Not starting a new segment if the elapsed microsecs since the start of the day
equals the the elapsed microsecs since the start of the day at the time of the
last cut seems plain wrong to me, Deti do you remember the original reason
behind this check?
Signed-off-by: Marton Balint <cus@passwd.hu>
Retain the ranges of frame indexes when applying edit list in
mov_fix_index. The index ranges are then used to keep track of the frame
index of the current sample. In case of a discontinuity in frame indexes
due to edit, update the auxiliary info position accordingly.
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Allows the user to reserve space for the ODML master index. A sufficient
sized master index in the AVI header avoids storing follow-up master
indexes within the 'movi' data later. If the option is omitted or zero
the index size is estimated from output duration and bitrate.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The current implementation creates new segments comparing
pkt->pts - first_pts > nb_segs * min_seg_duration
This works fine, but if the keyframe interval is smaller than "min_seg_duration"
segments shorter than the minimum segment duration are created.
Example: keyint=50, min_seg_duration=3000000
segment 1 contains keyframe 1 (duration=2s < total_duration=3s)
and keyframe 2 (duration=4s >= total_duration=3s)
segment 2 contains keyframe 3 (duration=6s >= total_duration=6s)
segment 3 contains keyframe 4 (duration=8s < total_duration=9s)
and keyframe 5 (duration=10s >= total_duration=9s)
...
Segment 2 is only 2s long, shorter than min_seg_duration = 3s.
To fix this, new segments are created based on the actual written duration.
Otherwise the option name "min_seg_duration" is misleading.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, adds a UTCTiming tag in the manifest.
This is part of the recommendations listed in the "Guidelines for
Implementations: DASH-IF Interoperability Points" [1][2]
Section 4.7 describes means for the Availability Time Synchronization.
A usable default is "https://time.akamai.com/?iso"
[1] http://dashif.org/guidelines/
[2] http://dashif.org/wp-content/uploads/2016/12/DASH-IF-IOP-v4.0-clean.pdf
(current version as of writing)
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Codec 4 (frame size 98) uses joint stereo per spec and examples.
Also removed an incorrect "align" var which wasn't used anyway (it was overwrittern).
Probably all/only .AT3 of frame size 98 are JS, too.
Signed-off-by: bnnm <bananaman255@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Servers seem to be happy to receive the wrapped-around value as long
as they receive a report, otherwise they timeout.
Initially reported and analyzed by Thomas Bernhard.
When detecting a swapped AC3 marker the data of the frame is swapped. However, in subsequent frames the data swapped is taken from the first frame rather than the current frame.
Signed-off-by: Marijn Meijles <marijn@bitpit.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
to avoid rebuffering on the clientside for difficult network conditions.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Appends Z to timestamp to force ISO8601 datetime parsing as UTC.
Without Z, some browsers (Chrome) interpret the timestamp as
localtime and others (Firefox) interpret it as UTC.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
From e24d95c0e06a878d401ee34fd6742fcaddeeb95f Mon Sep 17 00:00:00 2001
From: Joel Cunningham <joel.cunningham@me.com>
Date: Mon, 9 Jan 2017 13:37:51 -0600
Subject: [PATCH] tcp: set socket buffer sizes before listen/connect/accept
Attempting to set SO_RCVBUF and SO_SNDBUF on TCP sockets after connection
establishment is incorrect and some stacks ignore the set call on the socket at
this point. This has been observed on MacOS/iOS. Windows 7 has some peculiar
behavior where setting SO_RCVBUF after applies only if the buffer is increasing
from the default while decreases are ignored. This is possibly how the incorrect
usage has gone unnoticed
Unix Network Programming Vol. 1: The Sockets Networking API (3rd edition, seciton 7.5):
"When setting the size of the TCP socket receive buffer, the ordering of the
function calls is important. This is because of TCP's window scale option,
which is exchanged with the peer on SYN segments when the connection is
established. For a client, this means the SO_RCVBUF socket option must be
set before calling connect. For a server, this means the socket option must
be set for the listening socket before calling listen. Setting this option
for the connected socket will have no effect whatsoever on the possible window
scale option because accept does not return with the connected socket until
TCP's three-way handshake is complete. This is why the option must be set on
the listening socket. (The sizes of the socket buffers are always inherited from
the listening socket by the newly created connected socket)"
Signed-off-by: Joel Cunningham <joel.cunningham@me.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When bytes_read overflowed, last_bytes_read did not yet overflow
and no bytes-read report was created leading to a timeout.
Analyzed-by: Thomas Bernhard
Fixes ticket #5836.
If fifo is enabled on tee muxer, ffmpeg exits because of an unknown option passed to fifo muxer.
Option name "format_options" was replaced by "format_opts" on tee muxer.
Signed-off-by: Felipe Astroza <felipe@astroza.cl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This happens because segment_end() returns an error, so seg_write_packet
never proceeds to segment_start(), and seg->avf->pb is never re-set,
so we crash with a null pb when av_write_trailer flushes the packet
queue.
This doesn't seem to be clearly recoverable, so I'm just failing more
gracefully.
Repro:
ffmpeg -i input.ts -f segment -c copy -segment_list /noaxx.m3u8 test-%05d.ts
(assuming you don't have write access to /)
Marton Balint
Carl Eugen Hoyos
Paul B Mahol
erankor
Andreas Cadhalpun
Moritz Barsnick
Tobias Rapp
Michael Niedermayer
Peter Große
bnnm
Luca Barbato
Marijn Meijles
Paul Arzelier
James Almer
Chris Moeller
Aaron Colwell
Sasi Inguva
Anton Schubert
Peter Große
Joel Cunningham
Frank Liberato
Alexandra Hájková
compn
Steven Liu
Felipe Astroza
Rodger Combs