8x8_helper add=4 add1beforeshift=0 rshift=3 |
|
|
|
@ Transpose result matrix of 8x8 |
|
swap4 d17, d19, d21, d23, d24, d26, d28, d30 |
|
transpose16_4x4 q8, q9, q10, q11, q12, q13, q14, q15 |
|
|
|
vc1_inv_trans_8x8_helper add=64 add1beforeshift=1 rshift=7 |
|
|
|
vst1.64 {q8-q9}, [r0,:128]! |
|
vst1.64 {q10-q11}, [r0,:128]! |
|
vst1.64 {q12-q13}, [r0,:128]! |
|
vst1.64 {q14-q15}, [r0,:128] |
|
|
|
bx lr |
|
endfunc |
|
|
|
@ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) |
|
function ff_vc1_inv_trans_8x4_neon, export=1 |
|
vld1.64 {q0-q1}, [r2,:128]! @ load 8 * 4 * 2 = 64 bytes / 16 bytes per quad = 4 quad registers |
|
vld1.64 {q2-q3}, [r2,:128] |
|
|
|
transpose16 q0 q1 q2 q3 @ transpose rows to columns |
|
|
|
@ At this point: |
|
@ src[0] d0 |
|
@ src[1] d2 |
|
@ src[2] d4 |
|
@ src[3] d6 |
|
@ src[4] d1 |
|
@ src[5] d3 |
|
@ src[6] d5 |
|
@ src[7] d7 |
|
|
|
vc1_inv_trans_8x4_helper add=4 add1beforeshift=0 rshift=3 |
|
|
|
@ Move output to more standardized registers |
|
vmov d0, d16 |
|
vmov d2, d17 |
|
vmov d4, d18 |
|
vmov d6, d19 |
|
vmov d1, d21 |
|
vmov d3, d20 |
|
vmov d5, d23 |
|
vmov d7, d22 |
|
|
|
@ At this point: |
|
@ dst[0] d0 |
|
@ dst[1] d2 |
|
@ dst[2] d4 |
|
@ dst[3] d6 |
|
@ dst[4] d1 |
|
@ dst[5] d3 |
|
@ dst[6] d5 |
|
@ dst[7] d7 |
|
|
|
transpose16 q0 q1 q2 q3 @ turn columns into rows |
|
|
|
@ At this point: |
|
@ row[0] q0 |
|
@ row[1] q1 |
|
@ row[2] q2 |
|
@ row[3] q3 |
|
|
|
vc1_inv_trans_4x8_helper add=64 rshift=7 |
|
|
|
@ At this point: |
|
@ line[0].l d0 |
|
@ line[0].h d1 |
|
@ line[1].l d2 |
|
@ line[1].h d3 |
|
@ line[2].l d4 |
|
@ line[2].h d5 |
|
@ line[3].l d6 |
|
@ line[3].h d7 |
|
|
|
@ unused registers: q12, q13, q14, q15 |
|
|
|
vld1.64 {d28}, [r0,:64], r1 @ read dest |
|
vld1.64 {d29}, [r0,:64], r1 |
|
vld1.64 {d30}, [r0,:64], r1 |
|
vld1.64 {d31}, [r0,:64], r1 |
|
sub r0, r0, r1, lsl #2 @ restore original r0 value |
|
|
|
vaddw.u8 q0, q0, d28 @ line[0] += dest[0] |
|
vaddw.u8 q1, q1, d29 @ line[1] += dest[1] |
|
vaddw.u8 q2, q2, d30 @ line[2] += dest[2] |
|
vaddw.u8 q3, q3, d31 @ line[3] += dest[3] |
|
|
|
vqmovun.s16 d0, q0 @ line[0] |
|
vqmovun.s16 d1, q1 @ line[1] |
|
vqmovun.s16 d2, q2 @ line[2] |
|
vqmovun.s16 d3, q3 @ line[3] |
|
|
|
vst1.64 {d0}, [r0,:64], r1 @ write dest |
|
vst1.64 {d1}, [r0,:64], r1 |
|
vst1.64 {d2}, [r0,:64], r1 |
|
vst1.64 {d3}, [r0,:64] |
|
|
|
bx lr |
|
endfunc |
|
|
|
@ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) |
|
function ff_vc1_inv_trans_4x8_neon, export=1 |
|
mov r12, #(8 * 2) @ 8 elements per line, each element 2 bytes |
|
vld4.16 {d0[], d2[], d4[], d6[]}, [r2,:64], r12 @ read each column into a q register |
|
vld4.16 {d0[1], d2[1], d4[1], d6[1]}, [r2,:64], r12 |
|
vld4.16 {d0[2], d2[2], d4[2], d6[2]}, [r2,:64], r12 |
|
vld4.16 {d0[3], d2[3], d4[3], d6[3]}, [r2,:64], r12 |
|
vld4.16 {d1[], d3[], d5[], d7[]}, [r2,:64], r12 |
|
vld4.16 {d1[1], d3[1], d5[1], d7[1]}, [r2,:64], r12 |
|
vld4.16 {d1[2], d3[2], d5[2], d7[2]}, [r2,:64], r12 |
|
vld4.16 {d1[3], d3[3], d5[3], d7[3]}, [r2,:64] |
|
|
|
vc1_inv_trans_4x8_helper add=4 rshift=3 |
