The next pointer is kept at the end for backwards compatability until the
major bump, when it should ideally be moved at the front.
Signed-off-by: James Almer <jamrial@gmail.com>
And make it const, so the caller doesn't attempt to change it.
ff_get_muxer_ts_offset() should be used to get the muxer timestamp offset.
Signed-off-by: James Almer <jamrial@gmail.com>
Factor out the code into a separate muxing-specific function.
Stop accessing the deprecated AVStream-embedded codec context, use the
average framerate (if specified) instead.
Those are private fields, no reason to have them exposed in a public
header. Since there are some (semi-)public fields located after these,
even though this section is supposed to be private, keep some dummy
padding there until the next major bump to preserve ABI compatibility.
Since commit c5324d92c5 all custom
interleave_packet() functions always return clean packets (even on
error), so that unreferencing manually can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Call it directly from write_packets_common() instead of indirectly
through prepare_input_packet().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit stops using pkt->stream_index as index in an AVFormatContext's
streams array before actually comparing the value with the count of
streams in said array. 96e5e6abb9 used
pkt->stream_index in prepare_input_packet() before checking and
6406351222 did likewise in
write_packets_common().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Previously only 1:1 bitstream filters were supported, the end of the stream was
not signalled to the bitstream filters and time base changes were ignored.
This change also allows muxers to set up bitstream filters regardless of the
autobsf flag during write_header instead of during check_bitstream and those
bitstream filters will always be executed.
Signed-off-by: Marton Balint <cus@passwd.hu>
Current muxers only use a single bitstream filter, so there is no need to
maintain code which operates on a list of bitstream filters. When multiple
bitstream filters are needed muxers can simply use a list bitstream filter.
If there is a use case in the future when different bitstream filters should be
added at subsequent packets then a new API possibly involving reconfiguring the
list bitstream filter can be added knowing the exact requirements.
Signed-off-by: Marton Balint <cus@passwd.hu>
mux.c was split from utils.c in 55f9037f38
and during this split all headers were simply copied without checking if
they were only needed in the part that stayed in utils.c (or whether
these haeders were needed at all). As a result quite a lot of headers
in mux.c are unnecessary. This commit removes them.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When no packet could be output, the interleavement functions
nevertheless initialized the packet destined for output (with the
exception of the data and size fields, making the initialization
pointless), although it will not be used at all. So remove the
initializations.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
write_packet() currently saves the original timestamps of the packet it
got and restores them in case writing fails. This is unnecessary as we
are no longer working directly with the user-supplied AVPacket here; and
it is also pointless because the timestamps may already have been
altered before write_packet().
So remove this and add a general comment to the function that timestamps
may be modified; also remove a long outdated comment about side data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The documentation of av_write_frame() explicitly states that the function
doesn't take ownership of the packets sent to it; while av_write_frame()
does not directly unreference the packets after having written them, it
nevertheless modifies the packet in various ways:
1. The timestamps might be modified either by prepare_input_packet() or
compute_muxer_pkt_fields().
2. If a bitstream filter gets applied, it takes ownership of the
reference and the side-data in the packet sent to it.
In case of do_packet_auto_bsf(), the end result is that the returned packet
contains the output of the last bsf in the chain. If an error happens,
a blank packet will be returned; a packet may also simply not lead to
any output (vp9_superframe).
This also implies that side data needs to be really copied and can't be
shared with the input packet.
The method choosen here minimizes copying of data: When the input isn't
refcounted and no bitstream filter is applied, the packet's data will
not be copied.
Notice that packets that contain uncoded frames are exempt from this
because these packets are not owned by and returned to the user. This
also moves unreferencing the packets containing uncoded frames to
av_write_frame() in the noninterleaved codepath; in the interleaved
codepath, these packets are already freed in av_interleaved_write_frame(),
so that unreferencing the packets in write_uncoded_frame_internal() is
no longer needed. It has been removed.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Now that ff_interleave_add_packet() always returns blank packets, the
input packet to ff_interleave_packet_per_dts() will always be blank on
return as well (if supplied) and the same goes for interleave_packet()
in mux.c. Document these facts and remove the redundant resetting that
happened in av_interleaved_write_frame().
The last reference to the (long removed) destruct field that AVPackets
once had has been removed as well when updating the documentation of
ff_interleave_packet_per_dts().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When an error happened in ff_interleave_add_packet() when adding
a packet to the packet queue, said packet would not be unreferenced
in ff_interleave_add_packet(), but would be zeroed in
av_interleaved_write_frame(), which results in a memleak.
This has been fixed: ff_interleave_add_packet() now always unreferences
the input packet on error; as a result, it always returns blank packets
which has been documented. Relying on this a call to av_packet_unref()
in ff_audio_rechunk_interleave() can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If writing uncoded frames in noninterleaved mode fails at the preparatory
steps (i.e. before it reaches write_packet()), the packet would not be
unreferenced and the frame would leak. This is fixed by unreferencing
the packet in write_uncoded_frame_internal() instead.
