The old layout happened to be a native layout and therefore missed some
recently fixed layout parsing bugs.
Signed-off-by: Marton Balint <cus@passwd.hu>
If a custom layout is equivalent to a native one, check if it matches one of the
known layout names and print that instead.
Signed-off-by: James Almer <jamrial@gmail.com>
This together with adjusting the inclusion define allows for the
build to not fail with latest Vulkan-Headers that contain the
stabilized Vulkan AV1 decoding definitions.
Compilation fails currently as the AV1 header is getting included
via hwcontext_vulkan.h -> <vulkan/vulkan.h> -> vulkan_core.h, which
finally includes vk_video/vulkan_video_codec_av1std.h and the decode
header, leading to the bundled header to never defining anything
due to the inclusion define being the same.
This fix is imperfect, as it leads to additional re-definition
warnings for things such as
VK_STD_VULKAN_VIDEO_CODEC_AV1_DECODE_SPEC_VERSION. , but it is
not clear how to otherwise have the bundled version trump the
actually standardized one for a short-term compilation fix.
Currently, this only affects untagged RGB/XYZ/Gray, which get forced to
their corresponding metadata before entering the filter graph. The main
justification for this change, however, is the planned ability to add
automatic promotion of unspecified yuv to mpeg range yuv.
Notably, this change will never allow accidentally cross-promoting
unspecified to jpeg or to a specific YUV matrix, since that is still
bound by the constraints of YUV range negotiation as set up by
query_formats.
Since 7bf1b9b357,
the test produces ordinary \n, yet this is not what the reference
file used for the most time, leading to test failures.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Previously, we produced output with either \r\n or mixed line endings.
This was undesirable unto itself, but also made working with patches affecting
FATE output particularly challenging, especially via the mailing list.
Everything that consumes the SSA/ASS format is line-ending-agnostic,
so \n is selected to simplify git/ML usage in FATE.
Extra \r characters at the end of a packet are dropped. These are always
ignored by the renderer anyway.
The previous assumption that DXV needs to be aligned to 16x16 was
erroneous. 4x4 works just as well, and FATE decoder tests pass for all
texture formats.
On the encoder side, we should reject input that isn't 4x4 aligned,
like the HAP encoder does, and stop aligning to 16x16. This both solves
the uninitialized reads causing current FATE tests to fail and produces
smaller encoded outputs.
With regard to correctness, I've checked the decoding path by encoding a
real-world sample with git master, and decoding it with
ffmpeg -i dxt1-master.mov -c:v rawvideo -f framecrc -
The results are exactly the same between master and this patch.
On the encoding side, I've encoded a real-world sample with both master
and this patch, and decoded both versions with
ffmpeg -i dxt1-{master,patch}.mov -c:v rawvideo -f framecrc -
Under this patch, results for both inputs are exactly the same.
In other words, the extra padding gained by 16x16 alignment over 4x4
alignment has no impact on decoded video.
Signed-off-by: Connor Worley <connorbworley@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes all ff_draw_* based filters aware of YUV colorspaces and
ranges. Needed for YUVJ removal. Also fixes a bug where e.g. vf_pad
would generate a limited range background even after conversion to
full-scale grayscale.
The FATE changes were a consequence of the aforementioned bugfix - the
gray scale files are output as full range (due to conversion by
libswscale, which hard-codes gray = full), and appropriately tagged as
such, but before this change the padded version incorrectly used
a limited range (16) black background for these formats.
Use 8 packets/frames by default rather than 1, which seems to provide
better throughput.
Allow -thread_queue_size to set the muxer queue size manually again.
Finishes fixing vp5/potter512-400-partial.avi
The fate-matroska-ms-mode test ref is updated to reflect that the Speex decoder
can now read the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Covers muxing from raw pcm audio input into FLAC, using several scalable layouts,
and demuxing the result.
Signed-off-by: James Almer <jamrial@gmail.com>
This is the 64bit version of Chris Doty-Humphreys SFC64
Compared to the LCGs these produce much better quality numbers.
Compared to LFGs this needs less state. (our LFG has 224 byte
state for its 32bit version) this has 32byte state
Also the initialization for our LFG is slower.
This is also much faster than KISS or PCG.
This commit replaces the broken LCG used before.
(broken as it had only a period ~200M due to being put in a double)
This changes the output from random() which is why libswresample.mak
is updated, update was done using the command in libswresample.mak
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On some platforms (in particular, ARM/AArch64), the implementation
of AV_READ_TIME() may use a privileged instruction - in such
cases, benchmarking just fails with a SIGILL.
Instead of crashing, try executing AV_READ_TIME() once within
a region with the signal handler active, to allow gracefully
informing the user about the issue.
This matches the dav1d checkasm commit
95a192549a448b70d9542e840c4e34b60d09b093.
Signed-off-by: Martin Storsjö <martin@martin.st>
Parse iprp and iinf boxes and its child boxes to get the actual codec used
(AV1 for avif, HEVC for heic), and properly export extradata and other
properties in a generic way.
The avif tests reference files are updated as the extradata is now exported.
Based on a patch by Swaraj Hota
Co-authored-by: Swaraj Hota <swarajhota353@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Marth64 <marth64@proxyid.net>
Raw Captions With Time (RCWT) is a format native to ccextractor, a commonly
used open source tool for processing 608/708 closed caption (CC) sources.
