These are the formats we want/need to use when dealing with the Intel
VAAPI decoder for 12bit 4:2:0, 12bit 4:2:2, 10bit 4:4:4 and 12bit 4:4:4
respectively.
As with the already supported Y210 and YUVX (XVUY) formats, they are
based on formats Microsoft picked as their preferred 4:2:2 and 4:4:4
video formats, and Intel ran with it.
P12 and Y212 are simply an extension of 10 bit formats to say 12 bits
will be used, with 4 unused bits instead of 6.
XV30, and XV36, as exotic as they sound, are variants of Y410 and Y412
where the alpha channel is left formally undefined. We prefer these
over the alpha versions because the hardware cannot actually do
anything with the alpha channel and respecting it is just overhead.
Y412/XV46 is a normal looking packed 4 channel format where each
channel is 16bits wide but only the 12msb are used (like P012).
Y410/XV30 packs three 10bit channels in 32bits with 2bits of alpha,
like A/X2RGB10 style formats. This annoying layout forced me to define
the BE version as a bitstream format. It seems like our pixdesc
infrastructure can handle the LE version being byte-defined, but not
when it's reversed. If there's a better way to handle this, please
let me know. Our existing X2 formats all have the 2 bits at the MSB
end, but this format places them at the LSB end and that seems to be
the root of the problem.
There are no particular reasons to force the compiler to use the same
register as output and input operand. This forces an extra MOV
instruction if the input value needs to be reused after the swap.
In most cases, this makes no differences, as the compiler will seleect
the same register for both operands either way.
Signed-off-by: Martin Storsjö <martin@martin.st>
There are no particular reasons to force the compiler to use the same
register as output and input operand. This forces an extra MOV
instruction if the input value needs to be reused after the swap.
In most cases, this makes no differences, as the compiler will seleect
the same register for both operands either way.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is advantageous for ff_crop_tab, as the base pointer used to
access this table is not the first element of it. But the real
base pointer is still at a constant offset from the code/the GOT
and can therefore be accessed relative to the instruction pointer
(if supported by the arch) or relative to the GOT; without this,
one has to first load address of ff_crop_tab (potentially via
the GOT) and then offset manually (which is what the earlier code
did).
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 11 callbacks
that exceeded the 80 char line length limit; now there are zero.
It also allows to remove ONLY_IF_THREADS_ENABLED() in
libavutil/internal.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been deprecated in b4f59beeb4,
but the attribute_deprecated was not set and there was no entry
in APIchanges. This commit adds these and schedules it for removal.
Given that the reason behind the deprecation is exactly the same
as in av_fopen_utf8(), reuse its FF_API_AV_FOPEN_UTF8.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are unused since d63443b968.
Furthermore, they were always in the wrong header:
libavutil/internal.h is auto-included almost everywhere, but
FF_SYMVER would only ever be used at a few places, so a proper
header of its own would be appropriate for it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the frame-threaded decoding API still supports thread-unsafe
callbacks. If one uses a thread-unsafe get_buffer2() callback,
calls to av_frame_unref() by the decoder are serialized, because
it is presumed that the underlying deallocator is thread-unsafe.
The frame-threaded encoder seems to have been written with this
restriction in mind: It always serializes unreferencing its AVFrames,
although no documentation forces it to do so.
This commit schedules to change this behaviour as soon as thread-unsafe
callbacks are removed. For this reason, the FF_API_THREAD_SAFE_CALLBACKS
define is reused.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AArch64 assembly accesses those symbols directly, without
indirection via e.g. the GOT on ELF. In order for this not to
require text relocations, those symbols need to be resolved fully
at link time, i.e. those symbols can't be interposable.
Normally, so far, this is achieved when linking shared libraries
in two ways; we have a version script (libavcodec/libavcodec.v) which
marks all symbols that don't start with av* as local. Additionally,
we try to add -Wl,-Bsymbolic to the linker options if supported,
making sure that such symbol references are resolved fully at link
time, instead of making them interposable.
