It should be available in all relevant modern compilers and will allow
us to use features like anonymous unions.
Note that stdatomic.h is still emulated on MSVC, as current versions
require the /experimental:c11atomics, and do not support
ATOMIC_VAR_INIT() anyway.
Signed-off-by: Marth64 <marth64@proxyid.net>
Raw Captions With Time (RCWT) is a format native to ccextractor, a commonly
used open source tool for processing 608/708 closed caption (CC) sources.
It can be used to archive the original, raw CC bitstream and to produce
a source file file for later CC processing or conversion. As a result,
it also allows for interopability with ccextractor for processing CC data
extracted via ffmpeg. The format is simple to parse and can be used
to retain all lines and variants of CC.
A free specification of RCWT can be found here:
https://github.com/CCExtractor/ccextractor/blob/master/docs/BINARY_FILE_FORMAT.TXT
This muxer implements the specification as of 01/05/2024, which has
been stable and unchanged for 10 years as of this writing.
This muxer will have some nuances from the way that ccextractor muxes RCWT.
No compatibility issues when processing the output with ccextractor
have been observed as a result of this so far, but mileage may vary
and outputs will not be a bit-exact match.
Specifically, the differences are:
(1) This muxer will identify as "FF" as the writing program identifier, so
as to be honest about the output's origin.
(2) ffmpeg's MPEG-1/2, H264, HEVC, etc. decoders extract closed captioning
data differently than ccextractor from embedded SEI/user data.
For example, DVD captioning bytes will be translated to ATSC A53 format.
This allows ffmpeg to handle 608/708 in a consistant way downstream.
This is a lossless conversion and the meaningful data is retained.
(3) This muxer will not alter the extracted data except to remove invalid
packets in between valid CC blocks. On the other hand, ccextractor
will by default remove mid-stream padding, and add padding at the end
of the stream (in order to convey the end time of the source video).
vvc decoder plug-in to avcodec.
split frames into slices/tiles and send them to vvc_thread for further decoding
reorder and wait for the frame decoding to be done and output the frame
Features:
+ Support I, P, B frames
+ Support 8/10/12 bits, chroma 400, 420, 422, and 444 and range extension
+ Support VVC new tools like MIP, CCLM, AFFINE, GPM, DMVR, PROF, BDOF, LMCS, ALF
+ 295 conformace clips passed
- Not support RPR, IBC, PALETTE, and other minor features yet
Performance:
C code FPS on an i7-12700K (x86):
BQTerrace_1920x1080_60_10_420_22_RA.vvc 93.0
Chimera_8bit_1080P_1000_frames.vvc 184.3
NovosobornayaSquare_1920x1080.bin 191.3
RitualDance_1920x1080_60_10_420_32_LD.266 150.7
RitualDance_1920x1080_60_10_420_37_RA.266 170.0
Tango2_3840x2160_60_10_420_27_LD.266 33.7
C code FPS on a M1 Mac Pro (ARM):
BQTerrace_1920x1080_60_10_420_22_RA.vvc 58.7
Chimera_8bit_1080P_1000_frames.vvc 153.3
NovosobornayaSquare_1920x1080.bin 150.3
RitualDance_1920x1080_60_10_420_32_LD.266 105.0
RitualDance_1920x1080_60_10_420_37_RA.266 133.0
Tango2_3840x2160_60_10_420_27_LD.266 21.7
Asm optimizations still working in progress. please check
https://github.com/ffvvc/FFmpeg/wiki#performance-data for the latest
Contributors (based on code merge order):
Nuo Mi <nuomi2021@gmail.com>
Xu Mu <toxumu@outlook.com>
Frank Plowman <post@frankplowman.com>
Shaun Loo <shaunloo10@gmail.com>
Wu Jianhua <toqsxw@outlook.com>
Thank you for reporting issues and providing performance reports:
Łukasz Czech <lukaszcz18@wp.pl>
Xu Fulong <839789740@qq.com>
Thank you for providing review comments:
Ronald S. Bultje <rsbultje@gmail.com>
James Almer <jamrial@gmail.com>
Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Co-authored-by: Xu Mu <toxumu@outlook.com>
Co-authored-by: Frank Plowman <post@frankplowman.com>
Co-authored-by: Shaun Loo <shaunloo10@gmail.com>
Co-authored-by: Wu Jianhua <toqsxw@outlook.com>
x11grab can capture windows by their ID, but gdigrab can only capture
windows by their names, internally calling FindWindowW to lookup its
handle.
This patch simply allows the user to specify a window handle directly.
Signed-off-by: Lena <lena@nihil.gay>
Change the main loop and every component (demuxers, decoders, filters,
encoders, muxers) to use the previously added transcode scheduler. Every
instance of every such component was already running in a separate
thread, but now they can actually run in parallel.
Changes the results of ffmpeg-fix_sub_duration_heartbeat - tested by
JEEB to be more correct and deterministic.
Partially fixes ticket #798
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Peter Ross <pross@xvid.org>
Fix rendering of int values within a side data element, which was
broken since commit d2d3a83ad9, where the side data element was
correctly marked as a variable fields element. Logic to render a
string variable was implemented already, but it was not implemented
for the int fields path, which was enabled by that commit.
Also, code and schema is changed in order to account for multiple
variable-fields elements - such as side data, contained within the
same parent. Previously it was assumed that a single variable-fields
element was contained within the parent, which was the case for tags,
but is not the case for side-data.
Previously data was rendered as:
<side_data_list>
<side_data side_data_type="CPB properties" max_bitrate="0" min_bitrate="0" avg_bitrate="0" buffer_size="327680" vbv_delay="-1"/>
</side_data_list>
Now as:
<side_data_list>
<side_data type="CPB properties">
<side_datum key="side_data_type" value="CPB properties"/>
<side_datum key="max_bitrate" value="0"/>
<side_datum key="min_bitrate" value="0"/>
<side_datum key="avg_bitrate" value="0"/>
<side_datum key="buffer_size" value="49152"/>
<side_datum key="vbv_delay" value="-1"/>
</side_data>
</side_data_list>
Variable-fields elements are rendered as a containing element wrapping
generic key/values elements, enabling use of strict XML schema.
Fix trac issue:
https://trac.ffmpeg.org/ticket/10613
It is badly named (should have been -top_field_first, or at least -tff),
underdocumented and underspecified, and (most importantly) entirely
redundant with the setfield filter.
Add demuxer to probe raw vvc and parse vvcc byte stream format.
Co-authored-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
I've been sitting on this for 3 1/2 years now(!), and I finally got
around to fixing the loose ends and convincing myself that it was
correct. It follows the same basic structure as yadif_cuda, including
leaving out the edge handling, to avoid expensive branching.
James Almer
Marth64
Anton Khirnov
Haihao Xiang
Connor Worley
Thilo Borgmann
Nuo Mi
Stefano Sabatini
Vittorio Giovara
Wu Jianhua
Lena
Paul B Mahol
Peter Ross
Fei Wang
Steven Liu
Elias Carotti
Zhao Zhili
Thomas Siedel
Tomas Härdin
Philip Langdale
Dawid Kozinski