The demuxer doesn't fill the defaults if the master isn't present.
This results in codecpar->color_space being set with a value of
zero (RGB) on such files.
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts parts of c16582579b. The hard
coded 30 seconds are a lot, and finishing the seek can takes several
seconds when the source is on a network share. Remove this code
entirely, because it does more bad than good.
(Commit message provided by committer, based on the original messages
by the patch author.)
Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Using the decode interrupt feature of ffmpeg may cause crashes by
accessing previously freed pointers in matroska_read_close.
To prevent this reset nb_elem to zero after freeing the elements,
because ffmpeg normally tests for nb_elem.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The code assumes that s->streams[0] is valid.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the value is negative then it means padding at the start of the packet
instead of at the end.
Based on a patch by Hendrik Leppkes.
Reviewed-by: James Zern <jzern-at-google.com@ffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
This way it's more clear what the default values refer to, as
Undetermined/Unspecified is 0 for some, 2 for others.
Signed-off-by: James Almer <jamrial@gmail.com>
The problem was introduced in commit 1273bc6.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The code works just fine regardless of unit, so only make sure DisplayUnit
is not "unknown".
Found-by: Nicolas George <george@nsup.org>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
A missing DisplayUnit element or one with the default value of 0 means
DisplayWidth and DisplayHeight should be interpreted as pixels.
The current code setting st->sample_aspect_ratio is wrong when DisplayUnit
is anything else.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
Use proper ISO 8601 timestamps which also signal that they are in UTC.
This changes the format of creation_time and modification_date metadata values
from 2016-06-01 22:30:00 to 2016-01-01T22:30:00.000000Z
Fixes ticket #5673.
Signed-off-by: Marton Balint <cus@passwd.hu>
When seeking a file where codec delay is greater than 0, the timecode
can become negative after offsetting by the codec delay. Failing to cast
to a signed int64 will cause the check against skip_to_timecode to evaluate
true for these negative values. This breaks the "skip_to" seek mechanism.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Mkvtoolnix stores the sample rate of the original stream as reported by the
"OpusHead" stream header instead of 48kHz, the actual sample rate of the Opus
stream.
Ignoring the stored sample rate and forcing 48kHz preserves the correct initial
padding when remuxing such files.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Check if the size is written the first 4 bytes and read the next 4
as fourcc candidate, fallback checking the initial for 4 bytes.
"The CodecPrivate contains all additional data that is stored in the
'stsd' (sample description) atom in the QuickTime file after the
mandatory video descriptor structure (starting with the size and FourCC
fields)"
CC: libav-stable@libav.org
Adding early support for a subset of the proposed colour elements
according to the latest version of spec:
https://mailarchive.ietf.org/arch/search/?email_list=cellar&gbt=1&index=hIKLhMdgTMTEwUTeA4ct38h0tmE
I've left out elements for pix_fmt related things as there still
seems to be some discussion around these, and the max_cll/max_fall
are currently not propagated as there is not yet side data for them.
The new elements are exposed under strict experimental mode.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Use av_realloc() rather than av_malloc() when normalizing noncompliant
private data in get_qt_codec().
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch adds a new static function get_qt_codec() that takes care of
the initial retrieval of the fourcc and codec ID for A_QUICKTIME and
V_QUICKTIME. It also normalizes noncompliant private data found in some
older files that incorrectly starts with the fourcc by expanding/shifting
the data by 4 bytes, and storing the data size at the start. This is
necessary in order for the rest of the code in the A_QUICKTIME and
V_QUICKTIME blocks (and most likely other code as well) to correctly
parse the private data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In many older QuickTime files, the audio format, or "fourcc", is
0x00000000. The QuickTime File Format Specification states the following
regarding this situation:
"This format descriptor should not be used, but may be found in some
files. Samples are assumed to be stored in either 'raw ' or 'twos'
format, depending on the sample size field in the sound description."
MPlayer handles this logic by itself, but FFmpeg/FFplay currently does
not.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Palettized QuickTime video in Matroska has hitherto not been recognized
whatsoever, and the "palette" used has been completely random.
The patch for matroskadec.c fixes this issue by adding a palette side
data packet in matroska_deliver_packet(), much in the same way as it's
done in mov.c.
Video samples for testing are available at
https://drive.google.com/open?id=0B3_pEBoLs0faWElmM2FnLTZYNlk.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
matroskaenc applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
matroskaenc.c applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec.c
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Unrecognized streams are not allocated
Fixes: flicker-1.color1.vp91447030769.08.webm
Found-by: Chris Cunningham <chcunningham@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
John Stebbins
James Almer
Rainer Hochecker
Michael Schenk
Andreas Cadhalpun
Diego Biurrun
Anton Khirnov
Sophia Wang
Marton Balint
Chris Cunningham
Michael Niedermayer
Luca Barbato
Neil Birkbeck
Mats Peterson
Carl Eugen Hoyos
Aaron Colwell
Clément Bœsch
Hendrik Leppkes