Demuxing only. Muxing is disabled as altref frame handling is not
defined in the spec, and there's no way to know the presence of
such frames during stream initialization.
Based on a patch by Steven Liu.
Fixes ticket #7000
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
An invalid file may cause huge alloc. Delay expansion of ctts entries
until the number of samples is known in mov_build_index.
Fixes: 23
Found-by: zhao dongzhuo, AD-lab of Venustech
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On some failure paths, the error code is not correctly set.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In function mov_read_custom(), it returns 0 on the path that av_malloc()
returns a NULL pointer. 0 indicates success. An error code should be
assigned to ret.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In the event of ff_mov_read_stsd_entries() failure, sc->stsd_count
is not updated, even if the function allocates extradata memory.
Instead update the sc->stsd_count as entries are parsed so that
mov_read_close() can do the right thing.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Potentially fixes:
https://bugs.chromium.org/p/chromium/issues/detail?id=786269#c1
In theory, the crash can be triggered by an invalid stream that has
either tfdt or trun outside of the moof
Reviewed-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Should be unconditionally freed at the end of mov_fix_index() in
case it hasn't been used during the fix up.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Reviewed-by: Sasi Inguva <isasi-at-google.com@ffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
After c2a8f0fcbe this can happen on normal edit lists starting on a B-frame.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Subtract the calculated dts offset from the requested timestamp before
seeking. This fixes an error "Error while filtering: Operation not
permitted" observed with a short file which contains only one key frame
and starts with negative timestamps.
Then, av_index_search_timestamp() returns a valid negative timestamp,
but mov_seek_stream bails out with AVERROR_INVALIDDATA.
Fixes ticket #6139.
Signed-off-by: Jonas Licht <jonas.licht@fem.tu-ilmenau.de>
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When keyframe intervals of dash segments are not perfectly aligned,
fragments in the stream can overlap in time. The previous sorting by
timestamp causes packets to be read out of decode order and results
in decode errors.
Insert new "trun" index entries into index_entries in the order that
the trun are referenced by the sidx.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sets the correct start padding value when an edit list is present.
A new fate test is added, fate-mov-440hz-10ms, to ensure this is
handled correctly.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Reviewed-by: Sasi Inguva <isasi-at-google.com@ffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Missing EOF check in loop
No testcase
Found-by: Xiaohei and Wangchu from Alibaba Security Team
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
MP4 files with fragments might have the first moof box that is mentioned
in a fragment index before the first mdat box. Since it is then already
parsed by mov_read_header, we have to make sure that mov_switch_root
will not parse it again when seeking by setting the headers_read flag in
the index. Parsing it a second time would cause the ctts_data array to
receive a second copy of the information from the trun box, leading to
wrong PTS values for the second and following fragments in presence of
B-frames.
Fixes ticket 6560.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Reviewed-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ctts data in ffmpeg relies on the index entries array to be 1:1
with samples... yet sc->sample_count can be read directly from
the 'stsz' box and index entries are only generated if a chunk
count has been read from 'stco' box.
Ensure that if sc->sample_count > 0, sc->chunk_count is too as
a basic sanity check. Additionally we need to check that after
the index is built we have the right number of entries, so we
also check in mov_read_trun() that sc->sample_count ==
st->nb_index_entries.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When sidx box support is enabled, the code will skip reading all
trun boxes (each containing ctts entries for samples inthat box).
If seeks are attempted before all ctts values are known, the old
code would dump ctts entries into the wrong location. These are
then used to compute pts values which leads to out of order and
incorrectly timestamped packets.
This patch fixes ctts processing by always using the index returned
by av_add_index_entry() as the ctts_data index. When the index gains
new entries old values are reshuffled as appropriate.
This approach makes sense since the mov demuxer is already relying
on the mapping of AVIndex entries to samples for correct demuxing.
As a result of this all ctts entries are now 1-count. A followup
change will be submitted to remove support for > 1 count entries
which will simplify seeking.
Notes for future improvement:
Probably there are other boxes (stts, stsc, etc) that are impacted
by this issue... this patch only attempts to fix ctts since it
completely breaks packet timestamping.
This patch continues using an array for the ctts data, which is not
the most ideal given the rearrangement that needs to happen (via
memmove as new entries are read in). Ideally AVIndex and the ctts
data would be set-type structures so addition is always worst case
O(lg(n)) instead of the O(n^2) that exists now; this slowdown is
noticeable during seeks.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed integer overflow is undefined behavior.
Detected with clang and -fsanitize=signed-integer-overflow
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When using streaming input, it may be possible to see frames that appear
before the current_frame. When these frames are inserted into the
index, the current_frame needs to be updated so it is still pointing
at the same frame.
Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
mov_finalize_stsd_codec() parses stream information from the ALAC extradata,
so run it after the extradata processing is completed in mov_read_stsd().
Fixes playback of 96kHz ALAC streams muxed by qaac or the reference alac encoder.
Adapted from an FFmpeg patch by Hendrik Leppkes <h.leppkes@gmail.com>
Bug-Id: 1072
If the videos starts with B frame, then the minimum composition time
as computed by stts + ctts will be non-zero. Hence we need to shift
the DTS, so that the first pts is zero. This was the intention of that
code-block. However it was subtracting by the wrong amount.
For example, for one of the videos in the bug nonFormatted.mp4 we have
stts:
sample_count duration
960 1001
ctts:
sample_count duration
1 3003
2 0
1 3003
....
The resulting composition times are : 3003, 1001, 2002, 6006, ...
The minimum composition time or PTS is 1001, which should be used to
offset DTS. However the code block was wrongly using ctts[0] which is
3003. Hence the PTS was negative. This change computes the minimum pts
encountered while fixing the index, and then subtracts it from all the
timestamps after the edit list fixes are applied.
Samples files available from:
https://bugs.chromium.org/p/chromium/issues/detail?id=721451https://bugs.chromium.org/p/chromium/issues/detail?id=723537
fate-suite/h264/twofields_packet.mp4 is a similar file starting with 2
B frames. Before this change the PTS of first two B-frames was -6006
and -3003, and I am guessing one of them got dropped when being decoded
and remuxed to the framecrc before, and now it is not being dropped.
Signed-off-by: Sasi Inguva <isasi@google.com>
Some samples have their metadata track time_scale incorrectly set to 0
and the check introduced by a398f054fd
prevents playback of those samples. Setting the time_scale to 1 fixes
playback.