|
|
|
@ At this point: |
|
@ dst[0] = q0 |
|
@ dst[1] = q1 |
|
@ dst[2] = q2 |
|
@ dst[3] = q3 |
|
|
|
transpose16 q0 q1 q2 q3 @ Transpose rows (registers) into columns |
|
|
|
vc1_inv_trans_8x4_helper add=64 add1beforeshift=1 rshift=7 |
|
|
|
vld1.32 {d28[]}, [r0,:32], r1 @ read dest |
|
vld1.32 {d28[1]}, [r0,:32], r1 |
|
vld1.32 {d29[]}, [r0,:32], r1 |
|
vld1.32 {d29[1]}, [r0,:32], r1 |
|
|
|
vld1.32 {d30[]}, [r0,:32], r1 |
|
vld1.32 {d30[0]}, [r0,:32], r1 |
|
vld1.32 {d31[]}, [r0,:32], r1 |
|
vld1.32 {d31[0]}, [r0,:32], r1 |
|
sub r0, r0, r1, lsl #3 @ restore original r0 value |
|
|
|
vaddw.u8 q8, q8, d28 @ line[0,1] += dest[0,1] |
|
vaddw.u8 q9, q9, d29 @ line[2,3] += dest[2,3] |
|
vaddw.u8 q10, q10, d30 @ line[5,4] += dest[5,4] |
|
vaddw.u8 q11, q11, d31 @ line[7,6] += dest[7,6] |
|
|
|
vqmovun.s16 d16, q8 @ clip(line[0,1]) |
|
vqmovun.s16 d18, q9 @ clip(line[2,3]) |
|
vqmovun.s16 d20, q10 @ clip(line[5,4]) |
|
vqmovun.s16 d22, q11 @ clip(line[7,6]) |
|
|
|
vst1.32 {d16[0]}, [r0,:32], r1 @ write dest |
|
vst1.32 {d16[1]}, [r0,:32], r1 |
|
vst1.32 {d18[0]}, [r0,:32], r1 |
|
vst1.32 {d18[1]}, [r0,:32], r1 |
|
|
|
vst1.32 {d20[1]}, [r0,:32], r1 |
|
vst1.32 {d20[0]}, [r0,:32], r1 |
|
vst1.32 {d22[1]}, [r0,:32], r1 |
|
vst1.32 {d22[0]}, [r0,:32] |
|
|
|
bx lr |
|
endfunc |
|
|
|
@ Setup constants in registers which are used by vc1_inv_trans_4x4_helper |
|
.macro vc1_inv_trans_4x4_helper_setup |
|
vmov.i16 q13, #17 |
|
vmov.i16 q14, #22 |
|
vmov.i16 d30, #10 @ only need double-word, not quad-word |
|
.endm |
|
|
|
@ This is modeled after the first for loop in vc1_inv_trans_4x4_c. |
|
.macro vc1_inv_trans_4x4_helper add rshift |
|
vmov.i16 q2, #\add @ t1|t2 will accumulate here |
|
|
|
vadd.i16 d16, d0, d1 @ temp1 = src[0] + src[2] |
|
vsub.i16 d17, d0, d1 @ temp2 = src[0] - src[2] |
|
vmul.i16 q3, q14, q1 @ t3|t4 = 22 * (src[1]|src[3]) |
|
vmla.i16 q2, q13, q8 @ t1|t2 = 17 * (temp1|temp2) + add |
|
vmla.i16 d6, d30, d3 @ t3 += 10 * src[3] |
|
vmls.i16 d7, d30, d2 @ t4 -= 10 * src[1] |
|
|
|
vadd.i16 q0, q2, q3 @ dst[0,2] = (t1|t2 + t3|t4) |
|
vsub.i16 q1, q2, q3 @ dst[3,1] = (t1|t2 - t3|t4) |
|
vshr.s16 q0, q0, #\rshift @ dst[0,2] >>= rshift |
|
vshr.s16 q1, q1, #\rshift @ dst[3,1] >>= rshift |
|
.endm |
|
|
|
@ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) |
|
function ff_vc1_inv_trans_4x4_neon, export=1 |
|
mov r12, #(8 * 2) @ 8 elements per line, each element 2 bytes |
|
vld4.16 {d0[], d1[], d2[], d3[]}, [r2,:64], r12 @ read each column into a register |
|
vld4.16 {d0[1], d1[1], d2[1], d3[1]}, [r2,:64], r12 |
|
vld4.16 {d0[2], d1[2], d2[2], d3[2]}, [r2,:64], r12 |
|
vld4.16 {d0[3], d1[3], d2[3], d3[3]}, [r2,:64] |
|
|
|
vswp d1, d2 @ so that we can later access column 1 and column 3 as a single q1 register |
|
|
|
vc1_inv_trans_4x4_helper_setup |
|
|
|
@ At this point: |
|
@ src[0] = d0 |
|
@ src[1] = d2 |
|
@ src[2] = d1 |
|
@ src[3] = d3 |
|
|
|
vc1_inv_trans_4x4_helper add=4 rshift=3 @ compute t1, t2, t3, t4 and combine them into dst[0-3] |
|
|
|
@ At this point: |
|
@ dst[0] = d0 |
|
@ dst[1] = d3 |
|
@ dst[2] = d1 |
