This has happened when writing chapters: Both editions as well as
chapters are by default not hidden and given that we don't support
writing hidden chapters at all, we don't need to write said elements at
all. The same goes for ChapterFlagEnabled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The mdcv atom isn't in ISO/IEC 14496-12:2015 but it is expected to be
added soon. See:
http://ffmpeg.org/pipermail/ffmpeg-devel/2020-April/259529.html
The mdcv atom is already parsed in FFmpeg in mov.c.
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
The switch cases were missing:
- Primaries: bt470m, film, smpte428, and ebu3213.
- TRCs: gamma22, gamma28, linear, log, log_sqrt, iec61966_2_4, bt1361,
iec61966_2_1, bt2020_10bit, and bt2020_12bit.
- Space: rgb, fcc, ycgco, bt2020_cl, smpte2085, chroma-derived-nc,
chroma-derived-c, and ictcp.
They also annoyingly remapped the following (which are functionally
equivalent but can be treated differently by clients):
- smpte240m primaries to smpte170m.
- smpte170m TRC to bt709.
- bt470bg color space to smpte170m.
The enum values in FFmpeg are the same values as ITU-T H.273 and
ISO/IEC 23001-8 so we can just use them directly, which is both simpler
and preserves the user intent.
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
Up until now, mkv_write_track() received the index of the stream whose
header data it is about to write as parameter; this index has until
recently been explicitly used to generate both TrackNumber and TrackUID.
But this is no longer so and as there is no reason why the function
for writing a single TrackEntry should even know the index of the
TrackEntry it is about to write, said index is replaced in the list of
function parameters by the corresponding AVStream and mkv_track.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkv_cuepoint (the structure used to store the index entries in the
Matroska muxer) currently contains fields for both the index of the
packet's stream in the AVFormatContext.streams array and for the
Matroska TrackNumber; correspondingly, mkv_add_cuepoint() has parameters
for both. But these two numbers can't be chosen independently, so get
rid of the TrackNumber.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Attachments are streams in FFmpeg, but they are not tracks in Matroska.
Yet they were counted when checking a limit for the number of tracks that
the Matroska muxer imposes. This is unnecessary and has been changed.
Also use unsigned variables for the variables denoting TrackNumbers as
negative TrackNumbers are impossible.
(The Matroska file format actually has practically no limit on the
number of tracks and this is purely what our muxer supports. But even if
this limit were removed/relaxed in the future, it still makes sense to
use small TrackNumbers as this patch does, because greater numbers need
more bytes to encode.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using random values for TrackUID and FileUID (as happens when the
AVFMT_FLAG_BITEXACT flag is not set) has the obvious downside of making
the output indeterministic. This commit mitigates this by writing the
potentially random values with a fixed size of eight byte, even if their
actual values would fit into less than eight bytes. This ensures that
even in non-bitexact mode, the differences between two files generated
with the same settings are restricted to a few bytes in the header.
(Namely the SegmentUID, the TrackUIDs (in Tracks as well as when
referencing them via TagTrackUID), the FileUIDs (in Attachments as
well as in TagAttachmentUID) as well as the CRC-32 checksums of the
Info, Tracks, Attachments and Tags level-1-elements.) Without this
patch, there might be an offset/a size difference between two such
files.
The FATE-tests had to be updated because the fixed-sized UIDs are also
used in bitexact mode.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If there are Attachments to write, the Matroska muxer currently
allocates two objects: An array that contains an entry for each
AttachedFile containing just the stream index of the corresponding
stream and the FileUID used for this AttachedFile; and a structure with
a pointer to said array and a counter for said array. These uids are
generated via code special to Attachments: It uses an AVLFG in the
normal and a sha of the attachment data in the bitexact case. (Said sha
requires an allocation, too.)
But now that an uid is generated for each stream in mkv_init(), there is
no need any more to use special code for generating the FileUIDs of
AttachedFiles: One can simply use the uid already generated for the
corresponding stream. And this makes the whole allocations of the
structures for AttachedFiles as well as the structures itself superfluous.
They have been removed.
In case AVFMT_FLAG_BITEXACT is set, the uids will be different from the
old ones which is the reason why the FATE-test lavf-mkv_attachment
needed to be updated. The old method had the drawback that two
AttachedFiles with the same data would have the same FileUID.
The new one doesn't.
