Fixes the following warnings:
libavformat/chromaprint.c:117:42: warning: passing argument 2 of ‘chromaprint_feed’ from incompatible pointer type
libavformat/chromaprint.c:132:52: warning: passing argument 2 of ‘chromaprint_get_raw_fingerprint’ from incompatible pointer type
libavformat/chromaprint.c:143:71: warning: passing argument 4 of ‘chromaprint_encode_fingerprint’ from incompatible pointer type
The code for GAB2 subtitles predates refcounting AVPackets. So in order
to transfer the ownership of a packet's data pkt->data was simply stored
and the packet zeroed; in the end (i.e. in the read_close-function) this
data was then simply freed with av_freep(). This of course leads to a leak
of an AVBufferRef and an AVBuffer. It has been fixed by keeping and
eventually unreferencing the packet's buf instead.
Additionally, the packet is now reset via av_packet_unref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
An AVIStream (intended to be used as private data for an AVStream) would
leak in this scenario.
Also return a more fitting error code instead of AVERROR_INVALIDDATA.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one uses a build without dv demuxer, an AVIStream struct that is
destined to be used as private data for an AVStream by the avi demuxer
would leak, because it has been moved from the AVStream (that is going
to be freed) and only stored in a local variable (in order to be used
for another AVStream), but if the dv demuxer is disabled, the earlier
code returned immediately instead.
Also return a better error code in this scenario (instead of
AVERROR_INVALIDDATA).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using ff_free_stream() makes the code more readable, more future-proof
(the old code freed AVCodecContexts and AVCodecParameters and its
substructures manually, so that there is a chance that there would be a
memleak for some time if new substructures were added) and reduces
code size.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Related to this are the following changes:
* Mention the GNUmakefile that AviSynth+ provides for installing
just the headers.
* Expand on users installing AviSynth on their system a little
more.
AviSynth+ now supports non-Windows OSes, making AvxSynth
obsolete. Since we no longer support AviSynth 2.5 (which is
essentially what AvxSynth is), remove AvxSynth support and
replace it with AviSynth+.
As a result, the USING_AVISYNTH defines can be switched back
to generic _WIN32.
This brings a performance improvement when demuxing files, most of the
improvement comes from buffer pooling unbound packets.
time ffprobe -i samples/ffmpeg-bugs/trac/ticket6132/Samsung_HDR_-_Chasing_the_Light.ts -show_packets >/dev/null 2>&1
Before:
real 0m1.967s
user 0m1.471s
sys 0m0.493s
After:
real 0m1.497s
user 0m1.364s
sys 0m0.129s
Based on a patch of James Almer.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 1169365504 + 981452800 cannot be represented in type 'int'
Fixes: ticket8293
Found-by: Suhwan
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 524280 * 4432 cannot be represented in type 'int'
Fixes: ticket8322
Found-by: Suhwan
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Put a buffer with a known fixed size into the demuxer's context instead
of allocating it separately. This also allows to remove the demuxer's
read_close()-function.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
8ffcc826 added support for muxing BlockAdditions with BlockAddID equal
to one. The restriction to BlockAddID == 1 probably resulted from
a limitation to what was needed; yet over time this led to three
occurences of "(side_data_size && additional_id == 1)". This commit
changes this by setting side_data_size to 0 if additional_id != 1.
It also stops hardcoding 1 for the value of BlockAddID to write;
but it still upholds the requirement that it is 1. See below.
Despite BlockAddId actually having a default value of 1, it is still
written, because until very recently (namely dbc50f8a) our demuxer
used a wrong default value of 0.
Furthermore, use put_ebml_binary() to write the BlockAdditional element.