|
@ dst[3] = d2 |
|
|
|
transpose16 d0 d3 d1 d2 @ Transpose rows (registers) into columns |
|
|
|
@ At this point: |
|
@ src[0] = d0 |
|
@ src[8] = d3 |
|
@ src[16] = d1 |
|
@ src[24] = d2 |
|
|
|
vswp d2, d3 @ so that we can later access column 1 and column 3 in order as a single q1 register |
|
|
|
@ At this point: |
|
@ src[0] = d0 |
|
@ src[8] = d2 |
|
@ src[16] = d1 |
|
@ src[24] = d3 |
|
|
|
vc1_inv_trans_4x4_helper add=64 rshift=7 @ compute t1, t2, t3, t4 and combine them into dst[0-3] |
|
|
|
@ At this point: |
|
@ line[0] = d0 |
|
@ line[1] = d3 |
|
@ line[2] = d1 |
|
@ line[3] = d2 |
|
|
|
vld1.32 {d18[]}, [r0,:32], r1 @ read dest |
|
vld1.32 {d19[]}, [r0,:32], r1 |
|
vld1.32 {d18[1]}, [r0,:32], r1 |
|
vld1.32 {d19[0]}, [r0,:32], r1 |
|
sub r0, r0, r1, lsl #2 @ restore original r0 value |
|
|
|
vaddw.u8 q0, q0, d18 @ line[0,2] += dest[0,2] |
|
vaddw.u8 q1, q1, d19 @ line[3,1] += dest[3,1] |
|
|
|
vqmovun.s16 d0, q0 @ clip(line[0,2]) |
|
vqmovun.s16 d1, q1 @ clip(line[3,1]) |
|
|
|
vst1.32 {d0[0]}, [r0,:32], r1 @ write dest |
|
vst1.32 {d1[1]}, [r0,:32], r1 |
|
vst1.32 {d0[1]}, [r0,:32], r1 |
|
vst1.32 {d1[0]}, [r0,:32] |
|
|
|
bx lr |
|
endfunc |
|
|
|
#if HAVE_AS_DN_DIRECTIVE |
|
@ The absolute value of multiplication constants from vc1_mspel_filter and vc1_mspel_{ver,hor}_filter_16bits. |
|
@ The sign is embedded in the code below that carries out the multiplication (mspel_filter{,.16}). |
|
#define MSPEL_MODE_1_MUL_CONSTANTS 4 53 18 3 |
|
#define MSPEL_MODE_2_MUL_CONSTANTS 1 9 9 1 |
|
#define MSPEL_MODE_3_MUL_CONSTANTS 3 18 53 4 |
|
|
|
@ These constants are from reading the source code of vc1_mspel_mc and determining the value that |
|
@ is added to `rnd` to result in the variable `r`, and the value of the variable `shift`. |
|
#define MSPEL_MODES_11_ADDSHIFT_CONSTANTS 15 5 |
|
#define MSPEL_MODES_12_ADDSHIFT_CONSTANTS 3 3 |
|
#define MSPEL_MODES_13_ADDSHIFT_CONSTANTS 15 5 |
|
#define MSPEL_MODES_21_ADDSHIFT_CONSTANTS MSPEL_MODES_12_ADDSHIFT_CONSTANTS |
|
#define MSPEL_MODES_22_ADDSHIFT_CONSTANTS 0 1 |
|
#define MSPEL_MODES_23_ADDSHIFT_CONSTANTS 3 3 |
|
#define MSPEL_MODES_31_ADDSHIFT_CONSTANTS MSPEL_MODES_13_ADDSHIFT_CONSTANTS |
|
#define MSPEL_MODES_32_ADDSHIFT_CONSTANTS MSPEL_MODES_23_ADDSHIFT_CONSTANTS |
|
#define MSPEL_MODES_33_ADDSHIFT_CONSTANTS 15 5 |
|
|
|
@ The addition and shift constants from vc1_mspel_filter. |
|
#define MSPEL_MODE_1_ADDSHIFT_CONSTANTS 32 6 |
|
#define MSPEL_MODE_2_ADDSHIFT_CONSTANTS 8 4 |
|
#define MSPEL_MODE_3_ADDSHIFT_CONSTANTS 32 6 |
|
|
|
@ Setup constants in registers for a subsequent use of mspel_filter{,.16}. |
|
.macro mspel_constants typesize reg_a reg_b reg_c reg_d filter_a filter_b filter_c filter_d reg_add filter_add_register |
|
@ Define double-word register aliases. Typesize should be i8 or i16. |
|
ra .dn \reg_a\().\typesize |
|
rb .dn \reg_b\().\typesize |
|
rc .dn \reg_c\().\typesize |
|
rd .dn \reg_d\().\typesize |
|
|
|
@ Only set the register if the value is not 1 and unique |
|
.if \filter_a != 1 |
|
vmov ra, #\filter_a @ ra = filter_a |
|
.endif |
|
vmov rb, #\filter_b @ rb = filter_b |