Also notice that the dynamic buffer used to write the Attachments leaks
if an error happens when writing the buffer. By removing the
allocations potential sources of errors have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit reuses the random seed generated in mkv_init() (to determine
the TrackUIDs) for the SegmentUID in order to avoid a potentially
expensive call to av_get_random_seed().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the TrackUID of a Matroska track which is supposed to be
random was not random at all: It always coincided with the TrackNumber
which is usually the 1-based index of the corresponding stream in the
array of AVStreams. This has been changed: It is now set via an AVLFG
if AVFMT_FLAG_BITEXACT is not set. Otherwise it is set like it is set
now (the only change happens if an explicit track number has been
chosen via dash_track_number, because the system used in the normal
situation is now used, too). In particular, no FATE tests need to be
updated.
This also fixes a bug in case the dash_track_number option was used:
In this case the TrackUID was set to the provided number, but the tags
were written with a TagTrackUID simply based upon the index, so that
the tags didn't apply to the track they ought to apply to.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Tags in the Matroska file format can be summarized as follows: There is
a level 1-element called Tags containing one or many Tag elements each
of which in turn contain a Targets element and one or many SimpleTags.
Each SimpleTag roughly corresponds to a single key-value pair similar to
an AVDictionaryEntry. The Targets meanwhile contains information to what
the metadata contained in the SimpleTags contained in the containing Tag
applies (i.e. to the file as a whole or to an individual track).
The Matroska muxer writes such metadata. It puts the metadata of every
stream into a Tag whose Targets makes it point to the corresponding
track. And if the output is seekable, then it also adds another Tag for
each track whose Targets corresponds to the track and where it reserves
space in a SimpleTag to write the duration at the end of the muxing
process into.
Yet there is no reason to write two Tag elements for a track and a few
bytes (typically 24 bytes per track) can be saved by adding the duration
SimpleTag to the other Tag of the same track (if it exists).
FATE has been updated because the output files changed. (Tests that
write to unseekable output (pipes) needn't be updated (no duration tag
has ever been written for them) and the same applies to tests without
further metadata.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AVChapters have an int as id field and therefore this value can appear
<= 0. When remuxing from Matroska, this value actually contains
the lower 32 bits of the original ChapterUID (which can be 64 bits).
In order to ensure that the ChapterUID is always > 0, they were offset
as follows (since 07704c61): First max(0, 1LL - chapter[i].id) was computed
and stored in an uint32_t. And then the IDs were offset using this value.
This has two downsides:
1. It does not ensure that the UID is actually != 0: Namely if there is
a chapter with id == INT_MIN, then the offset will be 2^31 + 1 and a
chapter with id == INT_MAX will become 2^31 - 1 + 2^31 + 1 = 2^32 = 0,
because the actual calculation was performed in 32 bits.
2. As soon as a chapter id appears to be negative, a nontrivial offset
is used, so that not even a ChapterUID that only uses 32 bits is
preserved.
So change this by treating the id as an unsigned value internally and
only offset (by 1) if an id vanishes. The actual offsetting then has to
be performed in 64 bits in order to make sure that no UINT32_MAX wraps
around.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
dts would start over at the beginning of each trun when they should be
computed contiguously for each trun in a traf
Fixes ticket 8070
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If some but not all moof's are referenced in an sidx, whole fragments
were being skipped.
Fixes tickets 7377, 7389, and 8502
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Regression since 8d3630c540 where keys were changed
to not be touppered but the picture block strcmp was not changed to be case-insensitive.
Fixes ticket #8608.
subtitles.h has been included in order to use ff_subtitles_next_line()
to help parsing srt subtitles which at that time had their timing as
part of the payload and not as part of the AVPacket fields. When this
changed (in 55180b32) it has been forgotten to remove this header.
libavcodec/internal.h meanwhile has been added in bb47aa5850 and has
never been used at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
vobsub_read_packet() didn't check whether an array of AVPackets was
valid and therefore used uninitialized values.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
if the directory name of the segments contains "%v".
This memleak is caused by masking the pointer that will eventually
be freed by a variable of the same name in a smaller scope.
Therefore the pointer that gets freed is always NULL when it is
freed and the allocated data leaks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is mainly about improving legibility of the code and getting rid of
overlong lines by using variables for st->codecpar instead of accessing
the codecparameters via st->codecpar->.