This also makes it possible to remove the unreferencing in
write_packet() itself: In noninterleaved mode frames are now freed in
write_uncoded_frame_internal(), while they are freed in interleaved
mode when their containing packet gets unreferenced (like normal
packets).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Currently uncoded frames (i.e. packets whose data actually points to an
AVFrame) are not refcounted. As a consequence, calling av_packet_unref()
on them will not free them, but may simply make sure that they leak by
losing the pointer to the frame.
This commit changes this by actually making uncoded frames refcounted.
In order not to rely on sizeof(AVFrame) (which is not part of the public
API and so must not be used here in libavformat) the packet's data is
changed to a (padded) buffer containing just a pointer to an AVFrame.
Said buffer is owned by an AVBuffer with a custom free function that
frees the frame as well as the buffer. Thereby the pointer/the AVBuffer
owns the AVFrame.
Said ownership can actually be transferred by copying and resetting
the pointer, as might happen when actually writing the uncoded frames
in AVOutputFormat.write_uncoded_frame() (although currently no muxer
makes use of this possibility).
This makes packets containing uncoded frames compatible with
av_packet_unref(). This already has three advantages in interleaved mode:
1. If an error happens at the preparatory steps (before the packet is
put into the interleavement queue), the frame is properly freed.
2. If the trailer is never written, the frames still in the
interleavement queue will now be properly freed by
ff_packet_list_free().
3. The custom code for moving the packet to the packet list in
ff_interleave_add_packet() can be removed.
It will also simplify fixing further memleaks in future commits.
Suggested-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It is unnecessary to call prepare_input_packet if there is no packet as
it doesn't do anything, except when the currently inactive code guarded
by !FF_API_COMPUTE_PKT_FIELDS2 || !FF_API_LAVF_AVCTX becomes active:
Then attempting to access pkt->stream_index will crash.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If writing a packet didn't directly return an error, the AVIOContext's
error flag is checked for errors (if existing) by write_packet(). And if
write_packet() didn't indicate an error, its callers checked the error
flag of the AVIOContext (if existing). The latter check is redundant.
The reason for checking twice lies in the FFmpeg-Libav split: The check
in write_packet() has been added in 9ad1e0c1 in Libav. FFmpeg already
had the other checks (since aec9390a), but when 9ad1e0c1 was merged
(in 1f1c1008), no one noticed the redundant checks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
If no error occurs and this AVPacketList is used at all, its packet
substructure will be overwritten and its next pointer explicitly set, so
every field will still be initialized even when using av_malloc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In the common case that the input packet was already refcounted,
ff_interleave_add_packet would allocate a new AVPacketList, use
av_packet_ref to create a new reference to the buffer for the
AVPacketList's packet, interleave the packet and finally unreference
the original input packet.
This commit changes this: It uses av_packet_move_ref to transfer
the packet to its destination. In case the input packet is refcounted,
this saves an allocation and a free (of an AVBufferRef); if not, the
packet is made refcounted before moving it. When the input packet has
side data, one saves even more than one allocation+free.
Furthermore, when the packet is in reality an uncoded frame, a hacky
ad-hoc variant of av_packet_move_ref has been employed. Not any more.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Despite the doxy stating that it's called when the muxer is destroyed,
this was not true in practice. It's only called by av_write_trailer()
and on init() failure.
An AVFormatContext may be closed without writing the trailer if errors
ocurred while muxing packets, so in order to prevent memory leaks, it
should effectively be called when freeing the muxer.
Signed-off-by: James Almer <jamrial@gmail.com>
ff_write_chained essentially duplicated the functionality of
av_packet_rescale_ts. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There is no reason for these functions to modify the given packets at
all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Commit 31f9032b added the audio_preload feature; its goal is to
interleave audio earlier than the rest. Unfortunately, it has never ever
worked, because the check for whether a packet should be interleaved
before or after another packet was completely wrong: When audio_preload
vanishes, interleave_compare_dts returns 1 if the new packet should be
interleaved earlier than the packet it is compared with and that is what
the rest of the code expects. But the codepath used when audio_preload is
set does the opposite.
Also fixes potential undefined behaviour (namely signed integer
overflow).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
Every bitstream filter behaves as intended now, so there's no need to
wait for the first packet of every stream.
Signed-off-by: James Almer <jamrial@gmail.com>
It has no reason to be in a public header, even if defined as private.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This makes the autobsf feature behave the same as the manual
bitstream filtering in ffmpeg.c
Fixes ticket #6794
Reviewed-by: rcombs
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
If flushing is not disabled, then mux.c will signal the end of the packets with
an AVIO_DATA_MARKER_FLUSH_POINT, and aviobuf will be able to decide to flush or
not based on the preferred minimum packet size set by the used protocol.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
James Almer
Anton Khirnov
Andreas Rheinhardt
Marton Balint
Limin Wang
Gyan Doshi
Carl Eugen Hoyos