/* * IEC 61937 muxer * Copyright (c) 2009 Bartlomiej Wolowiec * Copyright (c) 2010 Anssi Hannula * Copyright (c) 2010 Carl Eugen Hoyos * * This file is part of FFmpeg. * * FFmpeg is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * FFmpeg is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with FFmpeg; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ /** * @file * IEC-61937 encapsulation of various formats, used by S/PDIF * @author Bartlomiej Wolowiec * @author Anssi Hannula * @author Carl Eugen Hoyos */ /* * Terminology used in specification: * data-burst - IEC61937 frame, contains header and encapsuled frame * burst-preambule - IEC61937 frame header, contains 16-bits words named Pa, Pb, Pc and Pd * burst-payload - encapsuled frame * Pa, Pb - syncword - 0xF872, 0x4E1F * Pc - burst-info, contains data-type (bits 0-6), error flag (bit 7), data-type-dependent info (bits 8-12) * and bitstream number (bits 13-15) * data-type - determines type of encapsuled frames * Pd - length code (number of bits or bytes of encapsuled frame - according to data_type) * * IEC 61937 frames at normal usage start every specific count of bytes, * dependent from data-type (spaces between packets are filled by zeros) */ #include "avformat.h" #include "avio_internal.h" #include "spdif.h" #include "libavcodec/ac3.h" #include "libavcodec/dca.h" #include "libavcodec/dcadata.h" #include "libavcodec/aacadtsdec.h" #include "libavutil/opt.h" typedef struct IEC61937Context { const AVClass *av_class; enum IEC61937DataType data_type;///< burst info - reference to type of payload of the data-burst int length_code; ///< length code in bits or bytes, depending on data type int pkt_offset; ///< data burst repetition period in bytes uint8_t *buffer; ///< allocated buffer, used for swap bytes int buffer_size; ///< size of allocated buffer uint8_t *out_buf; ///< pointer to the outgoing data before byte-swapping int out_bytes; ///< amount of outgoing bytes int use_preamble; ///< preamble enabled (disabled for exactly pre-padded DTS) int extra_bswap; ///< extra bswap for payload (for LE DTS => standard BE DTS) uint8_t *hd_buf; ///< allocated buffer to concatenate hd audio frames int hd_buf_size; ///< size of the hd audio buffer int hd_buf_count; ///< number of frames in the hd audio buffer int hd_buf_filled; ///< amount of bytes in the hd audio buffer int dtshd_skip; ///< counter used for skipping DTS-HD frames /* AVOptions: */ int dtshd_rate; int dtshd_fallback; #define SPDIF_FLAG_BIGENDIAN 0x01 int spdif_flags; /// function, which generates codec dependent header information. /// Sets data_type and pkt_offset, and length_code, out_bytes, out_buf if necessary int (*header_info) (AVFormatContext *s, AVPacket *pkt); } IEC61937Context; static const AVOption options[] = { { "spdif_flags", "IEC 61937 encapsulation flags", offsetof(IEC61937Context, spdif_flags), AV_OPT_TYPE_FLAGS, {.dbl = 0}, 0, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM, "spdif_flags" }, { "be", "output in big-endian format (for use as s16be)", 0, AV_OPT_TYPE_CONST, {.dbl = SPDIF_FLAG_BIGENDIAN}, 0, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM, "spdif_flags" }, { "dtshd_rate", "mux complete DTS frames in HD mode at the specified IEC958 rate (in Hz, default 0=disabled)", offsetof(IEC61937Context, dtshd_rate), AV_OPT_TYPE_INT, {.dbl = 0}, 0, 768000, AV_OPT_FLAG_ENCODING_PARAM }, { "dtshd_fallback_time", "min secs to strip HD for after an overflow (-1: till the end, default 60)", offsetof(IEC61937Context, dtshd_fallback), AV_OPT_TYPE_INT, {.dbl = 60}, -1, INT_MAX, AV_OPT_FLAG_ENCODING_PARAM }, { NULL }, }; static const AVClass class = { .class_name = "spdif", .item_name = av_default_item_name, .option = options, .version = LIBAVUTIL_VERSION_INT, }; static int spdif_header_ac3(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; int bitstream_mode = pkt->data[5] & 0x7; ctx->data_type = IEC61937_AC3 | (bitstream_mode << 8); ctx->pkt_offset = AC3_FRAME_SIZE << 2; return 0; } static int spdif_header_eac3(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; static const uint8_t eac3_repeat[4] = {6, 3, 2, 1}; int repeat = 1; if ((pkt->data[4] & 0xc0) != 0xc0) /* fscod */ repeat = eac3_repeat[(pkt->data[4] & 0x30) >> 4]; /* numblkscod */ ctx->hd_buf = av_fast_realloc(ctx->hd_buf, &ctx->hd_buf_size, ctx->hd_buf_filled + pkt->size); if (!ctx->hd_buf) return AVERROR(ENOMEM); memcpy(&ctx->hd_buf[ctx->hd_buf_filled], pkt->data, pkt->size); ctx->hd_buf_filled += pkt->size; if (++ctx->hd_buf_count < repeat){ ctx->pkt_offset = 0; return 0; } ctx->data_type = IEC61937_EAC3; ctx->pkt_offset = 24576; ctx->out_buf = ctx->hd_buf; ctx->out_bytes = ctx->hd_buf_filled; ctx->length_code = ctx->hd_buf_filled; ctx->hd_buf_count = 0; ctx->hd_buf_filled = 0; return 0; } /* * DTS type IV (DTS-HD) can be transmitted with various frame repetition * periods; longer repetition periods allow for longer packets and therefore * higher bitrate. Longer repetition periods mean that the constant bitrate of * the outputted IEC 61937 stream is higher. * The repetition period is measured in IEC 60958 frames (4 bytes). */ static int spdif_dts4_subtype(int period) { switch (period) { case 512: return 0x0; case 1024: return 0x1; case 2048: return 0x2; case 4096: return 0x3; case 8192: return 0x4; case 16384: return 0x5; } return -1; } static int spdif_header_dts4(AVFormatContext *s, AVPacket *pkt, int core_size, int sample_rate, int blocks) { IEC61937Context *ctx = s->priv_data; static const char dtshd_start_code[10] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe }; int pkt_size = pkt->size; int period; int subtype; if (!core_size) { av_log(s, AV_LOG_ERROR, "HD mode not supported for this format\n"); return AVERROR(EINVAL); } if (!sample_rate) { av_log(s, AV_LOG_ERROR, "Unknown DTS sample rate for HD\n"); return AVERROR_INVALIDDATA; } period = ctx->dtshd_rate * (blocks << 5) / sample_rate; subtype = spdif_dts4_subtype(period); if (subtype < 0) { av_log(s, AV_LOG_ERROR, "Specified HD rate of %d Hz would require an " "impossible repetition period of %d for the current DTS stream" " (blocks = %d, sample rate = %d)\n", ctx->dtshd_rate, period, blocks << 5, sample_rate); return AVERROR(EINVAL); } /* set pkt_offset and DTS IV subtype according to the requested output * rate */ ctx->pkt_offset = period * 4; ctx->data_type = IEC61937_DTSHD | subtype << 8; /* If the bitrate is too high for transmitting at the selected * repetition period setting, strip DTS-HD until a good amount * of consecutive non-overflowing HD frames have been observed. * This generally only happens if the caller is cramming a Master * Audio stream into 192kHz IEC 60958 (which may or may not fit). */ if (sizeof(dtshd_start_code) + 2 + pkt_size > ctx->pkt_offset - BURST_HEADER_SIZE && core_size) { if (!ctx->dtshd_skip) av_log(s, AV_LOG_WARNING, "DTS-HD bitrate too high, " "temporarily sending core only\n"); if (ctx->dtshd_fallback > 0) ctx->dtshd_skip = sample_rate * ctx->dtshd_fallback / (blocks << 5); else /* skip permanently (dtshd_fallback == -1) or just once * (dtshd_fallback == 0) */ ctx->dtshd_skip = 1; } if (ctx->dtshd_skip && core_size) { pkt_size = core_size; if (ctx->dtshd_fallback >= 0) --ctx->dtshd_skip; } ctx->out_bytes = sizeof(dtshd_start_code) + 2 + pkt_size; ctx->length_code = ctx->out_bytes; av_fast_malloc(&ctx->hd_buf, &ctx->hd_buf_size, ctx->out_bytes); if (!ctx->hd_buf) return AVERROR(ENOMEM); ctx->out_buf = ctx->hd_buf; memcpy(ctx->hd_buf, dtshd_start_code, sizeof(dtshd_start_code)); AV_WB16(ctx->hd_buf + sizeof(dtshd_start_code), pkt_size); memcpy(ctx->hd_buf + sizeof(dtshd_start_code) + 2, pkt->data, pkt_size); return 0; } static int spdif_header_dts(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; uint32_t syncword_dts = AV_RB32(pkt->data); int blocks; int sample_rate = 0; int core_size = 0; if (pkt->size < 9) return AVERROR_INVALIDDATA; switch (syncword_dts) { case DCA_MARKER_RAW_BE: blocks = (AV_RB16(pkt->data + 4) >> 2) & 0x7f; core_size = ((AV_RB24(pkt->data + 5) >> 4) & 0x3fff) + 1; sample_rate = dca_sample_rates[(pkt->data[8] >> 2) & 0x0f]; break; case DCA_MARKER_RAW_LE: blocks = (AV_RL16(pkt->data + 4) >> 2) & 0x7f; ctx->extra_bswap = 1; break; case DCA_MARKER_14B_BE: blocks = (((pkt->data[5] & 0x07) << 4) | ((pkt->data[6] & 0x3f) >> 2)); break; case DCA_MARKER_14B_LE: blocks = (((pkt->data[4] & 0x07) << 4) | ((pkt->data[7] & 0x3f) >> 2)); ctx->extra_bswap = 1; break; case DCA_HD_MARKER: /* We only handle HD frames that are paired with core. However, sometimes DTS-HD streams with core have a stray HD frame without core in the beginning of the stream. */ av_log(s, AV_LOG_ERROR, "stray DTS-HD frame\n"); return AVERROR_INVALIDDATA; default: av_log(s, AV_LOG_ERROR, "bad DTS syncword 0x%x\n", syncword_dts); return AVERROR_INVALIDDATA; } blocks++; if (ctx->dtshd_rate) /* DTS type IV output requested */ return spdif_header_dts4(s, pkt, core_size, sample_rate, blocks); switch (blocks) { case 512 >> 5: ctx->data_type = IEC61937_DTS1; break; case 1024 >> 5: ctx->data_type = IEC61937_DTS2; break; case 2048 >> 5: ctx->data_type = IEC61937_DTS3; break; default: av_log(s, AV_LOG_ERROR, "%i samples in DTS frame not supported\n", blocks << 5); return AVERROR(ENOSYS); } /* discard extraneous data by default */ if (core_size && core_size < pkt->size) { ctx->out_bytes = core_size; ctx->length_code = core_size << 3; } ctx->pkt_offset = blocks << 7; if (ctx->out_bytes == ctx->pkt_offset) { /* The DTS stream fits exactly into the output stream, so skip the * preamble as it would not fit in there. This is the case for dts * discs and dts-in-wav. */ ctx->use_preamble = 0; } else if (ctx->out_bytes > ctx->pkt_offset - BURST_HEADER_SIZE) { av_log_ask_for_sample(s, "Unrecognized large DTS frame."); /* This will fail with a "bitrate too high" in the caller */ } return 0; } static const enum IEC61937DataType mpeg_data_type[2][3] = { // LAYER1 LAYER2 LAYER3 { IEC61937_MPEG2_LAYER1_LSF, IEC61937_MPEG2_LAYER2_LSF, IEC61937_MPEG2_LAYER3_LSF },//MPEG2 LSF { IEC61937_MPEG1_LAYER1, IEC61937_MPEG1_LAYER23, IEC61937_MPEG1_LAYER23 }, //MPEG1 }; static int