|
.if \filter_b != \filter_c |
|
vmov rc, #\filter_c @ rc = filter_c |
|
.endif |
|
.if \filter_d != 1 |
|
vmov rd, #\filter_d @ rd = filter_d |
|
.endif |
|
@ vdup to double the size of typesize |
|
.ifc \typesize,i8 |
|
vdup.16 \reg_add, \filter_add_register @ reg_add = filter_add_register |
|
.else |
|
vdup.32 \reg_add, \filter_add_register @ reg_add = filter_add_register |
|
.endif |
|
|
|
.unreq ra |
|
.unreq rb |
|
.unreq rc |
|
.unreq rd |
|
.endm |
|
|
|
@ After mspel_constants has been used, do the filtering. |
|
.macro mspel_filter acc dest src0 src1 src2 src3 filter_a filter_b filter_c filter_d reg_a reg_b reg_c reg_d reg_add filter_shift narrow=1 |
|
.if \filter_a != 1 |
|
@ If filter_a != 1, then we need a move and subtract instruction |
|
vmov \acc, \reg_add @ acc = reg_add |
|
vmlsl.u8 \acc, \reg_a, \src0 @ acc -= filter_a * src[-stride] |
|
.else |
|
@ If filter_a is 1, then just subtract without an extra move |
|
vsubw.u8 \acc, \reg_add, \src0 @ acc = reg_add - src[-stride] @ since filter_a == 1 |
|
.endif |
|
vmlal.u8 \acc, \reg_b, \src1 @ acc += filter_b * src[0] |
|
.if \filter_b != \filter_c |
|
vmlal.u8 \acc, \reg_c, \src2 @ acc += filter_c * src[stride] |
|
.else |
|
@ If filter_b is the same as filter_c, use the same reg_b register |
|
vmlal.u8 \acc, \reg_b, \src2 @ acc += filter_c * src[stride] @ where filter_c == filter_b |
|
.endif |
|
.if \filter_d != 1 |
|
@ If filter_d != 1, then do a multiply accumulate |
|
vmlsl.u8 \acc, \reg_d, \src3 @ acc -= filter_d * src[stride * 2] |
|
.else |
|
@ If filter_d is 1, then just do a subtract |
|
vsubw.u8 \acc, \acc, \src3 @ acc -= src[stride * 2] @ since filter_d == 1 |
|
.endif |
|
.if \narrow |
|
vqshrun.s16 \dest, \acc, #\filter_shift @ dest = clip_uint8(acc >> filter_shift) |
|
.else |
|
vshr.s16 \dest, \acc, #\filter_shift @ dest = acc >> filter_shift |
|
.endif |
|
.endm |
|
|
|
@ This is similar to mspel_filter, but the input is 16-bit instead of 8-bit and narrow=0 is not supported. |
|
.macro mspel_filter.16 acc0 acc1 acc0_0 acc0_1 dest src0 src1 src2 src3 src4 src5 src6 src7 filter_a filter_b filter_c filter_d reg_a reg_b reg_c reg_d reg_add filter_shift |
|
.if \filter_a != 1 |
|
vmov \acc0, \reg_add |
|
vmov \acc1, \reg_add |
|
vmlsl.s16 \acc0, \reg_a, \src0 |
|
vmlsl.s16 \acc1, \reg_a, \src1 |
|
.else |
|
vsubw.s16 \acc0, \reg_add, \src0 |
|
vsubw.s16 \acc1, \reg_add, \src1 |
|
.endif |
|
vmlal.s16 \acc0, \reg_b, \src2 |
|
vmlal.s16 \acc1, \reg_b, \src3 |
|
.if \filter_b != \filter_c |
|
vmlal.s16 \acc0, \reg_c, \src4 |
|
vmlal.s16 \acc1, \reg_c, \src5 |
|
.else |
|
vmlal.s16 \acc0, \reg_b, \src4 |
|
vmlal.s16 \acc1, \reg_b, \src5 |
|
.endif |
|
.if \filter_d != 1 |
|
vmlsl.s16 \acc0, \reg_d, \src6 |
|
vmlsl.s16 \acc1, \reg_d, \src7 |
|
.else |
|
vsubw.s16 \acc0, \acc0, \src6 |
|
vsubw.s16 \acc1, \acc1, \src7 |
|
.endif |
|
@ Use acc0_0 and acc0_1 as temp space |
|
vqshrun.s32 \acc0_0, \acc0, #\filter_shift @ Shift and narrow with saturation from s32 to u16 |
|
vqshrun.s32 \acc0_1, \acc1, #\filter_shift |
|
