Since there is no information about the source format, "unspecified"
is the correct value to write here.
All tests using the MPEG-2 encoder are updated, as this changes the
header on all outputs.
This reverts commit 04aa09c4bc
and reintroduces 0ff5567a30 that
was temporarily reverted due to minor regressions.
It also reverts e5bce8b4ce that fixed FATE refs.
The fate-ffm change is caused by field_order now being set
on the output format because the first frame arrives earlier.
The fate-mxf change is assumed to be the same.
<@jamrial> durandal_1707: 04aa09c4bc broke fate-lavf-ffm and fate-lavf-mxf
<@durandal_1707> how so?
<@jamrial> one byte changes
<@durandal_1707> jamrial: just update checksums
<@jamrial> durandal_1707: but why did they change at all? the commit you reverted didn't affect them
<@jamrial> why does reverting it affect these tests?
<@jamrial> i don't think updating the checksum without knowing what changed is a good idea
<@durandal_1707> jamrial: the lavfi core is in weird state after removal of recursive code
<@durandal_1707> jamrial: the change is that older ones would get progressive flag set and new one doesnt
<@jamrial> alright
As it gives excellent encoding gains at an insignificant speed increase
and passes fate without problems, it should now be safe to enable by
default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.
This merges Libav commit a3a0230. It was previously skipped.
The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.
The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.
The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.
The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This would be simpler if codecpar supported AVOptions
modern ffserver should be unaffected by this, older ffserver which required the
muxer to directly access the encoder could have issues with this, but this
direct access is just wrong and unsafe
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This accesses the private encoder context, it should not be used by
the current ffserver it may affect old ffserver versions but i believe
there is consens that accessing the private encoder context from the muxer
is completely wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit e0c6b32046.
Said commit changed the behavior of the demuxer and decoder in a non
backwards compatible way.
Demuxers should make extradata available at init if possible, and send
new extradata as side data within a packet if needed.
A better fix for the remuxing crash will follow.
Signed-off-by: James Almer <jamrial@gmail.com>
Also test the fallback to png creation for a single frame.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a15
Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>
We don't currently support values 1 (centimeters), 2 (inches) or 3 (DAR),
only the default value 0 (pixels) which doesn't need to be written.
The fate refs are updated as unknown SAR is now signaled in the output
files with the addition of the new element.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Attachment tags were being written targeting non-existent streams in the
output file.
Also filter filename and mimetype entries, as they are standard elements
in the Attachment master.
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.
There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters
The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).
Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The bits_per_raw_sample represents the number of bits of precision per sample.
The field is added at the logical place, not at the end as the code was just
recently added
This fixes the regression about losing the audio sample precision information
The change in the fate test checksum un-does the change from the merge
Previous version reviewed by: wm4 <nfxjfg@googlemail.com>
Previous version reviewed by: Dominik 'Rathann' Mierzejewski <dominik@greysector.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
This reverts commit 8ed82d8174.
SMPTE S377-1-2009c defines in F.4.1 that the Video Line Map should
always be an array with two 32 bit integers as elements. This is
repeated in G.2.12 with actual examples for progressive content,
where the second value would always be 0.
Additionally, the IRT MXF analyser also lists this as the only
error in the MXF output from ffmpeg: https://mxf-analyser-cloud.irt.de
Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since timecode_frame)start is a private option now, it stays at the default,
and is no longer written to the file.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The CMP variable seems to have been inherited from fate-api-seek which set it to null
the mxf reference needed a change due to c7e14a279f
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
Previous version Reviewed-by: tim nicholson <nichot20@yahoo.com>
Previous version Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Mark Thompson
Michael Niedermayer
Nicolas George
James Almer
Rostislav Pehlivanov
Muhammad Faiz
Anton Khirnov
John Stebbins
Andreas Cadhalpun
Clément Bœsch
Thomas Bernard
Martin Storsjö
Luca Barbato
Marton Balint
Sebastian Dröge
Derek Buitenhuis
Vittorio Giovara
Sasi Inguva
Juanjo
Michael Niedermayer
Mark Reid