spdif_header_mpeg(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; int version = (pkt->data[1] >> 3) & 3; int layer = 3 - ((pkt->data[1] >> 1) & 3); int extension = pkt->data[2] & 1; if (layer == 3 || version == 1) { av_log(s, AV_LOG_ERROR, "Wrong MPEG file format\n"); return AVERROR_INVALIDDATA; } av_log(s, AV_LOG_DEBUG, "version: %i layer: %i extension: %i\n", version, layer, extension); if (version == 2 && extension) { ctx->data_type = IEC61937_MPEG2_EXT; ctx->pkt_offset = 4608; } else { ctx->data_type = mpeg_data_type [version & 1][layer]; ctx->pkt_offset = spdif_mpeg_pkt_offset[version & 1][layer]; } // TODO Data type dependant info (normal/karaoke, dynamic range control) return 0; } static int spdif_header_aac(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; AACADTSHeaderInfo hdr; GetBitContext gbc; int ret; init_get_bits(&gbc, pkt->data, AAC_ADTS_HEADER_SIZE * 8); ret = ff_aac_parse_header(&gbc, &hdr); if (ret < 0) { av_log(s, AV_LOG_ERROR, "Wrong AAC file format\n"); return AVERROR_INVALIDDATA; } ctx->pkt_offset = hdr.samples << 2; switch (hdr.num_aac_frames) { case 1: ctx->data_type = IEC61937_MPEG2_AAC; break; case 2: ctx->data_type = IEC61937_MPEG2_AAC_LSF_2048; break; case 4: ctx->data_type = IEC61937_MPEG2_AAC_LSF_4096; break; default: av_log(s, AV_LOG_ERROR, "%i samples in AAC frame not supported\n", hdr.samples); return AVERROR(EINVAL); } //TODO Data type dependent info (LC profile/SBR) return 0; } /* * It seems Dolby TrueHD frames have to be encapsulated in MAT frames before * they can be encapsulated in IEC 61937. * Here we encapsulate 24 TrueHD frames in a single MAT frame, padding them * to achieve constant rate. * The actual format of a MAT frame is unknown, but the below seems to work. * However, it seems it is not actually necessary for the 24 TrueHD frames to * be in an exact alignment with the MAT frame. */ #define MAT_FRAME_SIZE 61424 #define TRUEHD_FRAME_OFFSET 2560 #define MAT_MIDDLE_CODE_OFFSET -4 static int spdif_header_truehd(AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; int mat_code_length = 0; const char mat_end_code[16] = { 0xC3, 0xC2, 0xC0, 0xC4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x97, 0x11 }; if (!ctx->hd_buf_count) { const char mat_start_code[20] = { 0x07, 0x9E, 0x00, 0x03, 0x84, 0x01, 0x01, 0x01, 0x80, 0x00, 0x56, 0xA5, 0x3B, 0xF4, 0x81, 0x83, 0x49, 0x80, 0x77, 0xE0 }; mat_code_length = sizeof(mat_start_code) + BURST_HEADER_SIZE; memcpy(ctx->hd_buf, mat_start_code, sizeof(mat_start_code)); } else if (ctx->hd_buf_count == 12) { const char mat_middle_code[12] = { 0xC3, 0xC1, 0x42, 0x49, 0x3B, 0xFA, 0x82, 0x83, 0x49, 0x80, 0x77, 0xE0 }; mat_code_length = sizeof(mat_middle_code) + MAT_MIDDLE_CODE_OFFSET; memcpy(&ctx->hd_buf[12 * TRUEHD_FRAME_OFFSET - BURST_HEADER_SIZE + MAT_MIDDLE_CODE_OFFSET], mat_middle_code, sizeof(mat_middle_code)); } if (pkt->size > TRUEHD_FRAME_OFFSET - mat_code_length) { /* if such frames exist, we'd need some more complex logic to * distribute the TrueHD frames in the MAT frame */ av_log(s, AV_LOG_ERROR, "TrueHD frame too big, %d bytes\n", pkt->size); av_log_ask_for_sample(s, NULL); return AVERROR_INVALIDDATA; } memcpy(&ctx->hd_buf[ctx->hd_buf_count * TRUEHD_FRAME_OFFSET - BURST_HEADER_SIZE + mat_code_length], pkt->data, pkt->size); memset(&ctx->hd_buf[ctx->hd_buf_count * TRUEHD_FRAME_OFFSET - BURST_HEADER_SIZE + mat_code_length + pkt->size], 