It was merged with the iff_ilbm decoder in commit
929a24efff.
Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This finalizes merging of the work in the patches in ticket #2686.
Improvements to twoloop and RC logic are extensive.
The non-exhaustive list of twoloop improvments includes:
- Tweaks to distortion limits on the RD optimization phase of twoloop
- Deeper search in twoloop
- PNS information marking to let twoloop decide when to use it
(turned out having the decision made separately wasn't working)
- Tonal band detection and priorization
- Better band energy conservation rules
- Strict hole avoidance
For rate control:
- Use psymodel's bit allocation to allow proper use of the bit
reservoir. Don't work against the bit reservoir by moving lambda
in the opposite direction when psymodel decides to allocate more/less
bits to a frame.
- Retry the encode if the effective rate lies outside a reasonable
margin of psymodel's allocation or the selected ABR.
- Log average lambda at the end. Useful info for everyone, but especially
for tuning of the various encoder constants that relate to lambda
feedback.
Psy:
- Do not apply lowpass with a FIR filter, instead just let the coder
zero bands above the cutoff. The FIR filter induces group delay,
and while zeroing bands causes ripple, it's lost in the quantization
noise.
- Experimental VBR bit allocation code
- Tweak automatic lowpass filter threshold to maximize audio bandwidth
at all bitrates while still providing acceptable, stable quality.
I/S:
- Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
when the merge was finalized. Measure I/S band energy accounting for
phase, and prevent I/S and M/S from being applied both.
PNS:
- Avoid marking short bands with PNS when they're part of a window
group in which there's a large variation of energy from one window
to the next. PNS can't preserve those and the effect is extremely
noticeable.
M/S:
- Implement BMLD protection similar to the specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
doesn't conform to section 6.1, a different method had to be
implemented, but should provide equivalent protection.
- Move the decision logic closer to the method specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
make sure M/S needs less bits than dual stereo.
- Don't apply M/S in bands that are using I/S
Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.
The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.
A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.
This adds av_warn_unused_result whenever it is relevant.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes Ticket4922.
Commit 060102389e broke configure, since
the inversion ! was missed while converting the grep to a case
statement.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
FFmpeg already tests for this case in configure_output_filter() and printed a
clearer error message
example:
./ffmpeg -f lavfi -i color -f lavfi -i color -filter_complex "[1]null[x],[0][1]overlay" -f null -
before the merge / after the revert:
Filter null has a unconnected output
after the merge / before the revert:
Output pad "default" with type video of the filter instance "Parsed_null_0" of null not connected to any destination
Error configuring complex filters.
Invalid argument
This reverts commit 3e3779cd51, reversing
changes made to 0b28039a44.
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
This reduces the memory & cache need from 256 to 64 bytes
the code also seems faster with this change
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses Stein's binary GCD algorithm:
https://en.wikipedia.org/wiki/Binary_GCD_algorithm
to get a roughly 4x speedup over Euclidean GCD on standard architectures
with a compiler intrinsic for ctzll, and a roughly 2x speedup otherwise.
At the moment, the compiler intrinsic is used on GCC and Clang due to
its easy availability.
Quick note regarding overflow: yes, subtractions on int64_t can, but the
llabs takes care of that. The llabs is also guaranteed to be safe, with
no annoying INT64_MIN business since INT64_MIN being a power of 2, is
shifted down before being sent to llabs.
The binary GCD needs ff_ctzll, an extension of ff_ctz for long long (int64_t). On
GCC, this is provided by a built-in. On Microsoft, there is a
BitScanForward64 analog of BitScanForward that should work; but I can't confirm.
Apparently it is not available on 32 bit builds; so this may or may not
work correctly. On Intel, per the documentation there is only an
intrinsic for _bit_scan_forward and people have posted on forums
regarding _bit_scan_forward64, but often their documentation is
woeful. Again, I don't have it, so I can't test.
As such, to be safe, for now only the GCC/Clang intrinsic is added, the rest
use a compiled version based on the De-Bruijn method of Leiserson et al:
http://supertech.csail.mit.edu/papers/debruijn.pdf.
Tested with FATE, sample benchmark (x86-64, GCC 5.2.0, Haswell)
with a START_TIMER and STOP_TIMER in libavutil/rationsl.c, followed by a
make fate.
aac-am00_88.err:
builtin:
714 decicycles in av_gcd, 4095 runs, 1 skips
de-bruijn:
1440 decicycles in av_gcd, 4096 runs, 0 skips
previous:
2889 decicycles in av_gcd, 4096 runs, 0 skips
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Proper names should be capitalized in all user facing API as far as
possible. The option names themselves have not been changed since:
1. We consistently keep option names in lower case.
2. Changing them would break existing scripts.
3. I suspect that we want to be similar to Sox and its relevant options.
The converse is also true: improper names should not be capitalized
generally.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
During a build, a lot of *.o.-hash files are created - had not noticed
this as they are usually dumped in tmpfs on Linux. However, they
sometimes are present during a long build in the project directory, making it
annoying to commit while the project is being built.
These have been observed with Clang, -fsanitize-undefined on Arch Linux,
though other configurations may also generate such temporaries.
The solution here is on lines with the Linux kernel's .gitignore:
https://github.com/torvalds/linux/blob/master/.gitignore.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Proper names should be capitalized in all user facing API as far as
possible. The option names themselves have not been changed since:
1. We consistently keep option names in lower case.
2. Changing them would break existing scripts.
The converse is also true: improper names should not be capitalized
generally.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should fix the undefined behavior reported in:
https://trac.ffmpeg.org/ticket/4727.
I can reproduce this at runtime: simply stick in an abort call in
asym_quant to check if c < 0 and run FATE. I don't know ac3 so I can't
confirm if negative coefficients are intentional, but at the moment they
clearly are according to FATE.
This resolves the undefined behavior. Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '00cc10aee380f882507bac994ac469d8358d12e8':
asfdec: do not skip padding if offset is above packet size - padding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8b830ee9a26d47b138f12a82085cdb372f407f1e':
avconv: Do not try to configure filter outputs without streams
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd7a5a178c252b625537adc046392624ad543dea7':
configure: When disabling a library disable all the related components
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
the pps offset is used to locate pps in the spspps_buf; however, the
current calc method is wrong because it is the offset of the original
avctx->extradata;
when there is only one sps in the avcc; the value is correct by
coincidence, however, it will fail in avcc with multi sps
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Rostislav Pehlivanov
James Almer
Andreas Cadhalpun
Marton Balint
Ronald S. Bultje
Claudio Freire
Ganesh Ajjanagadde
Jean-Yves Avenard
Paul B Mahol
Michael Niedermayer
Clément Bœsch
Zhang Rui
Rodger Combs
Hendrik Leppkes
Anton Khirnov
Derek Buitenhuis
赵宇龙