For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
Current code prefers deprecated AVFrame.pkt_duration over its
replacement AVFrame.duration whenever the former is set and not equal to
the latter. However, duration will only be actually used when the
caller sets the AV_CODEC_FLAG_FRAME_DURATION flag, which was added
_after_ AVFrame.duration.
This implies that any caller aware of AV_CODEC_FLAG_FRAME_DURATION is
also aware of AVFrame.duration. pkt_duration should then never be used.
Frame counters can overflow relatively easily (INT_MAX number of frames is
slightly more than 1 year for 60 fps content), so make sure we use 64 bit
values for them.
Also deprecate the old 32 bit frame_number attribute.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is intended to be a more convenient replacement for
reordered_opaque.
Add support for it in the two encoders that offer
AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE: libx264 and libx265. Other
encoders will be supported in future commits.
Some encoders (ffv1, flac, adx) are marked with AV_CODEC_CAP_DELAY onky
in order to be flushed at the end, otherwise they behave as no-delay
encoders.
Add a capability to mark these encoders. Use it for setting pts
generically.
Now that it is ensured that the old and new channel count/layout
values coincide if the old ones are set, the consistency of the
AVChannelLayout (which is checked before we reach this point)
implies the consistency of the old values, making these checks
here dead code. So remove them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, check the provided channel layout for encoders
without AVCodec.ch_layouts set. This fixes an infinite loop
in the WavPack encoder (and maybe other issues in other encoders
as well) in case the channel count is zero.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The wrapper for the legacy channel layout API already sets
AVCodecContext.channels based upon AVCodecContext.channel_layout
if the latter is set while the former is unset.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Some audio codecs work with atomic units that decode to a fixed
number of audio samples with this number being so small that it is
common to put multiple of these atoms into one packet. In these
cases it makes no sense to pad the last frame to the big frame_size,
so allow encoders to set the number of samples that they want
the last frame to be padded to instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, check that there is only one small last frame
in case the encoder has the AV_CODEC_CAP_SMALL_LAST_FRAME set.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the frame-threaded decoding API still supports thread-unsafe
callbacks. If one uses a thread-unsafe get_buffer2() callback,
calls to av_frame_unref() by the decoder are serialized, because
it is presumed that the underlying deallocator is thread-unsafe.
The frame-threaded encoder seems to have been written with this
restriction in mind: It always serializes unreferencing its AVFrames,
although no documentation forces it to do so.
This commit schedules to change this behaviour as soon as thread-unsafe
callbacks are removed. For this reason, the FF_API_THREAD_SAFE_CALLBACKS
define is reused.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, these encoders received non-refcounted packets
(whose data was owned by the corresponding AVCodecContext)
from ff_alloc_packet(); these packets were made refcounted lateron
by av_packet_make_refcounted() generically.
This commit makes these encoders accept user-supplied buffers by
replacing av_packet_make_refcounted() with an equivalent function
that is based upon get_encode_buffer().
(I am pretty certain that one can also set the flag for mpegvideo-
based encoders, but I want to double-check this later. What is certain
is that it reallocates the buffer owned by the AVCodecContext
which should maybe be moved to encode.c, so that proresenc_kostya.c
and ttaenc.c can make use of it, too.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The encode-callback (the callback used by the FF_CODEC_CB_TYPE_ENCODE
encoders) is currently called in two places: encode_simple_internal()
and by the worker threads of frame-threaded encoders.
After the call, some packet properties are set based upon
the corresponding AVFrame properties and the packet is made
refcounted if it isn't already. So there is some code duplication.
There was also non-duplicated code in encode_simple_internal()
which is executed even when using frame-threading. This included
an emms_c() (which is needed for frame-threading, too, if it is
needed for the single-threaded case, because there are allocations
(via av_packet_make_refcounted()) immediately after returning
from the encode-callback).