vqmovn.u16 \dest, \acc0 @ Narrow with saturation from u16 to u8 |
|
.endm |
|
|
|
@ Register usage for put_vc1_mspel_mc functions. Registers marked 'hv' are only used in put_vc1_mspel_mc_hv. |
|
@ |
|
@ r0 adjusted dst |
|
@ r1 adjusted src |
|
@ r2 stride |
|
@ r3 adjusted rnd |
|
@ r4 [hv] tmp |
|
@ r11 [hv] sp saved |
|
@ r12 loop counter |
|
@ d0 src[-stride] |
|
@ d1 src[0] |
|
@ d2 src[stride] |
|
@ d3 src[stride * 2] |
|
@ q0 [hv] src[-stride] |
|
@ q1 [hv] src[0] |
|
@ q2 [hv] src[stride] |
|
@ q3 [hv] src[stride * 2] |
|
@ d21 often result from mspel_filter |
|
@ q11 accumulator 0 |
|
@ q12 [hv] accumulator 1 |
|
@ q13 accumulator initial value |
|
@ d28 filter_a |
|
@ d29 filter_b |
|
@ d30 filter_c |
|
@ d31 filter_d |
|
|
|
@ (uint8_t *dst [r0], const uint8_t *src [r1], ptrdiff_t stride [r2], int rnd [r3]) |
|
.macro put_vc1_mspel_mc_hv hmode vmode filter_h_a filter_h_b filter_h_c filter_h_d filter_v_a filter_v_b filter_v_c filter_v_d filter_add filter_shift |
|
function ff_put_vc1_mspel_mc\hmode\()\vmode\()_neon, export=1 |
|
push {r4, r11, lr} |
|
mov r11, sp @ r11 = stack pointer before realignmnet |
|
A bic sp, sp, #15 @ sp = round down to multiple of 16 bytes |
|
T bic r4, r11, #15 |
|
T mov sp, r4 |
|
sub sp, sp, #(8*2*16) @ make space for 8 rows * 2 byte per element * 16 elements per row (to fit 11 actual elements per row) |
|
mov r4, sp @ r4 = int16_t tmp[8 * 16] |
|
|
|
sub r1, r1, #1 @ src -= 1 |
|
.if \filter_add != 0 |
|
add r3, r3, #\filter_add @ r3 = filter_add + rnd |
|
.endif |
|
mov r12, #8 @ loop counter |
|
sub r1, r1, r2 @ r1 = &src[-stride] @ slide back |
|
|
|
@ Do vertical filtering from src into tmp |
|
mspel_constants i8 d28 d29 d30 d31 \filter_v_a \filter_v_b \filter_v_c \filter_v_d q13 r3 |
|
|
|
vld1.64 {d0,d1}, [r1], r2 |
|
vld1.64 {d2,d3}, [r1], r2 |
|
vld1.64 {d4,d5}, [r1], r2 |
|
|
|
1: |
|
subs r12, r12, #4 |
|
|
|
vld1.64 {d6,d7}, [r1], r2 |
|
mspel_filter q11 q11 d0 d2 d4 d6 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
mspel_filter q12 q12 d1 d3 d5 d7 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
vst1.64 {q11,q12}, [r4,:128]! @ store and increment |
|
|
|
vld1.64 {d0,d1}, [r1], r2 |
|
mspel_filter q11 q11 d2 d4 d6 d0 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
mspel_filter q12 q12 d3 d5 d7 d1 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
vst1.64 {q11,q12}, [r4,:128]! @ store and increment |
|
|
|
vld1.64 {d2,d3}, [r1], r2 |
|
mspel_filter q11 q11 d4 d6 d0 d2 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
mspel_filter q12 q12 d5 d7 d1 d3 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
vst1.64 {q11,q12}, [r4,:128]! @ store and increment |
|
|
|
vld1.64 {d4,d5}, [r1], r2 |
|
mspel_filter q11 q11 d6 d0 d2 d4 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
mspel_filter q12 q12 d7 d1 d3 d5 \filter_v_a \filter_v_b \filter_v_c \filter_v_d d28 d29 d30 d31 q13 \filter_shift narrow=0 |
|
vst1.64 {q11,q12}, [r4,:128]! @ store and increment |
|
|
|
bne 1b |
|
|
|
rsb r3, r3, #(64 + \filter_add) @ r3 = (64 + filter_add) - r3 |
|
mov r12, #8 @ loop counter |
|
mov r4, sp @ r4 = tmp |