(The Matroska specifications have evolved and now the BlockAddID 1 is
reserved for the codec (as described in the codec's codec mapping),
BlockMore elements with BlockAddID > 1 are now of a more
codec-independent nature and require a BlockAdditionalMapping in the
track's TrackEntry. Given that this muxer does not support writing said
BlockAdditionalMapping yet (actually, none have been defined yet), we
have to uphold the requirement that BlockAddID == 1.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When updating the Tags at the end, the Matroska muxer would twice check
for whether (!mkv->is_live) is true, despite this code being only executed
if it is. Furthermore, a loop iterates over all the streams even when
there is no Tags element to update at all, because the check for whether
there are Tags is only performed later. This commit fixes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avio_close_dyn_buf() has a bug: When the write pointer does not point to
the end of the written data when calling it (i.e. when one has performed
a seek back to update already written data), it would not add padding to
the end of the buffer, but to the current position, overwriting other
data; furthermore the reported size would be wrong (off by the amount of
data it has overwritten with padding).
In order not to run into this when updating already written elements or
elements for which size has only been reserved, the Matroska muxer would
first record the current position of the dynamic buffer, then seek to
the desired position, perform the update and seek back to the earlier
position.
But now that end_ebml_master_crc32() does not make use of
avio_close_dyn_buf() any more, this is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer uses a dynamic buffer to buffer the content of
Clusters before eventually writing them. Up until now, each time a
Cluster was written, the dynamic buffer was closed, i.e. freed; now it
is only reset, saving allocations of the AVIOContext itself, its opaque
as well as most of the reallocations of the buffer.
This is advantageous performance-wise, in particular on systems where
reallocations are slow (namely Windows). The following table shows the
decicyles for writing a frame on Linux (Ubuntu 19.10) and Windows (7)
on an x64 Haswell (to /dev/null on Linux, to stdout which is discarded
on Windows (the default values of the size and duration of clusters for
seekable output have been explicitly set in this case); in all tests,
writing CRC-32 values has been disabled in all tests; calls to the muxer's
write_packet function in write_packet() in libavformat/mux.c have been
timed; each of the following tests has been repeated 50 times):
| Windows before | Windows after | Linux before | Linux after
_________________________________________________________________
A | 979437 | 192304 | 259500 | 183320
B | 715936 | 155648 | 152786 | 130879
C | 265115 | 56034 | 78496 | 53243
D | 386224 | 80307 | 128894 | 75354
E | 21732 | 10695 | 11320 | 9801
(A is a 10.2 mb/s file with a GOP length of 2s, amounting to an average
Cluster size of about 2.5 MiB; the average Cluster size of B is 1.1 MiB;
for C it is 2.35 MiB, for D it is 0.46 MiB; for E - a file with just a
single audio track of 158kb/s resulting in a Cluster size of about 100
kB, the relative gains were the smallest, probably because of the small
Cluster size.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
vf_dnn_processing.c recently changed to use swscale to trasfer data
between AVFrame and dnn model.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
If the buffer doesn't contain enough bytes when reading a stream,
fail rather than continuing on with initialized data. Caught by
Chromium fuzzeras (crbug.com/1065731).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Using a compiler with a different host triplet is considered
cross-compiling, even when it is for the same architecture as the
build system. With such a cross-compiler, it is still valid to
optimize builds with --cpu=host. Make the condition that aborts in
this case into a warning instead, since a cross-compiler for an
incompatible architecture will fail with -mtune=native anyway.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
containing updated extradata, in this case a new FLAC streaminfo.
Furthermore, it also tests that the Matroska muxer is able to preserve
uncommon channel layouts by adding Vorbis comments to the CodecPrivate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The hnm demuxer's context struct contained lots of fields that are
write-only variables or that are not used outside of parsing the header
and that can therefore be replaced by local variables of hnm_read_header().
This commit removes all of these from the context; the second type has
been replaced by local variables.
An AVPacket (that was initialized when reading the header and for which
dead code to unreference it existed in hnm_read_close()) is among the
removed things. Removing it allowed to remove hnm_read_close()
altogether and also removes another instance of usage of sizeof(AVPacket).
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Guo, Yejun
Lynne
Timo Rothenpieler
Michael Niedermayer
Carl Eugen Hoyos
Andreas Rheinhardt
Stephen Hutchinson
Marton Balint
Gautam Ramakrishnan
Paul B Mahol
Gyan Doshi
Steve Lhomme
John Rummell
Ruiling Song
David Michael