because hls_enc_key and hls_enc_iv get 16byte char
for example:
-hls_enc_key 0123456789abcdef -hls_enc_iv abcdefghijklmnop
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Some legacy applications such as AVI2MVE expect raw RGB bitmaps
to be stored bottom-up, whereas our RIFF BITMAPINFOHEADER assumes
they are always stored top-down and thus write a negative value
for height. This can prevent reading of these files.
Option flipped_raw_rgb added to AVI and Matroska muxers
which will write positive value for height when enabled.
Note that the user has to flip the bitmaps beforehand using other
means such as the vflip filter.
The Matroska muxer has always mapped the title tag to the FileDescription
element for attachments streams since support for writing attachments
was added in commit c7a63a521b. This
commit merely documents this fact.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Sequence numbers of segments should be unique, if an encoder is using shorter
than 1 second segments and it is restarted, then future segments will be using
already used sequence numbers if initial sequence number is based on the number
of seconds since epoch and not microseconds.
Signed-off-by: Marton Balint <cus@passwd.hu>
Up until now, the Matroska muxer would mark a track as default if it had
the disposition AV_DISPOSITION_DEFAULT or if there was no track with
AV_DISPOSITION_DEFAULT set; in the latter case even more than one track
of a kind (audio, video, subtitles) was marked as default which is not
sensible.
This commit changes the logic used to mark tracks as default. There are
now three modes for this:
a) In the "infer" mode the first track of every type (audio, video,
subtitles) with default disposition set will be marked as default; if
there is no such track (for a given type), then the first track of this
type (if existing) will be marked as default. This behaviour is inspired
by mkvmerge. It ensures that the default flags will be set in a sensible
way even if the input comes from containers that lack the concept of
default flags. This mode is the default mode.
b) The "infer_no_subs" mode is similar to the "infer" mode; the
difference is that if no subtitle track with default disposition exists,
no subtitle track will be marked as default at all.
c) The "passthrough" mode: Here the track will be marked as default if
and only the corresponding input stream had disposition default.
This fixes ticket #8173 (the passthrough mode is ideal for this) as
well as ticket #8416 (the "infer_no_subs" mode leads to the desired
output).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When the user opted to write the Cues at the beginning, the Cues were
simply written without checking in advance whether enough space has been
reserved for them. If it wasn't enough, the data following the space
reserved for the Cues was simply overwritten, corrupting the file.
This commit changes this by checking whether enough space has been
reserved for the Cues before outputting anything. If it isn't enough,
no Cues will be output at all and the file will be finalized normally,
yet writing the trailer will nevertheless return an error to notify
the user that his wish of having Cues at the front of the file hasn't
been fulfilled.
This change opens new usecases for this option: It is now safe to use
this option to e.g. record live streams or to use it when muxing the
output of an expensive encoding, because when the reserved space turns
out to be insufficient, one ends up with a file that just lacks Cues
but is otherwise fine.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This changes the separator character from comma to colon, but since this option
was only added recently I think it should be done for consistency with other
similar options.
Signed-off-by: Marton Balint <cus@passwd.hu>
This sets the range of the first automatically assigned PMT PID or elementary
stream PID parameters to [0x20, 0x1ffa]. You can still assign manually a PID
for a stream using AVStream->id in the wider [0x10, 0x1ffe] range as specified
by ISO13818-1. But since DVB and ATSC both reserves some PIDs, let's not allow
them to be automatically assigned.
Also make sure that assigned PID numbers are valid and fix the error message
for the previous PID collision checks.
Signed-off-by: Marton Balint <cus@passwd.hu>
Implemented as a variant of the hash muxer, reusing most functions,
and making use of the previously introduced array of hashes.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The packet counting based approach caused excessive sdt/pat/pmt for VBR, so
let's use a timestamp based approach instead similar to how we emit PCRs.
SDT/PAT/PMT period should be consistent for both VBR and CBR from now on.
Also change the type of sdt_period and pat_period to AV_OPT_TYPE_DURATION so no
floating point math is necessary.
Fixes ticket #3714.
Signed-off-by: Marton Balint <cus@passwd.hu>
currently master playlist and subtitle playlist creation does not use
temporary files even when temp_file flag is set. Most of the use cases
it is not a problem because master playlist creation happens once on the
beginning of the whole process. But if master playlist is periodically
re-created because of master_pl_refresh_rate is set, non-atomic playlist
creation may cause problems in case of live streaming. This patch
correct this behavior by adding this functionality.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option,
%v is expected either in the filename or in the last sub-directory name,
but only in one of them. When both of them contains %v string, current
error message only states half of the truth.
And even %v may appears several times inside the last sub-directory name
or in filename pattern.
This patch clarifies this in the log message and in the doc also.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Currently %v is substituted by its variant index value (0, 1, 2
etc.). In some use cases it would be handy to specify names for variants
instead of numerical indexes. This patch makes it possible to use names
instead of default indexes. In var_stream_map option each or some of the
variant streams may use an optional name attributum (e.g.
-var_stream_map "v:0,a:0,name:sd v:1,a:1,name:720p") If a name is
specified for a variant, then this name value will be used as
substitution value of %v instead of the default index value.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Apple doesn't have an official spec for LHLS. Meanwhile hls.js player folks are
trying to standardize a open LHLS spec. The draft spec is available in https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md
This option will also try to comply with the above open spec, till Apple's spec officially supports it.
Applicable only when @var{streaming} and @var{hls_playlist} options are enabled.
Limin Wang
Steven Liu
Nikola Pajkovsky
Gyan Doshi
Siyuan Huang
Przemysław Sobala
Marton Balint
Andreas Rheinhardt
James Almer
Alfred E. Heggestad
Andriy Gelman
Moritz Barsnick
Leo Zhang
Jun Zhao
Bela Bodecs
Derek Buitenhuis
Karthick J
Mark Reid
Reto Kromer