It can be used to archive the original, raw CC bitstream and to produce
a source file file for later CC processing or conversion. As a result,
it also allows for interopability with ccextractor for processing CC data
extracted via ffmpeg. The format is simple to parse and can be used
to retain all lines and variants of CC.
A free specification of RCWT can be found here:
https://github.com/CCExtractor/ccextractor/blob/master/docs/BINARY_FILE_FORMAT.TXT
This muxer implements the specification as of 01/05/2024, which has
been stable and unchanged for 10 years as of this writing.
This muxer will have some nuances from the way that ccextractor muxes RCWT.
No compatibility issues when processing the output with ccextractor
have been observed as a result of this so far, but mileage may vary
and outputs will not be a bit-exact match.
Specifically, the differences are:
(1) This muxer will identify as "FF" as the writing program identifier, so
as to be honest about the output's origin.
(2) ffmpeg's MPEG-1/2, H264, HEVC, etc. decoders extract closed captioning
data differently than ccextractor from embedded SEI/user data.
For example, DVD captioning bytes will be translated to ATSC A53 format.
This allows ffmpeg to handle 608/708 in a consistant way downstream.
This is a lossless conversion and the meaningful data is retained.
(3) This muxer will not alter the extracted data except to remove invalid
packets in between valid CC blocks. On the other hand, ccextractor
will by default remove mid-stream padding, and add padding at the end
of the stream (in order to convey the end time of the source video).
This replaces the riscv specific handling from
7212466e73 (which essentially is
reverted), with a different implementation of the same (plus a bit
more), based on the corresponding feature in dav1d's checkasm,
supporting both Unix and Windows.
See in particular the dav1d commits
0b6ee30eab2400e4f85b735ad29a68a842c34e21,
0421f787ea592fd2cc74c887f20b8dc31393788b,
8501a4b20135f93a4c3b426468e2240e872949c5 and
d23e87f7aee26ddcf5f7a2e185112031477599a7, authored by Henrik Gramner.
The overall approach compared to the existing implementation for
riscv is the same; set up a signal handler, store the state with
sigsetjmp, jump out of the crashing function with siglongjmp.
The main difference is in what happens when the signal handler
is invoked. In the previous implementation, it would resume from
right before calling the crashing function, and then skip that call
based on the setjmp return value.
In the imported implementation from dav1d, we return to right before
the check_func() call, which will skip testing the current function
(as the pointer is the same as it was before).
Other differences are:
- Support for other signal handling mechanisms (Windows
AddVectoredExceptionHandler)
- Using RtlCaptureContext/RtlRestoreContext instead of setjmp/longjmp
on Windows with SEH
- Only catching signals once per function - if more than one
signal is delivered before signal handling is reenabled, any
signal is handled as it would without our handler
- Not using an arch specific signal handler written in assembly
Signed-off-by: Martin Storsjö <martin@martin.st>
The layout for the frame flags is as follow:
chroma_format u(2)
reserved u(2)
interlace_mode u(2)
reserved u(2)
chroma_format has 2 allowed values:
0: reserved
1: reserved
2: 4:2:2
3: 4:4:4
interlace_mode has 3 allowed values:
0: progressive
1: tff
2: bff
3: reserved
0x80 is what we expect for "422 not interlaced", and the extra 0x2 from
0x82 is actually writing into the reserved bits.
This byte represents 4 reserved bits followed by 4 alpha_channel_type bits.
alpha_channel_type currently has 3 differents defined values: 0 (no
alpha), 1 (8b alpha), and 2 (16b alpha), all the other values are
reserved. The 4 initial reserved bits are expected to be 0.
This byte represents 4 reserved bits followed by 4 alpha_channel_type bits.
alpha_channel_type currently has 3 differents defined values: 0 (no
alpha), 1 (8b alpha), and 2 (16b alpha), all the other values are
reserved. This part is correctly written (alpha_bits>>3 does the correct
thing), but the 4 initial bits are reserved.
Quoting SMPTE RDD 36:2015:
A decoder shall abort if it encounters a bitstream with an unsupported
bitstream_version value. If 0, the value of the chroma_format syntax
element shall be 2 (4:2:2 sampling) and the value of the
alpha_channel_type element shall be 0 (no encoded alpha); if 1, any
permissible value may be used for those syntax elements.
So if we're not in 4:2:2 or if there is alpha, we are not allowed to use
version 0.
They are similar to AVIF images (both use the HEIF container).
The only additional work needed is to parse the hvcC box and put
it in the extradata.
With this patch applied, ffmpeg (when built with an HEVC decoder)
is able to decode the files in
https://github.com/nokiatech/heif/tree/gh-pages/content/images
Also add a couple of fate tests with samples from
https://github.com/nokiatech/heif_conformance/tree/master/conformance_files
Partially fixes trac ticket #6521.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
James Almer
Marton Balint
Andreas Rheinhardt
Jan Ekström
sunyuechi
Niklas Haas
rcombs
Connor Worley
Anton Khirnov
Cosmin Stejerean
Wu Jianhua
Michael Niedermayer
Martin Storsjö
Marth64
Clément Bœsch
Vignesh Venkatasubramanian via ffmpeg-devel