avcodec_enum_to_chroma_pos() and avcodec_chroma_pos_to_enum()
deal with enum AVChromaLocation which is defined in lavu.
These functions are therefore replaced by
av_chroma_location_enum_to_pos() and av_chroma_location_pos_to_enum().
This commit provides the necessary deprecations. Also already make
these functions wrappers around the corresponding lavu functions
as not doing so would force one to disable deprecation warnings.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are also frequently used in libavformat.
This change does not cause any breakage as avcodec.h
includes defs.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
this maps to the vpxenc argument with the same name and the
VP9E_SET_MIN_GF_INTERVAL codec control
Signed-off-by: James Zern <jzern@google.com>
Reviewed-by: Vignesh Venkatasubramanian <vigneshv@google.com>
With the necessary pixel formats defined, we can now expose support for
the remaining 10/12bit combinations that VAAPI can handle.
Specifically, we are adding support for:
* HEVC
** 12bit 420
** 10bit 422
** 12bit 422
** 10bit 444
** 12bit 444
* VP9
** 10bit 444
** 12bit 444
These obviously require actual hardware support to be usable, but where
that exists, it is now enabled.
Note that unlike YUVA/YUVX, the Intel driver does not formally expose
support for the alphaless formats XV30 and XV360, and so we are
implicitly discarding the alpha from the decoder and passing undefined
values for the alpha to the encoder. If a future encoder iteration was
to actually do something with the alpha bits, we would need to use a
formal alpha capable format or the encoder would need to explicitly
accept the alphaless format.
As vaapi doesn't actually do anything useful with the alpha channel,
and we have an alphaless format available, let's use that instead.
The changes here are mostly 1:1 switching, but do note the explicit
change in the number of declared channels from 4 to 3 to reflect that
the alpha is being ignored.
Sufficiently recent Intel hardware is able to do encoding of 8bit 4:4:4
content in HEVC and VP9. The main requirement here is that the frames
must be provided in the AYUV format.
Enabling support is done by adding the appropriate encoding profiles
and noting that AYUV is officially a four channel format with alpha so
we must state that we expect all four channels.
Now that we have a combination of capable hardware (new enough Intel)
and a mutually understood format ("AYUV"), we can declare support for
decoding 8bit 4:4:4 content via VAAPI.
This requires listing AYUV as a supported format, and then adding VAAPI
as a supported hwaccel for the relevant codecs (HEVC and VP9). I also
had to add VP9Profile1 to the set of supported profiles for VAAPI as it
was never relevant before.
This functionally already exists, but as pointed out in #9672 and #9673,
requiring users to manually include filters is clumsy, error-prone and
hard to use together with tools like ffplay.
To streamline ICC profile support, add a new AVCodecContext flag to
globally enable reading and writing ICC profiles, automatically, for all
appropriate media types.
Note that this commit only includes the new API. The implementation is
split off to separate commits for readability.
Signed-off-by: Niklas Haas <git@haasn.dev>
Required by MP4's AC3SpecificBox and MPEG-TS AC-3 audio_descriptor,
of which the former is implemented in our MP4 writer.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Support for VDPAU accelerated AV1 decoding was added with libvdpau-1.5.
Support for the same in ffmpeg is added with this patch. Profiles
related to VDPAU AV1 can be found in latest vdpau.h present in
libvdpau-1.5.
Add AV1 VDPAU to list of hwaccels and supported formats
Added file vdpau_av1.c and Modified configure to add VDPAU AV1 support.
Mapped AV1 profiles to VDPAU AV1 profiles. Populated the codec specific
params that need to be passed to VDPAU.
Signed-off-by: Philip Langdale <philipl@overt.org>
libaom added an usage=allintra mode for doing better with still
images. Expose that in the ffmpeg's wrapper. This is especially
useful for encoding still AVIF images.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When target levels are set, this patch checks whether they are
satisfied by libaom. If not, a warning is shown. Otherwise the output
levels are also logged.
This patch applies basically the same approach used for libvpx.
Signed-off-by: Bohan Li <bohanli@google.com>
Signed-off-by: James Zern <jzern@google.com>
This commit removes the ineffective FF_MPV_DEPRECATED_ options,
namely mpeg_quant (this is only an option for MPEG-4), a53cc
(this is only an option for MPEG-2), force_duplicated_matrix
(applies only to MJPEG) and b_strategy, b_sensitivity and brd_scale
(these options only make sense for encoders supporting B-frames,
which currently means the MPEG-1/2 and MPEG-4 encoders).
Given that these options never changed the outcome of encoding,
they are removed at once.
Notice that the options for the encoders for which it made sense
are not affected by this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
(M)JPEG does not use motion estimation/motion vectors at all.
These options therefore don't affect the output at all.
So remove them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The user-provided value is overwritten in ff_mpv_encode_init()
without having ever been read.
