when split flv file by flv format at first, and cat flvs file
into one flv file, the flv sequence end is be used,
then the whole flv have many flv sequence end TAG.
this flags can give user an option to ignore write sequence end TAG
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add FLVFlags type, be used to add new FLVFlags options
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is mostly useful for muxers that wrap other muxers, such as dashenc
and segment. The actual duplicated bitstream filtering is largely harmless,
but delaying the header can cause problems when the muxer intended the header
to be written to a separate file.
ffmpeg have a generic solution working with all muxer named
output_ts_offset, output_ts_offset will instead of initial_offset
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Actual allocation size is computed as (count + 1)*sizeof(meta_keys), so
we need to check that (count + 1) won't cause overflow.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes regressions with stream copy and output timebase/fps being twice as fine as needed
Makes the timebase and ticks per frame handled identical which should make the
code easier to understand and work with. It does not solve the problem without
st->codec access
Suggested-by: Hendrik Leppkes
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously, we used a different list of checks when deciding whether to
write a set of tags at all than we did when deciding whether to write an
individual tag in the set. This resulted in sometimes writing an empty
tag master and seekhead. Now we use mkv_check_tag_name everywhere, so
if a dictionary is entirely composed of tags we skip, we don't write a
tag master at all.
This affected the test file, since "language" was on one list but not
the other, so we were writing an empty tag master there. The test hash
is updated to reflect that change.
This patch is a fix for the bug with ticket number 5812
(https://trac.ffmpeg.org/ticket/5812).
Basically, the bug is that the last segment and the "#EXT-X-ENDLIST"
tag are not being written to the subtitle playlist file when
converting a file with subtitles to the HLS format. The reason for
this seem to be that the filename for the subtitle file is being freed
too early. This solution is simply to free that memory after it's last
use in the "hls_window" function.
Signed-off-by: Franklin Phillips <franklinphillips9p8@inbox.lv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes it's useful to be able to define the exact track numbers in
the generated track, instead of always beginning at track id 1. Using
the option use_stream_ids_as_track_ids now copies the use stream ids
to track ids. Dynamically generated tracks (ie. tmcd) have their track
numbers defined as continuing from the highest numbered stream id.
Signed-off-by: Erkki Seppälä <erkki.seppala.ext@nokia.com>
Signed-off-by: OZOPlayer <OZOPL@nokia.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When use append_list mode, the hls_init_time set nouse,
Because the append_list only support append at the old m3u8 end
cannot set init segments durations at the middle of the list.
That's invalid. and show a warning message for user.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
cyrpto allows reading of data which has been aes-128-cbc encrypted given a key and an iv. But it did not handle filetypes which require seeking... e.g. it failed on an encrypted .mp4 file.
example:
take 25.mp4 created with:
ffmpeg -f lavfi -i sine=frequency=1000:beep_factor=2:r=48000:duration=720.0 -f lavfi -i testsrc=duration=720.0:rate=25 -vcodec libx264 -cmp 22 -timecode 10:00:00:00 -r 25 -y out\25.mp4
encrypt with:
openssl enc -aes-128-cbc -K 12345678901234567890123456789012 -iv 12345678901234567890123456789012 -in 25.mp4 -out 25.enc
then to transcode in ffmpeg:
ffmpeg -key 12345678901234567890123456789012 -iv 12345678901234567890123456789012 -i crypto:25.enc -vcodec mpeg4 -r 25 -y 25dec.mp4
prior to this modification, the transcode would fail.
Note also: crypto previously maked both reads and writes as streamed, which caused the whole file
to be read before the transcode started. Now, for read only, if the underlying layer is not marked as streamed,
then crypto is not. This should enable efficient reading of encrypted containers which require seeking.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
the current implementation reads in chunks of 149x16=2384 bytes.
Seems more logical for it to read in chunks of 4096
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
A number of new pix_fmts have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA*
10-, 12-, 14-, and 16-bit GRAY variants*
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY*
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
recover segments duration time by hls_time after init hls window.
This is reuqested by Ibrahim Tachijian
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
av_log() expects its first parameter to be a pointer to a struct whose
first element is a pointer to an AVClass. In what I can only imagine is
a typo, one call to av_log() in the AAX decryption code instead passes
a pointer to an AVSHA struct, which doesn't even contain a pointer as
its first element, much less a pointer to an AVClass. Change the call to
pass the current MOVContext, as surrounding calls do.
The incorrect AVClass was causing mpv to emit the warning "av_log
callback called with bad parameters" when playing an .aax file.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use proper ISO 8601 timestamps which also signal that they are in UTC.
This changes the format of creation_time and modification_date metadata values
from 2016-06-01 22:30:00 to 2016-01-01T22:30:00.000000Z
Fixes ticket #5673.
Signed-off-by: Marton Balint <cus@passwd.hu>
Milliseconds is the de-factor precision for timestamps in
Matroska/WebM media.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Now force_codec_ids supports AVMEDIA_TYPE_DATA and
avformat_query_codec accepts data codecs as well in addition to video,
audio and subtitle tracks.
Signed-off-by: Erkki Seppälä <erkki.seppala.ext@nokia.com>
Signed-off-by: OZOPlayer <OZOPL@nokia.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Restore original timestamps in write_packet() if the
actual write operation was not successfull. This allows
to pass the same packet to nonblocking muxer repeatedly
without corrupting the timestamps.
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 049fdf78565f1ce5665df236d90f8657/asan_heap-oob_10a5a97_1026_42f9d4855547329560f385768de2f3fb.wtv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When ffmpeg exit by exception, start a new ffmpeg will
cover the old segment list, add this flag can continue
append the new segments into old hls segment list
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>