FFmpeg

Commit Graph

Author	SHA1	Message	Date
Ronald S. Bultje	a451324ddd	vp9: ignore reference segmentation map if error_resilience flag is set. Fixes ffvp9_fails_where_libvpx.succeeds.webm. Bug-Id: ffmpeg/3849. Signed-off-by: Anton Khirnov <anton@khirnov.net>	8 years ago
Carl Eugen Hoyos	c19830aa2c	rscc: Support palette format Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>	8 years ago
Vittorio Giovara	b8d5070db6	avcodec: Document AV_PKT_DATA_PALETTE side data type	8 years ago
Mark Thompson	5a5df90d9c	vaapi_h265: Add main 10 encode support	8 years ago
Mark Thompson	b8cac1e830	vaapi_h265: Fix buffering parameters A decoder may need this to be set correctly to output frames in the right order.	8 years ago
Mark Thompson	fc30a90898	vaapi_h265: Fix slice header writing This was not observed earlier because the only syntax element which it normally misses with the current setup is slice_qp_delta, but that is always going to be zero (in IDR frames QP isn't varied on the slice) which will always exp-golomb code as a single 1 bit. The immediately following part is the byte alignment, which is always a 1 bit followed by 0s which are ignored, so as long as the bitstream is never aligned at that point we will never notice because the only difference is that an ignored bit is a 1 instead of a 0.	8 years ago
Mark Thompson	ec17ab381e	vaapi_h264: Write bitstream restriction fields	8 years ago
Mark Thompson	17a0f9481c	vaapi_h264: Fix CFR mode with frame_rate set in AVCodecContext	8 years ago
Mark Thompson	314b421dd8	vaapi_encode: Decide on GOP setup before initialising sequence parameters This was always too late; several fields related to it have been incorrectly zero since the encoder was added.	8 years ago
Anton Khirnov	59c7022740	pthread_frame: use atomics for frame progress	8 years ago
Anton Khirnov	64a31b2854	pthread_frame: use atomics for PerThreadContext.state	8 years ago
Anton Khirnov	db2733256d	pthread_frame: use a thread-safe way for signalling threads to die Current code uses a plain int in a racy way, which is UB.	8 years ago
Anton Khirnov	8385ba53f1	mmaldec: convert to stdatomic	8 years ago
Luca Barbato	b015872c0d	huffyuvdsp: Enable the altivec code for PPC little-endian as well Confirmed to work by checkasm.	8 years ago
Luca Barbato	1d25a86902	huffyuvdsp: Reenable PPC optimizations	8 years ago
Anton Khirnov	5bf2454e7c	h264dec: support broken files with mp4 extradata/annex b data Bug-Id: 966	8 years ago
Justin Ruggles	b57e38f52c	ac3dsp: x86: Replace inline asm for in-decoder downmixing with standalone asm Adds a wrapper function for downmixing which detects channel count changes and updates the selected downmix function accordingly. Simplification and porting to current x86inc infrastructure by Diego Biurrun. Signed-off-by: Diego Biurrun <diego@biurrun.de>	8 years ago
Justin Ruggles	a9ba59591e	ac3dsp: Add some special-case handling for the C downmix function This is about 200% faster for in-decoder downmixing of 5.0 and 5.1 content. Signed-off-by: Diego Biurrun <diego@biurrun.de>	8 years ago
Justin Ruggles	43717469f9	ac3dsp: Reverse matrix in/out order in downmix() Also use (float *) instead of (float ()[2]). This matches the matrix layout in libavresample so we can reuse assembly code between the two. Signed-off-by: Diego Biurrun <diego@biurrun.de>	8 years ago
Hendrik Leppkes	8d1267932c	x86/h264_weight: use appropriate register size for weight parameters This fixes decoding corruption on 64 bit windows. Signed-off-by: Martin Storsjö <martin@martin.st>	8 years ago
Diego Biurrun	2caa93b813	mpegaudiodsp: Change type of array stride parameters to ptrdiff_t This avoids SIMD-optimized functions having to sign-extend their stride argument manually to be able to do pointer arithmetic.	8 years ago
Diego Biurrun	15b4f494fc	mss*: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar.	8 years ago
Diego Biurrun	a339e919ca	ea: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar.	8 years ago
Diego Biurrun	ba479f3daa	hevc: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar.	8 years ago
Diego Biurrun	e4a94d8b36	h264chroma: Change type of stride parameters to ptrdiff_t This avoids SIMD-optimized functions having to sign-extend their stride argument manually to be able to do pointer arithmetic.	8 years ago
