decorrelate_ls, _rs and _ms are decorrelate[1], [2] and [3] respectively.
The code ended up testing indep ([0]) as twice, ms never, and misnaming
the other two.
Current code tracks min/max pts for each stream separately; then when
the file ends it combines them with last frame's duration to compute the
total duration of each stream; finally it selects the longest of those
durations as the file duration.
This is incorrect - the total file duration is the largest timestamp
difference between any frames, regardless of the stream.
Also change the way the last frame information is reported from decoders
to the muxer - previously it would be just the last frame's duration,
now the end timestamp is sent, which is simpler.
Changes the result of the fate-ffmpeg-streamloop-transcode-av test,
where the timestamps are shifted slightly forward. Note that the
matroska demuxer does not return the first audio packet after seeking
(due to buggy interaction betwen the generic code and the demuxer), so
there is a gap in audio.
The tested functions treat s_m[i] == 0 as a special case. Other than
that, the functions are slightly complicated vector additions.
This actually makes the zero case happen pseudorandomly.
PGMYUV seems to be always limited range. This was a format originally
invented by FFmpeg at a time when YUVJ distinguished limited from full
range YUV, and this codec never appeared to output YUVJ in any
circumstance, so hard-coding limited range preserves the status quo.
The other formats are explicitly documented to be full range RGB/gray
formats. That said, don't tag them yet, due to outstanding bugs w.r.t
grayscale formats and color range handling.
This change in behavior updates a bunch of FATE tests in trivial ways
(added tagging being the only difference).
These are not supported by the drawing functions at all, and were
incorrectly advertised as supported in the past.
Note: This check is added only to separate the logic change from the API
change in the following commit, and will be removed again after it
becomes redundant.
Mapping to ITU-R BS.2051-3 "Sound System J" and ITU-R BS.1196-8 "Channel
Configuration 19".
Signed-off-by: Will Wolcott <wwolcott@netflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This layout maps to ITU-R BS.2051-3 "Sound System C" and ITU-R BS.1196-8 "Channel
Configuration 14", and it being the first layout with top layer channels, it's
best to use a different scheme to properly convey the presence and amount of said
channels.
The new name will also be a better fit for the additions in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
Fix rendering of int values within a side data element, which was
broken since commit d2d3a83ad9, where the side data element was
correctly marked as a variable fields element. Logic to render a
string variable was implemented already, but it was not implemented
for the int fields path, which was enabled by that commit.
Also, code and schema is changed in order to account for multiple
variable-fields elements - such as side data, contained within the
same parent. Previously it was assumed that a single variable-fields
element was contained within the parent, which was the case for tags,
but is not the case for side-data.
Previously data was rendered as:
<side_data_list>
<side_data side_data_type="CPB properties" max_bitrate="0" min_bitrate="0" avg_bitrate="0" buffer_size="327680" vbv_delay="-1"/>
</side_data_list>
Now as:
<side_data_list>
<side_data type="CPB properties">
<side_datum key="side_data_type" value="CPB properties"/>
<side_datum key="max_bitrate" value="0"/>
<side_datum key="min_bitrate" value="0"/>
<side_datum key="avg_bitrate" value="0"/>
<side_datum key="buffer_size" value="49152"/>
<side_datum key="vbv_delay" value="-1"/>
</side_data>
</side_data_list>
Variable-fields elements are rendered as a containing element wrapping
generic key/values elements, enabling use of strict XML schema.
Fix trac issue:
https://trac.ffmpeg.org/ticket/10613
Always use the functionality of the latter, which makes more sense as it
avoids losing keyframes due to vsync code dropping frames.
Deprecate the 'source_no_drop' value, as it is now redundant.
This is no longer needed as the side data is available for decoders in the
AVCodecContext.
The tests affected reflect the removal of useless CPB and Stereo 3D side
data in packets.
Signed-off-by: James Almer <jamrial@gmail.com>
The changed references for fate-hevc-dv-rpu fate-mov-zombie happen because,
unlike ffmpeg and ffplay, ffprobe never injected packet side data, so the
display matrix side data at the container level is now present in the output
frames.
Signed-off-by: James Almer <jamrial@gmail.com>
Also, avoid spurious end-of-line after side data entries, and improve
rendering of compact output, by adding an indication of the side data
type for each entry.
Also fixes issue:
http://trac.ffmpeg.org/ticket/9266
In this case any timestamps are guessed by compute_pkt_fields() in
libavformat. Since we are decoding the stream, we have more accurate
information from the decoder and do not need any guesses.
Eliminates spurious PTS gaps in a number of FATE tests.
Also avoids dropping the majority of frames in fate-dirac*
We have to write an explicit BlockDuration element (and use
a BlockGroup instead of a SimpleBlock) in case the Track
has a DefaultDuration that is inconsistent with the duration
of the packet.
The matroska-h264-remux test uses a file with coded fields
where the duration of a Block is the duration of a field,
not of a frame, therefore this patch writes said BlockDuration
elements.
(When using a BlockGroup, one has to add ReferenceBlock elements
to distinguish keyframes from non-keyframes. Unfortunately,
the AV1 codec mapping [1] requires us to reference all references
and to really use the real references, which requires a lot of
effort for basically no gain. When BlockGroups are used with AV1,
the created files are most likely invalid, both before and after
this patch, but this patch makes this more likely to happen.)
[1]: https://github.com/ietf-wg-cellar/matroska-specification/blob/master/codec/av1.md
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This already avoids unnecessary indirectly included headers
in the arch-specific vf_bwdif_init.c files; it is also in
preparation for splitting the actual functions out of vf_bwdif.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
From the documentation of GNU awk [1]:
"In most awk implementations, including gawk, rand() starts generating
numbers from the same starting number, or seed, each time you run awk.45
Thus, a program generates the same results each time you run it. The
numbers are random within one awk run but predictable from run to run.
This is convenient for debugging, but if you want a program to do
different things each time it is used, you must change the seed to a
value that is different in each run. To do this, use srand()."
This commit does exactly this.
[1]: https://www.gnu.org/software/gawk/manual/html_node/Numeric-Functions.html#index-rand_0028_0029-function
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Instead use float one by default for sample rate conversions.
The s16p internal transfer format produces visible and hearable
quantization artifacts.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
for S8 we continue to use S16 as it should have enough precision
Fate is adjusted so bitexactness is maintained between mips/arm/x86
if more tests became bit-inexact on some platform, the same change
can be done to them
The use of higher precision and float intermediates inevitably
leads to more differences between platforms.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is badly named (should have been -top_field_first, or at least -tff),
underdocumented and underspecified, and (most importantly) entirely
redundant with the setfield filter.
Not every user of idctdsp.h wants to initialize an IDCTDSPContext;
e.g. the proresdsp only uses ff_init_scantable_permutation()
and the IDCT permutation enum; similarly for cavsdsp and wmv2dsp.
Using a forward declaration here avoids an avcodec.h dependency
in the relevant files.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And remove the AVOID_PROBING flag, given it's the last av1 decoder to be tested
either way.
This fixes a regression introduced in 1652f2492f,
where even if forcing the native av1 decoder, if another decoder was present,
like libdav1d or libaom-av1, they'd be used for probing and some fate tests
would have different results.
Signed-off-by: James Almer <jamrial@gmail.com>
Rémi Denis-Courmont
Anton Khirnov
Niklas Haas
Marvin Scholz
James Almer
Will Wolcott
Stefano Sabatini
Zhao Zhili
Andreas Rheinhardt
Paul B Mahol
Fei Wang