Current version of dvbsub encoder doesn't support HD DVB subtitles. The high
resolution bitmaps are muxed into the stream but without the DDS (display definition
segment) the players asume that the DVB subtitles are in SD (720x576) resolution
which causes them to either render the subtitles too large and misplaced or don't
render them at all. By including the DDS as defined in section 7.7.1 of ETSI EN 300
743 (V1.3.1) this problem is fixed.
7.2.1 Display definition segment The display definition for a subtitle service may
be defined by the display definition segment if present in the stream. Absence of a
DDS implies that the stream is coded in accordance with EN 300 743 (V1.2.1) [5] and
that a display width of 720 pixels and a display height of 576 lines may be assumed.
https://www.etsi.org/deliver/etsi_en/300700_300799/300743/01.03.01_60/en_300743v010301p.pdf
Signed-off-by: Jernej Fijacko <mikrohard@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: out of array access
Fixes: 15540/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APNG_fuzzer-5684905029140480
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 15484/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5765377054736384
Fixes: 15559/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5710295743332352
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: null pointer dereference
Fixes: 15464/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5681391150301184
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of negative value -456
Fixes: 15561/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPC8_fuzzer-5758130404720640
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Suggested-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
merge_pmt_versions was not usable if multiple programs were present because
when it was searching for candidate streams it did not make sure that the PMT was
of the same program. This caused the streams of all programs to get merged into
a single (garbled) program.
This patch makes sure that the program number (service ID) is also matching
with the old streams when parsing the PMT making the feature useful for multi
program streams.
This change might cause issues for single program streams if the program number
changes, but I think it is acceptable because the goal of the option is to make
the parsing resilient to PID changes, and that is still working as expected.
Signed-off-by: Marton Balint <cus@passwd.hu>
Up until now, it was simply presumed that the first packet had a pts of
zero; otherwise the duration of the first chunk was wrong.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The earlier version of the webm_chunk muxer had several bugs:
1. If the first packet of an audio stream didn't have a PTS of zero,
then no chunk will be started before a packet is delivered to the
underlying Matroska/WebM muxer, i.e. the AVFormatContext used to write
these packets had a NULL as AVIOContext for output. This is behind the
crash in ticket #5752.
2. If an error happens during writing a packet, the underlyimg
Matroska/WebM muxer context is freed. This leads to a use-after-free
coupled with a double-free in webm_chunk_write_trailer (which supposes
that the underlying AVFormatContext is still valid).
3. Even when no error occurs at all, webm_chunk_write_trailer is still
buggy: After the underlying Matroska/WebM muxer has written its trailer,
ending the chunk implicitly flushes it again which is illegal at this
point.
These bugs have been fixed.
Fixes#5752.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
after a successful init if the function fails for another reason close
the codec without requiring FF_CODEC_CAP_INIT_CLEANUP which is meant to
cover init failures themselves. fixes a memory leak in those cases.
BUG=oss-fuzz:15529
Signed-off-by: James Zern <jzern@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
addi/daddi are deprecated by MIPS for years, and MIPS r6 remove
them.
They should be replace with addiu:
ADDIU performs the same arithmetic operation but
does not trap on overflow.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Loongson 3A4000 and 2k1000 has supported MSA2.0.
This patch optimized SAD_UB2_UH,UNPCK_R_SH_SW,UNPCK_SB_SH and UNPCK_SH_SW with MSA2.0 instruction.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The truehd_core bitstream filter decreases the sizes of the
major_sync_info structure (if present), of the
substream_directory and of the substreams themselves. As a consequence,
there is enough space available in front of the actual substream data
for the new header, so that one only needs to modify the header in front
of the actual data (which apart from shrinking is left untouched) and
the packet's size and buffer pointer (after having made sure that the
packet is writable).
This and switching to bsf_get_packet_ref also removed the need for
having separate packets for in- and output.