(This has been broken when making these options mpegvideo-specific
in commits 910247f172 and
cf7d2f2d21. No one has ever complained,
so this commit removes these fields.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Required to remux m2ts to mkv
Minor changes and porting to FFBitStreamFilter done by the committer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also bump the minor versions of all libraries, to signify the
API change of splitting the version.h headers and adding the
new version_major.h header.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids including version.h in all source files, avoiding
unnecessary rebuilds when the version number is bumped. Only
version_major.h is included by the main header, which defines
availability of e.g. FF_API_* macros, and which is bumped much
less often.
This isn't done for libavutil/version.h, because that header needs
to be included essentially everywhere due to LIBAVUTIL_VERSION_INT
being used wherever an AVClass is constructed.
Signed-off-by: Martin Storsjö <martin@martin.st>
From the wiki page (https://wiki.vexatos.com/dfpwm):
> DFPWM (Dynamic Filter Pulse Width Modulation) is an audio codec
> created by Ben “GreaseMonkey” Russell in 2012, originally to be used
> as a voice codec for asiekierka's pixmess, a C remake of 64pixels.
> It is a 1-bit-per-sample codec which uses a dynamic-strength one-pole
> low-pass filter as a predictor. Due to the fact that a raw DPFWM decoding
> creates a high-pitched whine, it is often followed by some post-processing
> filters to make the stream more listenable.
It has recently gained popularity through the ComputerCraft mod for
Minecraft, which added support for audio through this codec, as well as
the Computronics expansion which preceeded the official support. These
both implement the slightly adjusted 1a version of the codec, which is
the version I have chosen for this patch.
This patch adds a new codec (with encoding and decoding) for DFPWM1a.
The codec sources are pretty simple: they use the reference codec with
a basic wrapper to connect it to the FFmpeg AVCodec system.
To clarify, the codec does not have a specific sample rate - it is
provided by the container (or user), which is typically 48000, but has
also been known to be 32768. The codec does not specify channel info
either, and it's pretty much always used with one mono channel.
However, since it appears that libavcodec expects both sample rate and
channel count to be handled by either the codec or container, I have
made the decision to allow multiple channels interleaved, which as far
as I know has never been used, but it works fine here nevertheless. The
accompanying raw format has a channels option to set this. (I expect
most users of this will not use multiple channels, but it remains an
option just in case.)
This patch will be highly useful to ComputerCraft developers who are
working with audio, as it is the standard format for audio, and there
are few user-friendly encoders out there, and even fewer decoders. It
will streamline the process for importing and listening to audio,
replacing the need to write code or use tools that require very
specific input formats.
You may use the CraftOS-PC program (https://www.craftos-pc.cc) to test
out DFPWM playback. To use it, run the program and type this command:
"attach left speaker" Then run "speaker play <file.dfpwm>" for each file.
The app runs in a sandbox, so files have to be transferred in first;
the easiest way to do this is to simply drag the file on the window.
(Or copy files to the folder at https://www.craftos-pc.cc/docs/saves.)
Sample DFPWM files can be generated with an online tool at
https://music.madefor.cc. This is the current best way to encode DFPWM
files. Simply drag an audio file onto the page, and it will encode it,
giving a download link on the page.
I've made sure to update all of the docs as per Developer§7, and I've
tested it as per section 8. Test files encoded to DFPWM play correctly
in ComputerCraft, and other files that work in CC are correctly decoded.
I have also verified that corrupt files do not crash the decoder - this
should theoretically not be an issue as the result size is constant with
respect to the input size.
Signed-off-by: Jack Bruienne <jackbruienne@gmail.com>
They correspond to the relevant fields from the packet that follows the
one where the expressions are being applied.
Signed-off-by: James Almer <jamrial@gmail.com>
This is done a second time for 5.0 because master was
merged into 5.0 so that it contains the recent DOVI additions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of user data unregistered SEIs are privated data which defined by user/
encoder. currently, the user data unregistered SEIs found in input are forwarded
as side-data to encoders directly, it'll cause the reencoded output including some
useless UDU SEIs.
I prefer to add one option to enable/disable it and default is off after I saw
the patch by Andreas Rheinhardt:
https://patchwork.ffmpeg.org/project/ffmpeg/patch/AM7PR03MB66607C2DB65E1AD49D975CF18F7B9@AM7PR03MB6660.eurprd03.prod.outlook.com/
How to test by cli:
ffmpeg -y -f lavfi -i testsrc -c:v libx264 -frames:v 1 a.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 1 b.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 0 c.ts
# check the user data unregistered SEIs, you'll see two UDU SEIs for b.ts.
# and mediainfo will show with wrong encoding setting info
ffmpeg -i b.ts -vf showinfo -f null -
ffmpeg -i c.ts -vf showinfo -f null -
This fixes tickets #9500 and #9557.
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Paul B Mahol
Andreas Rheinhardt
James Zern
Philip Langdale
James Almer
Peter Ross
Anton Khirnov
Niklas Haas
Michael Niedermayer
Jan Ekström
ManojGuptaBonda
Vignesh Venkatasubramanian
Bohan Li
John Stebbins
Leo Izen
Marton Balint
Danil Chapovalov
Martin Storsjö
Jack Bruienne
Limin Wang