The SAR of the input could have a numerator or denominator greater than
2^16 which would then be truncated to a 16-bit integer when written to
the VUI parameters, giving a random result. Instead, reduce the SAR to
the nearest representable fraction.
Fixes#7502.
A recent version of the standard changed the max and default to 15, from
16 in older versions. This updates the default to 15 to match, but the
max stays as 16 so that we don't reject older streams.
constraint_set1_flag should be set for constrained baseline and main
profiles, because the stream conforms to main profile.
constraint_set3_flag should be set for high profile when the stream
is intra-only.
constraint_set4_flag should always be set for main and high profiles
because interlaced encoding is not supported.
constraint_set5_flag should be set for main and high profiles when
B-frames are not used.
Also fix the setting of max_num_ref_frames - use the gop_size value
to check for intra-only rather than the constraint flag (which is not
necessarily set).
Add a larger warning more clearly explaining the consequences of missing
packed header support in the driver. Also only write the extradata if the
user actually requests it via the GLOBAL_HEADER flag.
Choose what types of reference frames will be used based on what types
are available, and make the intra-only mode explicit (GOP size one,
which must be used for MJPEG).
This was added in libva 2.1.0 (VAAPI 1.1.0). Use AVCodecContext.qmax,
matching the existing behaviour for qmin, and clean up the defaults so
that we only pass min/max when explicitly set.
Query which modes are supported and select between VBR and CBR based
on that - this removes all of the codec-specific rate control mode
selection code.
Previously there was one fixed choice for each codec (e.g. H.265 -> Main
profile), and using anything else then required an explicit option from
the user. This changes to selecting the profile based on the input format
and the set of profiles actually supported by the driver (e.g. P010 input
will choose Main 10 profile for H.265 if the driver supports it).
The entrypoint and render target format are also chosen dynamically in the
same way, removing those explicit selections from the per-codec code.
This makes it easier for users of the CBS API to get alloc/free right -
all subelements use the buffer API so that it's clear how to free them.
It also allows eliding some redundant copies: the packet -> fragment copy
disappears after this change if the input packet is refcounted, and more
codec-specific cases are now possible (but not included in this patch).
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
From ffmpeg commit f31478ba14.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
With pre-2.0 Intel drivers in CBR mode, if an explicit SEI message with
the old (now deprecated) type is not included, the driver generates and
inserts some timing SEI which is almost certainly invlaid. Before
7a4fac5e91 we always inserted our own SEI
so this would not be visible, but since then it has been possible to
disable that. We would also like to avoid using the deprecated type,
and using the new type, while working in old drivers, does not suppress
the spurious message like the old type does.
Therefore, suppress the bad SEI insertion by providing a zero-length
buffer with the old type, which the driver can insert harmlessly.
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
Follow libx264 style to support "coder" option, and set it to
cabac by default.
Signed-off-by: Yi A Wang <yi.a.wang@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
(cherry picked from commit 19388a7200)
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
The non-H.26[45] codecs already use this form. Since we don't
currently generate I frames for codecs which support them separately
to IDR, the p_per_i variable is set to infinity by default so that it
doesn't interfere with any other calculation. (All the code for I
frames still exists, and it works for H.264 if set manually.)
(cherry picked from commit 6af014f402)
The non-H.26[45] codecs already use this form. Since we don't
currently generate I frames for codecs which support them separately
to IDR, the p_per_i variable is set to infinity by default so that it
doesn't interfere with any other calculation. (All the code for I
frames still exists, and it works for H.264 if set manually.)
Default to using VBR when a target bitrate is set, unless the max rate
is also set and matches the target. Changes to the Intel driver mean
that min_qp is also respected in this case, so set a codec default to
unset the value rather than using the current default inherited from
the MPEG-4 part 2 encoder.
(cherry picked from commit eddfb57210)
Before this change, it was possible to overflow pic_order_cnt_lsb and
generate a stream with invalid POC numbering. This makes sure that
the field is large enough that a single IDR B* P sequence uses fewer
than half the available POC lsb values.
(cherry picked from commit 89725a8512)
Default to using VBR when a target bitrate is set, unless the max rate
is also set and matches the target. Changes to the Intel driver mean
that min_qp is also respected in this case, so set a codec default to
unset the value rather than using the current default inherited from
the MPEG-4 part 2 encoder.
Before this change, it was possible to overflow pic_order_cnt_lsb and
generate a stream with invalid POC numbering. This makes sure that
the field is large enough that a single IDR B* P sequence uses fewer
than half the available POC lsb values.
Mark Thompson
Haihao Xiang
wm4
Jun Zhao