Furthermore, some further properties are only set in
encode_simple_internal(): For audio, pts and duration are derived
from the corresponding fields of the frame if the encoder does not
have the AV_CODEC_CAP_DELAY set. Yet this is wrong for frame-threaded
encoders, because frame-threading always introduces delay regardless
of whether the underlying codec has said cap. This only worked because
there are no frame-threaded audio encoders.
This commit fixes the code duplication and the above issue by factoring
this code out and reusing it in both places. It would work in case
of audio codecs with frame-threading, because now the values are
derived from the correct AVFrame.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVCodecInternal.frame_thread_encoder is only set iff
active_thread_type is FF_THREAD_FRAME.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only if requested, and only if the codec signals support for ICC
profiles. Implementation roughly matches the functionality of the
existing vf_iccgen filter, albeit with some reduced flexibility and no
caching.
Ideally, we'd also only do this on the first frame (e.g. mjpeg, apng),
but there's no meaningful way for us to distinguish between this case
and e.g. somebody using the image2 muxer, in which case we'd want to
attach ICC profiles to every frame in the stream.
Closes: #9672
Signed-off-by: Niklas Haas <git@haasn.dev>
encode_send_frame_internal() is always only called if
the buffer packet is empty and except when we are dealing
with an audio codec that does not allow variable frame size
it stays that way until a call to av_frame_ref() at the end
of encode_send_frame_internal(). In case we are dealing
with the small last frame of an audio encoder requiring
constant frame size the frame will be allocated by pad_last_frame()
and this the only case where this is so. So by returning directly
after pad_last_frame(), we can avoid having to recheck
whether the frame is still empty before av_frame_ref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Several encoders (roqvideo, svq1, snow, and the mpegvideo family)
currently call ff_get_buffer(). However this function is written
assuming it is called by a decoder. Though nothing has been obviously
broken by this until now, that may change in the future.
To avoid potential future issues, introduce a simple encode-specific
wrapper around avcodec_default_get_buffer2() and enforce its use in
encoders.
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since the request_channel_layout is used only by a handful of codecs,
move the option to codec private contexts.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
Currently, the AV_PKT_FLAG_KEY is automatically set for audio encoders;
yet this is wrong, as both MLP and TrueHD have non-keyframes. So set it
based upon AV_CODEC_PROP_INTRA_ONLY (from the corresponding
AVCodecDescriptor) instead. This also sets it for some video codecs,
which is intended.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, ff_alloc_packet2() has a min_size parameter:
It is supposed to be a lower bound on the final size of the packet
to allocate. If it is not too far from the upper bound (namely,
if it is at least half the upper bound), then ff_alloc_packet2()
already allocates the final, already refcounted packet; if it is
not, then the packet is not refcounted and its data only points to
a buffer owned by the AVCodecContext (in this case, the packet will
be made refcounted in encode_simple_internal() in libavcodec/encode.c).
The goal of this was to avoid data copies and intermediate buffers
if one has a precise lower bound.
Yet those encoders for which precise lower bounds exist have recently
been switched to ff_get_encode_buffer() (which automatically allocates
final buffers), leaving only two encoders to actually set the min_size
to something else than zero (namely aliaspixenc and hapenc). Both of
these encoders use a very low lower bound that is not helpful in any
nontrivial case.
This commit therefore removes the min_size parameter as well as the
codepath in ff_alloc_packet2() for the allocation of final buffers.
Furthermore, the function has been renamed to ff_alloc_packet() and
moved to encode.h alongside ff_get_encode_buffer().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Deprecated in commits 7fc329e2dd
and 31f6a4b4b8.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in 40cf1bbacc.
(The currently disabled filter vf_mcdeint and vf_uspp were users of
this field; they have not been changed, so that whoever wants to fix
them can see the state of these filters when they were disabled.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Anton Khirnov
James Almer
Marton Balint
Andreas Rheinhardt
Niklas Haas
Vittorio Giovara