mpegaudiodec_template.c uses stuff from mpegaudiodata directly,
yet this dependency was only indirectly fulfilled via mpegaudio-headers
before 33e6d57f01. Since this commit,
the latter only needs (and therefore provides) mpegaudiotabs,
leading to compilation failures.
This commit adds this missing direct dependency directly.
(Sorry for not having checked indirect dependencies.)
Found-by: Zane van Iperen <zane@zanevaniperen.com>
Reviewed-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The string for AV_OPT_TYPE_STRING AVOption gets freed by av_opt_free()
when closing the AVCodecContext
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK checks Data.V when using system memory for VP9 encoding. This
fixed the error below:
$ ffmpeg -qsv_device /dev/dri/renderD129 -f lavfi -i yuvtestsrc -c:v
vp9_qsv -f null -
[vp9_qsv @ 0x55b8387cbe90] Error during encoding: NULL pointer (-2)
Video encoding failed
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The test /libavutil/tests/hwdevice checks that when deriving a device
from a source device and then deriving back to the type of the source
device, the result is matching the original source device, i.e. the
derivation mechanism doesn't create a new device in this case.
Previously, this test was usually passed, but only due to two different
kind of flaws:
1. The test covers only a single level of derivation (and back)
It derives device Y from device X and then Y back to the type of X and
checks whether the result matches X.
What it doesn't check for, are longer chains of derivation like:
CUDA1 > OpenCL2 > CUDA3 and then back to OpenCL4
In that case, the second derivation returns the first device (CUDA3 ==
CUDA1), but when deriving OpenCL4, hwcontext.c was creating a new
OpenCL4 context instead of returning OpenCL2, because there was no link
from CUDA1 to OpenCL2 (only backwards from OpenCL2 to CUDA1)
If the test would check for two levels of derivation, it would have
failed.
This patch fixes those (yet untested) cases by introducing forward
references (derived_device) in addition to the existing back references
(source_device).
2. hwcontext_qsv didn't properly set the source_device
In case of QSV, hwcontext_qsv creates a source context internally
(vaapi, dxva2 or d3d11va) without calling av_hwdevice_ctx_create_derived
and without setting source_device.
This way, the hwcontext test ran successful, but what practically
happened, was that - for example - deriving vaapi from qsv didn't return
the original underlying vaapi device and a new one was created instead:
Exactly what the test is intended to detect and prevent. It just
couldn't do so, because the original device was hidden (= not set as the
source_device of the QSV device).
This patch properly makes these setting and fixes all derivation
scenarios.
(at a later stage, /libavutil/tests/hwdevice should be extended to check
longer derivation chains as well)
Reviewed-by: Lynne <dev@lynne.ee>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Tested-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
libplacebo supports automatic dolby vision application, but it requires
us to switch to a new API. Also add some logic to strip the dolby vision
metadata from the output frames in any case where we end up changing the
colorimetry.
The libplacebo dependency bump is justified because neither 184 nor 192
are part of any stable libplacebo release, so users have to build from
git anyways for this filter to exist.
Signed-off-by: Niklas Haas <git@haasn.dev>
- No longer mixes u8 and u16 component accesses (this was UB)
- De-duplicated 8->16 conversion
- De-duplicated component -> plane+offset conversion
- De-duplicated planar + packed RGB
- No longer calls ff_fill_rgba_map
- Removed redundant comp_mask data member
- RGB0 and related formats no longer write an alpha value to the 0 byte
- Non-planar YA formats now work correctly
- High-bit-depth semi-planar YUV now works correctly
Same outputs, but computed instead of statically known, so new formats will be
supported more easily. Asserts in place to ensure we update this if we add
anything incompatible with its logic.
As suggested by Andreas Rheinhardt, most code of v210 demuxer is common code
which is duplicated from rawvideodec, so it's better to move v210/v210x
demuxer code to rawvideodec.c and reuse the common code.
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Please reproduced with the following minimal configure command:
./configure --enable-shared --disable-all --enable-avcodec --enable-decoder=h264 --enable-hwaccel=h264_videotoolbox
You'll get below error:
Undefined symbols for architecture x86_64:
"_ff_videotoolbox_vpcc_extradata_create", referenced from:
_videotoolbox_start in videotoolbox.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Reported-by: Cameron Gutman <aicommander@gmail.com>
Tested-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
MPEG-1 only supports 4:2:0, so one can optimize away the checks
for whether one encodes MPEG-1 in codepaths that encode 4:2:2.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_mpeg1_encode_mb() contains two inlined calls to
mpeg1_encode_mb_internal(); these calls are supposed
to inline the properties depending upon the color space
used. Yet inlining vertical chroma subsampling (which
allows to remove complete branches and blocks depending
upon them) has been forgotten.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
encode_mb() calls encode_mb_internal() three times, once
for each supported chroma format. The reason for this is
that some chroma format dependent parameters can then be
inlined as encode_mb_internal() is marked as av_always_inline.
Yet the most basic parameters based upon chroma format have
not been inlined: The chroma format itself and the chroma
subsampling parameters. This commit does so.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Forgotten in cf1e0786ed.
(Both mpegvideodec as well as mpegvideoenc use me_cmp,
so this doesn't affect them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to remove the spurious dependencies of mpegvideo encoders
on error_resilience; some other components that do not use mpegvideo
to its fullest turned out to not need it either.
Adding a new CONFIG_EXTRA needs a reconfigure to take effect.
In order to force this a few unnecessary headers from lavfi/allfilters.c
have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
An AVCodecContext's private data is always allocated
in avcodec_open2() and calling avcodec_flush_buffers()
on an unopened AVCodecContext (or an already closed one)
is not allowed (and will crash before the decoder's flush
function is even called).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is partially possible if it is inlined whether
we deal with MPEG-1/2, because no_rounding is never set
for MPEG-1/2.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Whether lowres is in use or not is inlined in
mpv_reconstruct_mb_internal(), so one can use the fact
that lowres is always zero during encoding to evaluate
the checks for whether one is encoding or not at compile-time
when one is in lowres mode.
Also reorder the main check to check for whether it is an encoder
first to shortcircuit it in the common case of a decoder.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The very first check in this if-else if-else if construct is
"if (s->encoding ||", i.e. in case of the WMV2 encoder the else
branches are never executed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The a53_cc option is only useful and meaningful for MPEG-2,
yet it was accidentally added for all mpegvideo-based encoders.
This means that it is possible for a53_cc to be set for other
encoders as well.
This commit changes this and reroutes a53_cc to the dummy field
in MpegEncContext for all codecs for which it is not supported.
This allows to avoid a check for the current codec in mpeg12enc.c.
Also add a compile-time check for whether the MPEG-2 encoder is
available while at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Pierre-Anthony Lemieux
Andreas Rheinhardt
Haihao Xiang
Soft Works
Niklas Haas
rcombs
Limin Wang