The qtrle encoder allocates several buffers and an AVFrame in its init
function. If one of these allocations fails, but others succeed, the
successfully allocated objects leak. This is fixed by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Now that ff_ffv1_close() is called upon failure for both the FFV1 encoder
and decoder, the code contained therein can be used to free the partially
allocated slice contexts if allocating the slice contexts failed. One just
has to set the correct number of slice contexts on error. This allows to
remove the code for freeing partially allocated slice contexts in
ff_ffv1_init_slice_contexts().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The FFV1 encoder has so far not cleaned up after itself in this case;
but it can be done easily by setting the FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When allocating FFV1 slice contexts fails, ff_ffv1_init_slice_contexts()
frees everything that it has allocated, yet it does not reset the
counter for the number of allocated slice contexts. This inconsistent
state leads to segfaults lateron in ff_ffv1_close(), because said
function presumes that the slice contexts have been allocated.
Fix this by making sure that the number of slice contexts on error is
consistent (namely zero).
(This issue only affected the FFV1 decoder, because the encoder does not
clean up after itself on init failure.)
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Musepack decoder uses static VLC tables to parse the bitstream.
There are 14 different quant tables VLCs and each of them has a varying
number of codes. The maximum number is 63, the average number is 25.3.
Up until now, the array containing the raw data was of type
uint16_t [7][2][64 * 2] (the 14 tables come in pairs of two, hence [7][2]
instead of [14]) and from this it follows that there were large gaps in
said array. This commit changes this by making it a continuous array
instead. Doing so saves about 2KB.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
For the VLC table arrays in mpc7_decode_init() this fixes
a regression introduced in 1e40dc920a.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It can't if one hasn't made a mistake at calculating the sizes;
and this is checked by asserts/aborts.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MobiClip decoder uses adjacent pixels for prediction; yet when
accessing the left pixel, it was forgotten to clip the x coordinate.
This results in an heap-buffer-overflow. It can e.g. be reproduced with
the sample from https://samples.ffmpeg.org/V-codecs/MOHD/crap.avi when
forcing the video decoder to mobiclip.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If an error happens during init after an allocation has succeeded,
the already allocated data leaked up until now. Fix this by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ff_ivi_init_planes() might error out after having allocated some arrays.
Set the FF_CODEC_CAP_INIT_CLEANUP flag in order to free these arrays in
this case.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If allocating the tiles array for indeo 4/5 fails, the context is in an
inconsistent state, because the counter for the number of tiles is > 0.
This will lead to a segfault when freeing the tiles' substructures.
Fix this by setting the number of tiles to zero if the allocation was
unsuccessful.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If an error happens during init after an allocation has succeeded,
the already allocated data leaked up until now. Fix this by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If an error happens during init after an allocation has succeeded,
the already allocated data leaked up until now. Fix this by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one of several allocations the gif encoder performs in its init
function fails, the successful allocations leak. Fix this by adding the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The dsicinvideo decoder already has the FF_CODEC_CAP_INIT_CLEANUP flag
set, so it is unnecessary to directly clean up some already allocated
buffers in case another one could not be allocated in the init function,
as all buffers will be freed anyway later in the decoder's close
function.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If ff_codec_open2_recursive() fails, the already allocated
AVCodecContext leaks. Fix this by setting the FF_CODEC_CAP_INIT_CLEANUP
flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Keeping only the latest packet fed to the decoder works only for decoders that
return a frame immediately after every consumed packet. Decoders that consume
several packets before they return a frame will fill said frame with properties
taken from the last consumed packet instead of the earliest.
Signed-off-by: James Almer <jamrial@gmail.com>
And replace the flags parameter with a function callback that can be used to
copy the contents of the packet (e.g, av_packet_ref and av_packet_copy_props).
Signed-off-by: James Almer <jamrial@gmail.com>
The CineForm HD encoder attempts to allocate several buffers in its init
function; yet if only some of these allocations succeed, the
successfully allocated buffers leak. This is fixed by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fill the array with the software pix_fmt and move the avctx->hwaccel
check back to the proper place.
Also remove the avoid probing flag to ensure an external av1 decoder
will not set a pix_fmt we don't want during format probing.
Signed-off-by: James Almer <jamrial@gmail.com>
Let the internal decoder take care of it, as frame reordering
may result in different values exported by either module.
Signed-off-by: James Almer <jamrial@gmail.com>
This AV1 decoder is currently only used for hardware accelerated decoding.
It can be extended into a native decoder in the future, so set its name to
"av1" and temporarily give it the lowest priority in the codec list.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: -2.4187e+09 is outside the range of representable values of type 'int'
Fixes: signed integer overflow: -14512205 + -2147483648 cannot be represented in type 'int'
Fixes: 20492/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPC7_fuzzer-5747263166480384
Fixes: 23528/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MPC7_fuzzer-5747263166480384
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: index -1 out of bounds for type 'const uint8_t [6][16]'
Fixes: out of array read
Fixes: shift exponent -21 is negative
Fixes: 25422/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MOBICLIP_fuzzer-5748258226569216
Fixes: shift exponent 8039082 is too large for 32-bit type 'int'
Fixes: 25430/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MOBICLIP_fuzzer-5698567770210304
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Andreas Rheinhardt
Michael Niedermayer
Paul B Mahol
James Almer
Mark Reid
Marton Balint
Fei Wang