Adds support for the custom ASF container used by some Argonaut Games'
games, such as 'Croc! Legend of the Gobbos', and 'Croc 2'.
Can also handle the sample files in:
https://samples.ffmpeg.org/game-formats/brender/part2.zip
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
It is a common mistake that people only increase fifo_size when they experience
drops, unfortunately this does not help for higher bitrate (> 100 Mbps) streams
when the reader thread simply might not receive the packets in time (especially
under high CPU load) if the default 64 KB of kernel buffer size is used.
New default is determined so that common linux systems can set this buffer size
without tuning kernel parameters.
Signed-off-by: Marton Balint <cus@passwd.hu>
As per the PIFF standard, the timescale of 10000000
is recommended but not mandatory, so don't override
the user-set value.
A warning is shown for non-recommended values.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently when hls_enc is active and there are multiple variant stream
outputs, default key file url construction does not work, because it is
based on the FormatContext' url field. But in case of multiple variant
streams, it contains the variant m3u8 output playlist url that contains
the %v placeholder. So the result key file url will hold the %v
placeholder causing run time error message about "could not write the
key file".
This patch correct this behaviour, and use the master playlist url for
constructing the output key file url when master playlist is vailable.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When program_date_time flag is present, in m3u8 playlist file each
segment has a corresponding EXT-X-PROGRAM-DATE-TIME value. The intial
program-date-time value is the actual current time at init and
each new segment increments this value by its duration. When append_list
flags is also present, existing playlist parsing by hls_append_segment
treats existing segments as new segments regarding the program-date-time
calculation. But it should not do that, because this way all real the
new segments' EXT-X-PROGRAM-DATE-TIME values will be shifted erroneously
by the sum duration of existing segments. Instead it should have
decremented the initial program-date-time value by its duration. This
would ensure that
the first new segment's program-date-time value had the current time as
it is expected.
This patch corrects this behaviour and prevent existing segments to
increment the value of initial_prog_date_time variable but decrements
it.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
fix ticket: 8461
there is no problem before commit 75aea52a10
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Also simplify it and make it always log the error.
This fixes for example the image2 muxer when used with an URL which also
contains the protocol:
ffmpeg -f lavfi -i testsrc -vframes 10 -atomic_writing 1 file:out%d.png
Signed-off-by: Marton Balint <cus@passwd.hu>
As written in https://github.com/Haivision/srt/blob/v1.4.1/docs/API.md,
the nonblock mode is activated if SRTO_SNDSYN and SRTO_RCVSYN, for
sending and receiving respectively, are set to 0.
Signed-off-by: Marton Balint <cus@passwd.hu>
Both S16LE as well as DTS can have lots of 0 bytes in silent segments
Using these results in error. Thus this patch skips 0 bytes in
comparission.
Fixes Ticket6561
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will likely also fix CID 1452427, a false positive resulting from
Coverity thinking that av_dict_set() automatically frees its key and
value parameters (even without the AV_DICT_DONT_STRDUP_* flags).
(AV_DICT_APPEND and AV_DICT_DONT_STRDUP_VAL are compatible with each
other since a8c5b455, so we can reset this flag here. It has originally
been removed in 0dc66553 when appending was added.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When shifting the already written data in order to write the keyframe
index, the flv muxer would first store the pre-shift size, then
calculate how big the index will be eventually, then perform some seeks
to update some size fields, then seek back to the end of the file to get
the new position, followed by a seek to the position where writing will
really start. Seeking back to the (already known) end position (that is
actually used to perform this seek) to get the end position is of course
unnecessary. It has been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the faststart option for the mov/mp4 muxer is used, the current
position (i.e. the size of the already written data pre-shifting) was
evaluated twice: First in an initialization and then again later,
overwriting the first value without having ever touched it. So remove
the initialization.
Also, the clone of this code in the Sega FILM muxer behaves the same and
has been treated the same.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
s337m_get_offset_and_codec does not make use of
AVFormatContext: AVClass is enough for logging.
Will facilitate further use from outside
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Allows to set an intended target latency while streaming that clients can use
to measure when using low latency mode.
Signed-off-by: James Almer <jamrial@gmail.com>
In combination with the streaming option it constrains the value of a few elements,
to prevet clients from buffering too much data before starting presentation.