|
|
|
@ Do horizontal filtering from temp to dst |
|
mspel_constants i16 d28 d29 d30 d31 \filter_h_a \filter_h_b \filter_h_c \filter_h_d q13 r3 |
|
|
|
2: |
|
subs r12, r12, #1 |
|
|
|
vld1.64 {q0,q1}, [r4,:128]! @ read one line of tmp |
|
vext.16 q2, q0, q1, #2 |
|
vext.16 q3, q0, q1, #3 |
|
vext.16 q1, q0, q1, #1 @ do last because it writes to q1 which is read by the other vext instructions |
|
|
|
mspel_filter.16 q11 q12 d22 d23 d21 d0 d1 d2 d3 d4 d5 d6 d7 \filter_h_a \filter_h_b \filter_h_c \filter_h_d d28 d29 d30 d31 q13 7 |
|
|
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
bne 2b |
|
|
|
mov sp, r11 |
|
pop {r4, r11, pc} |
|
endfunc |
|
.endm |
|
|
|
@ Use C preprocessor and assembler macros to expand to functions for horizontal and vertical filtering. |
|
#define PUT_VC1_MSPEL_MC_HV(hmode, vmode) \ |
|
put_vc1_mspel_mc_hv hmode vmode \ |
|
MSPEL_MODE_ ## hmode ## _MUL_CONSTANTS \ |
|
MSPEL_MODE_ ## vmode ## _MUL_CONSTANTS \ |
|
MSPEL_MODES_ ## hmode ## vmode ## _ADDSHIFT_CONSTANTS |
|
|
|
PUT_VC1_MSPEL_MC_HV(1, 1) |
|
PUT_VC1_MSPEL_MC_HV(1, 2) |
|
PUT_VC1_MSPEL_MC_HV(1, 3) |
|
PUT_VC1_MSPEL_MC_HV(2, 1) |
|
PUT_VC1_MSPEL_MC_HV(2, 2) |
|
PUT_VC1_MSPEL_MC_HV(2, 3) |
|
PUT_VC1_MSPEL_MC_HV(3, 1) |
|
PUT_VC1_MSPEL_MC_HV(3, 2) |
|
PUT_VC1_MSPEL_MC_HV(3, 3) |
|
|
|
#undef PUT_VC1_MSPEL_MC_HV |
|
|
|
.macro put_vc1_mspel_mc_h_only hmode filter_a filter_b filter_c filter_d filter_add filter_shift |
|
function ff_put_vc1_mspel_mc\hmode\()0_neon, export=1 |
|
rsb r3, r3, #\filter_add @ r3 = filter_add - r = filter_add - rnd |
|
mov r12, #8 @ loop counter |
|
sub r1, r1, #1 @ slide back, using immediate |
|
|
|
mspel_constants i8 d28 d29 d30 d31 \filter_a \filter_b \filter_c \filter_d q13 r3 |
|
|
|
1: |
|
subs r12, r12, #1 |
|
|
|
vld1.64 {d0,d1}, [r1], r2 @ read 16 bytes even though we only need 11, also src += stride |
|
vext.8 d2, d0, d1, #2 |
|
vext.8 d3, d0, d1, #3 |
|
vext.8 d1, d0, d1, #1 @ do last because it writes to d1 which is read by the other vext instructions |
|
|
|
mspel_filter q11 d21 d0 d1 d2 d3 \filter_a \filter_b \filter_c \filter_d d28 d29 d30 d31 q13 \filter_shift |
|
|
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
bne 1b |
|
|
|
bx lr |
|
endfunc |
|
.endm |
|
|
|
@ Use C preprocessor and assembler macros to expand to functions for horizontal only filtering. |
|
#define PUT_VC1_MSPEL_MC_H_ONLY(hmode) \ |
|
put_vc1_mspel_mc_h_only hmode MSPEL_MODE_ ## hmode ## _MUL_CONSTANTS MSPEL_MODE_ ## hmode ## _ADDSHIFT_CONSTANTS |
|
|
|
PUT_VC1_MSPEL_MC_H_ONLY(1) |
|
PUT_VC1_MSPEL_MC_H_ONLY(2) |
|
PUT_VC1_MSPEL_MC_H_ONLY(3) |
|
|
|
#undef PUT_VC1_MSPEL_MC_H_ONLY |
|
|
|
@ (uint8_t *dst [r0], const uint8_t *src [r1], ptrdiff_t stride [r2], int rnd [r3]) |
|
.macro put_vc1_mspel_mc_v_only vmode filter_a filter_b filter_c filter_d filter_add filter_shift |
|
function ff_put_vc1_mspel_mc0\vmode\()_neon, export=1 |
|
add r3, r3, #\filter_add - 1 @ r3 = filter_add - r = filter_add - (1 - rnd) = filter_add - 1 + rnd |
|
mov r12, #8 @ loop counter |
|
sub r1, r1, r2 @ r1 = &src[-stride] @ slide back |
|
|
|