When the libavcodec static library is linked into another shared
library, there's no guarantee that it uses similar options (even though
that would be favourable), which would end up requiring text relocations
in the AArch64 assembly.
Explicitly mark the symbols that are accessed from AArch64 assembly
as hidden, so that they are resolved fully at link time even without
the version script and -Wl,-Bsymbolic.
Signed-off-by: Martin Storsjö <martin@martin.st>
It makes no sense here, as flac_parse_block_header()
is not even supposed to advance the caller's pointer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
(The FLAC parser currently ignores the streaminfo block;
therefore some of this is decoder-only. Given that the FLAC
parser should probably use the streaminfo block, this stuff
is moved to flac_parse.h.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This field is not really used by the decoder at all:
It is only output in some debug log message, but this debug
log message should better use the value read from the streaminfo
instead of a second-guessed value from the decoder.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC code currently uses an array of arrays of NALUs; one such array
contains all the SPS NALUs, one all PPS NALUs etc. The array of arrays
is grown dynamically via av_reallocp_array(), but given that the latter
function automatically frees its buffer upon reallocation error,
it may only be used with PODs, which this case is not. Even worse:
While the pointer to the arrays is reset, the counter for the number
of arrays is not, leading to a segfault in hvcc_close().
Fix this by avoiding the allocations of the array of arrays altogether.
This is easily possible because their number is bounded (by five).
Furthermore, as a byproduct we can ensure that the code always
produces the recommended ordering of VPS-SPS-PPS-SEI (which was
not guaranteed before).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access
Fixes: 47911/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BINK_fuzzer-6194020855971840
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is designed to improve and unify error handling for
allocation failures for the many (often small) allocations that we have
in the fftools. These typically either don't return an error message
or an error message that is not really helpful to the user
and can be replaced by a generic error message without loss of
information.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The threshold of 5 is arbitrary, both smaller and larger should work fine
Fixes: Stack overflow
Fixes: 50603/clusterfuzz-testcase-minimized-ffmpeg_dem_ASF_O_fuzzer-6049302564175872
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
update_video_stats() currently uses OutputStream.data_size to print the
total size of the encoded stream so far and the average bitrate.
However, that field is updated in the muxer thread, right before the
packet is sent to the muxer. Not only is this racy, but the numbers may
not match even if muxing was in the main thread due to bitstream
filters, filesize limiting, etc.
Introduce a new counter, data_size_enc, for total size of the packets
received from the encoder and use that in update_video_stats(). Rename
data_size to data_size_mux to indicate its semantics more clearly.
No synchronization is needed for data_size_mux, because it is only read
in the main thread in print_final_stats(), which runs after the muxer
threads are terminated.
It is either equal to OutputStream.enc_ctx->codec, or NULL when enc_ctx
is NULL. Replace the use of enc with enc_ctx->codec, or the equivalent
enc_ctx->codec_* fields where more convenient.
ost->enc is always non-NULL here, since
- this code is never called for streamcopy
- opening the output file will fail if an encoder cannot be found, so
filters are never initialized
This code cannot be triggered, since after 90944ee3ab opening the
output file will abort if an encoder cannot be found and streamcopy was
not explicitly requested.
It races with the demuxing thread. Instead, send the information along
with the demuxed packets.
Ideally, the code should stop using the stream-internal parsing
completely, but that requires considerably more effort.
Fixes races, e.g. in:
- fate-h264-brokensps-2580
- fate-h264-extradata-reload
- fate-iv8-demux
- fate-m4v-cfr
- fate-m4v
Philip Langdale
Rémi Denis-Courmont
Andreas Rheinhardt
Timo Rothenpieler
Mohamed Khaled Mohamed
Paul B Mahol
Martin Storsjö
Michael Niedermayer
Carl Eugen Hoyos
Anton Khirnov