Even if the input is not writable, there are noticable performance
improvements: The average of 10 iterations of processing a file with 262144
runs each (inlcuding about 20 skips per iteration) went down from 5669
to 4362 decicycles. If the input is writable, it goes down to 1363
decicycles.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Words of 16 bit are the unit for TrueHD's size and offset fields;
in particular the sizes of the high-level structures of TrueHD are
always a multiple of a byte; yet truehd_core unnecessarily used
bit offsets at several places. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
1. The loop counter of the substream_directory loop is always less than
the number of substreams, yet within the loop it is checked whether it
is less than FFMIN(3, s->hdr.num_substreams), although the check for < 3
would suffice.
2. In case the packet is a major sync packet, the last two bytes of the
major sync structure were initialized to 0xff and then immediately
overwritten afterwards without ever making use of the values just set.
3. When updating the parity_nibble during writing the new
substream_directory, the parity_nibble is updated one byte at a time
with bytes that might be read from the output packet's data. But one can
do both bytes at the same time without resorting to the data just
written by XOR'ing with the variable that contains the value that has
just been written as a big endian number. This changes the intermediate
value of parity_nibble, but in the end it just amounts to a reordering
of the sum modulo two that will eventually be written as parity_nibble.
Due to associativity and commutativity, this value is unchanged.
4. init_get_bits8 already checks that no overflow happens during the
conversion of its argument from bytes to bits. ff_mlp_read_major_sync
makes sure not to overread (the maximum size of a major_sync_info is 60
bytes anyway) and last_offset is < 2^13, so that no overflow in the
calculation of size can happen, i.e. the check for whether size is >= 0
is unnecessary. But then size is completely unnecessary and can be
removed.
5. In case the packet is just passed through, it is unnecessary to read
the packet's dts. This is therefore postponed to when we know that the
packet is not passed through.
6. Given that it seems overkill to use a bitreader just for one
variable, the size of the input access unit is now read directly.
7. A substream's offset (of the end of the substream) is now stored as is
(i.e. in units of words).
These changes amount to a slight performance improvement: It improved
from 5897 decicycles of ten runs with about 262144 runs each (including
an insignificant amount -- about 20-25 usually of skips) to 5747
decicycles under the same conditions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Several checks (e.g. when the size of the input packet is too small)
simply used "goto fail", but didn't set the return value appropriately
for an error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If truehd_core strips Atmos data away, three parts of the output differ
in size compared to the input access unit: a) The major_sync_info block
if the extra_channel_meaning_data is present, as the newly written
output never contains said block; b) the substream_directory (because
entries relating to discarded substreams are discarded, too); and c)
the actual substream data. b) and c) have already been taken into account
when choosing the size of the output packet, but a) has been forgotten.
This is also the reason behind the end of the output buffer having been
uninitialized until 801d78f0. The workaround added in said commit has
been removed, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The most serious bit of the substream_info header field (in a mayor sync
packet) indicates whether a 16-channel presentation is present in the
bitstream. If set, the extended_substream_info header field contains
information about the 16-channel presentation. This presentation always
uses substream 3, a substream that is discarded by truehd_core. So
substream_info needs to be changed to no longer indicate the presence
of a 16-channel presentation in order for truehd_core's output to be
consistent. This is implemented in this commit.
This change also makes MediaInfo no longer display the presence of Atmos
in the output of truehd_core.
Also, set the (now irrelevant) extended_substream_info field to zero as
this seems to be the common value for ordinary TrueHD.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Given the recent changes to ff_cbs_delete_unit, it is no longer sensible
to use a return value for ff_cbs_h264_delete_sei_message; instead, use
asserts to ensure that the required conditions are met and remove the
callers' checks for the return value. Also, document said conditions.
An assert that is essentially equivalent to the one used in
ff_cbs_delete_unit has been removed, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ff_cbs_delete_unit never fails if the index of the unit to delete is
valid, as it is with all current callers of the function. So just assert
in ff_cbs_delete_unit that the index is valid and change the return
value to void in order to remove the callers' checks for whether
ff_cbs_delete_unit failed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 2147475672 + 8192 cannot be represented in type 'int'
Fixes: 15415/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5712074128228352
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Jernej Fijacko
Andreas Rheinhardt
Paul B Mahol
Michael Niedermayer
Marton Balint
Steven Liu
James Zern
Cameron Cawley
YunQiang Su
Shiyou Yin
Thilo Borgmann