0, TRUEHD_FRAME_OFFSET - pkt->size - mat_code_length); if (++ctx->hd_buf_count < 24){ ctx->pkt_offset = 0; return 0; } memcpy(&ctx->hd_buf[MAT_FRAME_SIZE - sizeof(mat_end_code)], mat_end_code, sizeof(mat_end_code)); ctx->hd_buf_count = 0; ctx->data_type = IEC61937_TRUEHD; ctx->pkt_offset = 61440; ctx->out_buf = ctx->hd_buf; ctx->out_bytes = MAT_FRAME_SIZE; ctx->length_code = MAT_FRAME_SIZE; return 0; } static int spdif_write_header(AVFormatContext *s) { IEC61937Context *ctx = s->priv_data; switch (s->streams[0]->codec->codec_id) { case CODEC_ID_AC3: ctx->header_info = spdif_header_ac3; break; case CODEC_ID_EAC3: ctx->header_info = spdif_header_eac3; break; case CODEC_ID_MP1: case CODEC_ID_MP2: case CODEC_ID_MP3: ctx->header_info = spdif_header_mpeg; break; case CODEC_ID_DTS: ctx->header_info = spdif_header_dts; break; case CODEC_ID_AAC: ctx->header_info = spdif_header_aac; break; case CODEC_ID_TRUEHD: ctx->header_info = spdif_header_truehd; ctx->hd_buf = av_malloc(MAT_FRAME_SIZE); if (!ctx->hd_buf) return AVERROR(ENOMEM); break; default: av_log(s, AV_LOG_ERROR, "codec not supported\n"); return AVERROR_PATCHWELCOME; } return 0; } static int spdif_write_trailer(AVFormatContext *s) { IEC61937Context *ctx = s->priv_data; av_freep(&ctx->buffer); av_freep(&ctx->hd_buf); return 0; } static av_always_inline void spdif_put_16(IEC61937Context *ctx, AVIOContext *pb, unsigned int val) { if (ctx->spdif_flags & SPDIF_FLAG_BIGENDIAN) avio_wb16(pb, val); else avio_wl16(pb, val); } static int spdif_write_packet(struct AVFormatContext *s, AVPacket *pkt) { IEC61937Context *ctx = s->priv_data; int ret, padding; ctx->out_buf = pkt->data; ctx->out_bytes = pkt->size; ctx->length_code = FFALIGN(pkt->size, 2) << 3; ctx->use_preamble = 1; ctx->extra_bswap = 0; ret = ctx->header_info(s, pkt); if (ret < 0) return ret; if (!ctx->pkt_offset) return 0; padding = (ctx->pkt_offset - ctx->use_preamble * BURST_HEADER_SIZE - ctx->out_bytes) & ~1; if (padding < 0) { av_log(s, AV_LOG_ERROR, "bitrate is too high\n"); return AVERROR(EINVAL); } if (ctx->use_preamble) { spdif_put_16(ctx, s->pb, SYNCWORD1); //Pa spdif_put_16(ctx, s->pb, SYNCWORD2); //Pb spdif_put_16(ctx, s->pb, ctx->data_type); //Pc spdif_put_16(ctx, s->pb, ctx->length_code);//Pd } if (ctx->extra_bswap ^ (ctx->spdif_flags & SPDIF_FLAG_BIGENDIAN)) { avio_write(s->pb, ctx->out_buf, ctx->out_bytes & ~1); } else { av_fast_malloc(&ctx->buffer, &ctx->buffer_size, ctx->out_bytes + FF_INPUT_BUFFER_PADDING_SIZE); if (!ctx->buffer) return AVERROR(ENOMEM); ff_spdif_bswap_buf16((uint16_t *)ctx->buffer, (uint16_t *)ctx->out_buf, ctx->out_bytes >> 1); avio_write(s->pb, ctx->buffer, ctx->out_bytes & ~1); } /* a final lone byte has to be MSB aligned */ if (ctx->out_bytes & 1) spdif_put_16(ctx, s->pb, ctx->out_buf[ctx->out_bytes - 1] << 8); ffio_fill(s->pb, 0, padding); av_log(s, AV_LOG_DEBUG, "type=%x len=%i pkt_offset=%i\n", ctx->data_type, ctx->out_bytes, ctx->pkt_offset); avio_flush(s->pb); return 0; } AVOutputFormat ff_spdif_muxer = { .name = "spdif", .long_name = NULL_IF_CONFIG_SMALL("IEC 61937 (used on S/PDIF - IEC958)"), .extensions = "spdif", .priv_data_size = sizeof(IEC61937Context), .audio_codec = CODEC_ID_AC3, .video_codec = CODEC_ID_NONE, .write_header = spdif_write_header, .write_packet = spdif_write_packet, .write_trailer = spdif_write_trailer, .flags = AVFMT_NOTIMESTAMPS, .priv_class = &class, };