mspel_constants i8 d28 d29 d30 d31 \filter_a \filter_b \filter_c \filter_d q13 r3 |
|
|
|
vld1.64 {d0}, [r1], r2 @ d0 = src[-stride] |
|
vld1.64 {d1}, [r1], r2 @ d1 = src[0] |
|
vld1.64 {d2}, [r1], r2 @ d2 = src[stride] |
|
|
|
1: |
|
subs r12, r12, #4 |
|
|
|
vld1.64 {d3}, [r1], r2 @ d3 = src[stride * 2] |
|
mspel_filter q11 d21 d0 d1 d2 d3 \filter_a \filter_b \filter_c \filter_d d28 d29 d30 d31 q13 \filter_shift |
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
vld1.64 {d0}, [r1], r2 @ d0 = next line |
|
mspel_filter q11 d21 d1 d2 d3 d0 \filter_a \filter_b \filter_c \filter_d d28 d29 d30 d31 q13 \filter_shift |
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
vld1.64 {d1}, [r1], r2 @ d1 = next line |
|
mspel_filter q11 d21 d2 d3 d0 d1 \filter_a \filter_b \filter_c \filter_d d28 d29 d30 d31 q13 \filter_shift |
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
vld1.64 {d2}, [r1], r2 @ d2 = next line |
|
mspel_filter q11 d21 d3 d0 d1 d2 \filter_a \filter_b \filter_c \filter_d d28 d29 d30 d31 q13 \filter_shift |
|
vst1.64 {d21}, [r0,:64], r2 @ store and increment dst |
|
|
|
bne 1b |
|
|
|
bx lr |
|
endfunc |
|
.endm |
|
|
|
@ Use C preprocessor and assembler macros to expand to functions for vertical only filtering. |
|
#define PUT_VC1_MSPEL_MC_V_ONLY(vmode) \ |
|
put_vc1_mspel_mc_v_only vmode MSPEL_MODE_ ## vmode ## _MUL_CONSTANTS MSPEL_MODE_ ## vmode ## _ADDSHIFT_CONSTANTS |
|
|
|
PUT_VC1_MSPEL_MC_V_ONLY(1) |
|
PUT_VC1_MSPEL_MC_V_ONLY(2) |
|
PUT_VC1_MSPEL_MC_V_ONLY(3) |
|
|
|
#undef PUT_VC1_MSPEL_MC_V_ONLY |
|
#endif |
|
|
|
function ff_put_pixels8x8_neon, export=1 |
|
vld1.64 {d0}, [r1], r2 |
|
vld1.64 {d1}, [r1], r2 |
|
vld1.64 {d2}, [r1], r2 |
|
vld1.64 {d3}, [r1], r2 |
|
vld1.64 {d4}, [r1], r2 |
|
vld1.64 {d5}, [r1], r2 |
|
vld1.64 {d6}, [r1], r2 |
|
vld1.64 {d7}, [r1] |
|
vst1.64 {d0}, [r0,:64], r2 |
|
vst1.64 {d1}, [r0,:64], r2 |
|
vst1.64 {d2}, [r0,:64], r2 |
|
vst1.64 {d3}, [r0,:64], r2 |
|
vst1.64 {d4}, [r0,:64], r2 |
|
vst1.64 {d5}, [r0,:64], r2 |
|
vst1.64 {d6}, [r0,:64], r2 |
|
vst1.64 {d7}, [r0,:64] |
|
bx lr |
|
endfunc |
|
|
|
function ff_vc1_inv_trans_8x8_dc_neon, export=1 |
|
ldrsh r2, [r2] @ int dc = block[0]; |
|
|
|
vld1.64 {d0}, [r0,:64], r1 |
|
vld1.64 {d1}, [r0,:64], r1 |
|
vld1.64 {d4}, [r0,:64], r1 |
|
vld1.64 {d5}, [r0,:64], r1 |
|
|
|
add r2, r2, r2, lsl #1 @ dc = (3 * dc + 1) >> 1; |
|
vld1.64 {d6}, [r0,:64], r1 |
|
add r2, r2, #1 |
|
vld1.64 {d7}, [r0,:64], r1 |
|
vld1.64 {d16}, [r0,:64], r1 |
|
vld1.64 {d17}, [r0,:64], r1 |
|
asr r2, r2, #1 |
|
|
|
sub r0, r0, r1, lsl #3 @ restore r0 to original value |
|
|
|
add r2, r2, r2, lsl #1 @ dc = (3 * dc + 16) >> 5; |
|
add r2, r2, #16 |
|
asr r2, r2, #5 |
|
|
|
vdup.16 q1, r2 @ dc |
|
|
|
vaddw.u8 q9, q1, d0 |
|
vaddw.u8 q10, q1, d1 |
|
vaddw.u8 q11, q1, d4 |
|
vaddw.u8 q12, q1, d5 |
|
vqmovun.s16 d0, q9 |
|
vqmovun.s16 d1, q10 |
|
vqmovun.s16 d4, q11 |
|
vst1.64 {d0}, [r0,:64], r1 |
|
vqmovun.s16 d5, q12 |
|
vst1.64 {d1}, [r0,:64], r1 |
|
vaddw.u8 q13, q1, d6 |
|
vst1.64 {d4}, [r0,:64], r1 |
|
vaddw.u8 q14, q1, d7 |
|
vst1.64 {d5}, [r0,:64], r1 |
|