Diego Biurrun	2ec9fa5ec6	idct: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar.	8 years ago
Diego Biurrun	b2939a7527	blockdsp: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar.	8 years ago
Diego Biurrun	3281d823cd	intrax8: Change type of array stride parameters to ptrdiff_t ptrdiff_t is the correct type for array strides and similar. Also rename all such parameters to "stride" for consistency.	8 years ago
Diego Biurrun	92c5755a18	hpeldsp: arm: Update comments left behind in `25841dfe80`	8 years ago
Diego Biurrun	009adfd4fb	x86: fpel: Remove unnecessary sign extend	8 years ago
Mark Thompson	956a54129d	vaapi_h264: Set max_num_ref_frames to 1 when not using B frames	8 years ago
Mark Thompson	086e4b58b5	vaapi_encode: Sync to input surface rather than output While outwardly bizarre, this change makes the behaviour consistent with other VAAPI encoders which sync to the encode /input/ picture in order to wait for /output/ from the encoder. It is not harmful on i965 (because synchronisation already happens in vaRenderPicture(), so it has no effect there), and it allows the encoder to work on mesa/gallium which assumes this behaviour.	8 years ago
Mark Thompson	892bbbcdc1	vaapi_encode: Check packed header capabilities This improves behaviour with drivers which do not support packed headers, such as AMD VCE on mesa/gallium.	8 years ago
Mark Thompson	80a5d05108	vaapi_encode: Refactor initialisation This allows better checking of capabilities and will make it easier to add more functionality later. It also commonises some duplicated code around rate control setup and adds more comments explaining the internals.	8 years ago
Anton Khirnov	7bf8db4db6	tdsc: use the new decoding API	8 years ago
Anton Khirnov	de2ae3c1fa	lavc: add clobber tests for the new encoding/decoding API	8 years ago
Anton Khirnov	68811a41c7	mpegvideo_enc: use the new encoding API for b_strategy=2	8 years ago
Anton Khirnov	f03f78bc1c	mpegvideo_enc: handle encoding errors with b_strategy=2	8 years ago
Anton Khirnov	6f733ecab6	mpegvideo_enc: add const to the AVCodec instance	8 years ago
Yogender Gupta	70de2ea426	nvenc: Extended rate-control support as provided by SDK 7 Signed-off-by: Luca Barbato <lu_zero@gentoo.org> Signed-off-by: Diego Biurrun <diego@biurrun.de>	8 years ago
Yogender Gupta	358c887a9f	nvenc: Add support for high bitdepth Signed-off-by: Luca Barbato <lu_zero@gentoo.org> Signed-off-by: Diego Biurrun <diego@biurrun.de>	8 years ago
Yogender Gupta	e02e2515b2	nvenc: Add some easier to understand presets that match x264 terminology Signed-off-by: Luca Barbato <lu_zero@gentoo.org> Signed-off-by: Diego Biurrun <diego@biurrun.de> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>	8 years ago
Luca Barbato	352741b5ea	nvenc: Make sure that enum and array index match And use a macro to reduce the boilerplate. Signed-off-by: Luca Barbato <lu_zero@gentoo.org> Signed-off-by: Diego Biurrun <diego@biurrun.de> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>	8 years ago
Anton Khirnov	12004a9a7f	audiodsp/x86: yasmify vector_clipf_sse	8 years ago
Anton Khirnov	683da86aab	audiodsp: reorder arguments for vector_clipf This will make the x86 asm simpler. ARM conversion by Martin Storsjö <martin@martin.st> and Janne Grunau <janne-libav@jannau.net>	8 years ago
Anton Khirnov	bf58545aac	audiodsp: fix vector_clipf documentation The x86 version processes 16 floats per iteration, so len must be a multiple of 16.	8 years ago
Anton Khirnov	eea9857bfd	blockdsp: drop the high_bit_depth parameter It has no effect, since the code is supposed to operate the same way for any bit depth.	8 years ago
Anton Khirnov	75d98e30af	audiodsp/x86: clear the high bits of the order parameter on 64bit Also change shl to add, since it can be faster on some CPUs. CC: libav-stable@libav.org	8 years ago
Anton Khirnov	1d6c76e11f	audiodsp/x86: fix ff_vector_clip_int32_sse2 This version, which is the only one doing two processing cycles per loop iteration, computes the load/store indices incorrectly for the second cycle. CC: libav-stable@libav.org	8 years ago
Yogender Gupta	de64dd13cb	avcodec: Add the extended pixel format profile for HEVC It is supported by the NVIDIA video SDK 7. Signed-off-by: Luca Barbato <lu_zero@gentoo.org>	8 years ago

... 2 3 4 5 6 ...

21218 Commits (c5e01d91702b082ac1b5c2101f1d84dd5017e4ad)