Signed-off-by: James Almer <jamrial@gmail.com>
If not available, set flags to 24 (bits 4 and 5), to signal the wallclock value
is read at the time of writing the atom.
Signed-off-by: James Almer <jamrial@gmail.com>
Implemented as as a frag_duration muxer option and key=value entry in the
adaptation_sets muxer option. It has the same syntax as the seg_duration option.
A new frag_type option is also introduced to select the kind of fragmentation.
Signed-off-by: James Almer <jamrial@gmail.com>
Implemented as as a seg_duration key=value entry in the adaptation_sets muxer
option.
It has the same syntax as the global seg_duration option, and has precedence
over it if set.
Signed-off-by: James Almer <jamrial@gmail.com>
Since bae8844e35, the packet is automatically unreferenced in
ff_read_packet() when an error is returned; but the documentation of
this of AVInputFormat.read_packet has not been updated accordingly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current code only checks when writing the trailer whether the video
format and Codec ID are actually compatible with the container. At this
point, a lot of data will already have been written (in vain, of
course), so check during the init function instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Up until now, the Sega FILM muxer complained if the first stream wasn't a
video stream that there is no video stream at all which is of course
nonsense. So postpone this check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
by changing the type to unsigned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In order to indicate that the frames in a BlockGroup are not keyframes,
one has to add a ReferenceBlock element containing the timestamp of a
referenced Block that has already been written. The timestamp ought to be
relative to the timestamp of the Block it is attached to. Yet the
Matroska muxer used the relative timestamp of the preceding Block of the
track, i.e. the timestamp of the preceding block relative to the
timestamp of the Cluster containing said block (that need not be the
Cluster containing the current Block). This has been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
libavformat/img2.h: New field export_path_metadata to
VideoDemuxData to only allow the use of the extra metadata
upon explicit user request, for security reasons.
libavformat/img2dec.c: Modify image2 demuxer to make available
two special metadata entries called lavf.image2dec.source_path
and lavf.image2dec.source_basename, which represents, respectively,
the complete path to the source image for the current frame and
the basename i.e. the file name related to the current frame.
These can then be used by filters like drawtext and others. The
metadata fields will only be available when explicitly enabled
with image2 option -export_path_metadata 1.
doc/demuxers.texi: Documented the new metadata fields available
for image2 and how to use them.
doc/filters.texi: Added an example on how to use the new metadata
fields with drawtext filter, in order to plot the input file path
to each output frame.
Usage example:
ffmpeg -f image2 -export_path_metadata 1 -pattern_type glob
-framerate 18 -i '/path/to/input/files/*.jpg'
-filter_complex drawtext="fontsize=40:fontcolor=white:
fontfile=FreeSans.ttf:borderw=2:bordercolor=black:
text='%{metadata\:lavf.image2dec.source_basename\:NA}':x=5:y=50"
output.avi
Fixes#2874.
Signed-off-by: Alexandre Heitor Schmidt <alexandre.schmidt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This will likely also fix CID 1452574 and 1452565, false positives
resulting from Coverity thinking that av_dict_set() automatically
frees its key and value parameters (even without the
AV_DICT_DONT_STRDUP_* flags).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Keep all the existing data fields as they are (there's lots and
lots of nontrivial calculation and heuristics based on them in
their current form), but derive the duration as the difference
between the pts of the first packet to the maximum pts+duration
(not necessarily the last packet); use this duration in any box
where the actual presentation duration is supposed to be.
Fixes: 8420
Signed-off-by: Martin Storsjö <martin@martin.st>
If the size of the input packet is zero, av_grow_packet() used to call
av_new_packet() which would initialize the packet and (in particular)
reset the pos field. This behaviour (which was never documented and
arguably always contradicted the documented behaviour) was changed in
2fe04630. This means that it is unnecessary to save and restore the
packet's position in append_packet_chunked().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes#8314.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Zane van Iperen
Marton Balint
Gyan Doshi
Andriy Gelman
Bela Bodecs
Xuchen Su
Steven Liu
Anthony Delannoy
Michael Niedermayer
Andreas Rheinhardt
James Almer
Nicolas Gaullier
Anton Khirnov
Alexandre Heitor Schmidt
Gilles Bouthenot
Martin Storsjö