vaddw.u8 q15, q1, d16 |
|
vaddw.u8 q1, q1, d17 @ this destroys q1 |
|
vqmovun.s16 d6, q13 |
|
vqmovun.s16 d7, q14 |
|
vqmovun.s16 d16, q15 |
|
vqmovun.s16 d17, q1 |
|
vst1.64 {d6}, [r0,:64], r1 |
|
vst1.64 {d7}, [r0,:64], r1 |
|
vst1.64 {d16}, [r0,:64], r1 |
|
vst1.64 {d17}, [r0,:64] |
|
bx lr |
|
endfunc |
|
|
|
function ff_vc1_inv_trans_8x4_dc_neon, export=1 |
|
ldrsh r2, [r2] @ int dc = block[0]; |
|
|
|
vld1.64 {d0}, [r0,:64], r1 |
|
vld1.64 {d1}, [r0,:64], r1 |
|
vld1.64 {d4}, [r0,:64], r1 |
|
vld1.64 {d5}, [r0,:64], r1 |
|
|
|
add r2, r2, r2, lsl #1 @ dc = ( 3 * dc + 1) >> 1; |
|
|
|
sub r0, r0, r1, lsl #2 @ restore r0 to original value |
|
|
|
add r2, r2, #1 |
|
asr r2, r2, #1 |
|
|
|
add r2, r2, r2, lsl #4 @ dc = (17 * dc + 64) >> 7; |
|
add r2, r2, #64 |
|
asr r2, r2, #7 |
|
|
|
vdup.16 q1, r2 @ dc |
|
|
|
vaddw.u8 q3, q1, d0 |
|
vaddw.u8 q8, q1, d1 |
|
vaddw.u8 q9, q1, d4 |
|
vaddw.u8 q10, q1, d5 |
|
vqmovun.s16 d0, q3 |
|
vqmovun.s16 d1, q8 |
|
vqmovun.s16 d4, q9 |
|
vst1.64 {d0}, [r0,:64], r1 |
|
vqmovun.s16 d5, q10 |
|
vst1.64 {d1}, [r0,:64], r1 |
|
vst1.64 {d4}, [r0,:64], r1 |
|
vst1.64 {d5}, [r0,:64] |
|
bx lr |
|
endfunc |
|
|
|
function ff_vc1_inv_trans_4x8_dc_neon, export=1 |
|
ldrsh r2, [r2] @ int dc = block[0]; |
|
|
|
vld1.32 {d0[]}, [r0,:32], r1 |
|
vld1.32 {d1[]}, [r0,:32], r1 |
|
vld1.32 {d0[1]}, [r0,:32], r1 |
|
vld1.32 {d1[1]}, [r0,:32], r1 |
|
|
|
add r2, r2, r2, lsl #4 @ dc = (17 * dc + 4) >> 3; |
|
vld1.32 {d4[]}, [r0,:32], r1 |
|
add r2, r2, #4 |
|
vld1.32 {d5[]}, [r0,:32], r1 |
|
vld1.32 {d4[1]}, [r0,:32], r1 |
|
asr r2, r2, #3 |
|
vld1.32 {d5[1]}, [r0,:32], r1 |
|
|
|
add r2, r2, r2, lsl #1 @ dc = (12 * dc + 64) >> 7; |
|
|
|
sub r0, r0, r1, lsl #3 @ restore r0 to original value |
|
|
|
lsl r2, r2, #2 |
|
add r2, r2, #64 |
|
asr r2, r2, #7 |
|
|
|
vdup.16 q1, r2 @ dc |
|
|
|
vaddw.u8 q3, q1, d0 |
|
vaddw.u8 q8, q1, d1 |
|
vaddw.u8 q9, q1, d4 |
|
vaddw.u8 q10, q1, d5 |
|
vqmovun.s16 d0, q3 |
|
vst1.32 {d0[0]}, [r0,:32], r1 |
|
vqmovun.s16 d1, q8 |
|
vst1.32 {d1[0]}, [r0,:32], r1 |
|
vqmovun.s16 d4, q9 |
|
vst1.32 {d0[1]}, [r0,:32], r1 |
|
vqmovun.s16 d5, q10 |
|
vst1.32 {d1[1]}, [r0,:32], r1 |
|
vst1.32 {d4[0]}, [r0,:32], r1 |
|
vst1.32 {d5[0]}, [r0,:32], r1 |
|
vst1.32 {d4[1]}, [r0,:32], r1 |
|
vst1.32 {d5[1]}, [r0,:32] |
|
bx lr |
|
endfunc |
|
|
|
function ff_vc1_inv_trans_4x4_dc_neon, export=1 |
|
ldrsh r2, [r2] @ int dc = block[0]; |
|
|
|
vld1.32 {d0[]}, [r0,:32], r1 |
|
vld1.32 {d1[]}, [r0,:32], r1 |
|
vld1.32 {d0[1]}, [r0,:32], r1 |
|
vld1.32 {d1[1]}, [r0,:32], r1 |
|
|
|
add r2, r2, r2, lsl #4 @ dc = (17 * dc + 4) >> 3; |
|
|
|
sub r0, r0, r1, lsl #2 @ restore r0 to original value |
|
|
|
add r2, r2, #4 |
|
asr r2, r2, #3 |
|
|
|
add r2, r2, r2, lsl #4 @ dc = (17 * dc + 64) >> 7; |
|
add r2, r2, #64 |
|
asr r2, r2, #7 |
|
|
|
vdup.16 q1, r2 @ dc |
|
|
|
vaddw.u8 q2, q1, d0 |
|
vaddw.u8 q3, q1, d1 |
|
vqmovun.s16 d0, q2 |
|
vst1.32 {d0[0]}, [r0,:32], r1 |
|
vqmovun.s16 d1, q3 |
|
vst1.32 {d1[0]}, [r0,:32], r1 |
|
vst1.32 {d0[1]}, [r0,:32], r1 |
|
vst1.32 {d1[1]}, [r0,:32] |
|
bx lr |
|
endfunc
|
|
|