Also, some code has been moved to better fitting places.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit removes data that is only used during smacker_read_header()
from the demuxer's context and replaces the data that is used by local
variables. The other data is completely dropped.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Smacker demuxer currently parses several fields that indicate
how many audio streams a file contains. This data is parsed and stored
into arrays in the demuxer's context and although the data is used only
to initialize the audio streams, it is kept for the whole lifetime of
the demuxer.
This has been changed: The data is used directly to create
the audio streams and no longer kept at all.
This also simplifies error handling in case adding a new stream fails:
Several arrays which until now have been allocated between parsing the
data determining how many audio streams to create and actually creating
them would need to be freed in this case. Now the streams are created
first, so freeing is no longer an issue.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Smacker demuxer reads four consecutive 32bit values from the file
header into its demux context (as four uint32_t), converting it to
native endianness in the process and then writing these four values
later (after extradata has been allocated) to extradata as four 32bit
values (converting to little endian in the process).
This commit changes this: The stream and the extradata are allocated
earlier, so that the data destined for extradata can be read directly
into extradata.
Furthermore, given that these values are not needed for demuxing itself
they are now no longer kept as part of the demuxing context.
Finally, a check regarding the number of frames has been moved up,
too, in order to exit early before unnecessarily allocating the
stream and the extradata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The WebM DASH Manifest muxer only supports VP8, VP9, Vorbis and Opus,
but there was no check for this. The codec type is used to get a pointer
to a string containing the codec name or NULL if it is not one of those
four codecs. Said pointer has then been used without further checks as
string for the %s conversion specifier in an avio_printf()) call which
is undefined behaviour.
This commit adds a check for the supported codec types.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Some broken apps generate files that have a fake box named 'hoov'
instead of a proper 'moov' one. This is speculation but it seems like
this box contains data to be modified later (eg as file grows in size,
data gets re-written) and its name is supposed to be changed to 'moov'
once it can be used as a 'moov', but for some reason this step is skipped.
Since this is not the first time this happens ('moov' boxes can be found
in 'free' ones) extend the existing hacks to search for the moov in such
boxes and skip the moov_retry since it needs to be found right away.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Fixes the following warnings:
libavformat/chromaprint.c:117:42: warning: passing argument 2 of ‘chromaprint_feed’ from incompatible pointer type
libavformat/chromaprint.c:132:52: warning: passing argument 2 of ‘chromaprint_get_raw_fingerprint’ from incompatible pointer type
libavformat/chromaprint.c:143:71: warning: passing argument 4 of ‘chromaprint_encode_fingerprint’ from incompatible pointer type
The code for GAB2 subtitles predates refcounting AVPackets. So in order
to transfer the ownership of a packet's data pkt->data was simply stored
and the packet zeroed; in the end (i.e. in the read_close-function) this
data was then simply freed with av_freep(). This of course leads to a leak
of an AVBufferRef and an AVBuffer. It has been fixed by keeping and
eventually unreferencing the packet's buf instead.
Additionally, the packet is now reset via av_packet_unref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
An AVIStream (intended to be used as private data for an AVStream) would
leak in this scenario.
Also return a more fitting error code instead of AVERROR_INVALIDDATA.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one uses a build without dv demuxer, an AVIStream struct that is
destined to be used as private data for an AVStream by the avi demuxer
would leak, because it has been moved from the AVStream (that is going
to be freed) and only stored in a local variable (in order to be used
for another AVStream), but if the dv demuxer is disabled, the earlier
code returned immediately instead.
Also return a better error code in this scenario (instead of
AVERROR_INVALIDDATA).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using ff_free_stream() makes the code more readable, more future-proof
(the old code freed AVCodecContexts and AVCodecParameters and its
substructures manually, so that there is a chance that there would be a
memleak for some time if new substructures were added) and reduces
code size.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AviSynth+ now supports non-Windows OSes, making AvxSynth
obsolete. Since we no longer support AviSynth 2.5 (which is
essentially what AvxSynth is), remove AvxSynth support and
replace it with AviSynth+.
As a result, the USING_AVISYNTH defines can be switched back
to generic _WIN32.
Andreas Rheinhardt
Michael Bradshaw
Michael Niedermayer
John Stebbins
Mattias Wadman
Paul B Mahol
Limin Wang
Marton Balint
Vittorio Giovara
Carl Eugen Hoyos
Stephen Hutchinson