In function ff_h264_add_pixels4_8_mmi, there is no need to reset '%[ftmp0]'
to 0, because it's value has never changed since the start of the asm block.
This patch remove the redundant 'xor' and set src to zero once it was loaded.
In function ff_h264_idct_add_8_mmi, 'block' is seted to zero twice.
This patch removed the first setting zero operation and move the second one
after the load operation of block.
In function ff_h264_idct8_add_8_mmi, 'block' is seted to zero twice too.
This patch just removed the second setting zero operation.
This patch mainly simplifies the implementation of functions above,
the effect on the performance of whole h264 decoding process is not obvious.
According to the perf data, proportion of ff_h264_idct_add_8_mmi decreased from
0.29% to 0.26% and ff_h264_idct8_add_8_mmi decreased from 0.62% to 0.59% when decoding
H264 format on loongson 3A3000(For reference only , not very stable.).
Reviewed-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Replace STnxm_UB and LDnxm_SH with new macros ST_{H/W/D}{1/2/4/8}.
The old macros are difficult to use because they don't follow the same parameter passing rules.
Changing details as following:
1. remove LD4x4_SH.
2. replace ST2x4_UB with ST_H4.
3. replace ST4x2_UB with ST_W2.
4. replace ST4x4_UB with ST_W4.
5. replace ST4x8_UB with ST_W8.
6. replace ST6x4_UB with ST_W2 and ST_H2.
7. replace ST8x1_UB with ST_D1.
8. replace ST8x2_UB with ST_D2.
9. replace ST8x4_UB with ST_D4.
10. replace ST8x8_UB with ST_D8.
11. replace ST12x4_UB with ST_D4 and ST_W4.
Examples of new macro: ST_H4(in, idx0, idx1, idx2, idx3, pdst, stride)
ST_H4 store four half-word elements in vector 'in' to pdst with stride.
About the macro name:
1) 'ST' means store operation.
2) 'H/W/D' means type of vector element is 'half-word/word/double-word'.
3) Number '1/2/4/8' means how many elements will be stored.
About the macro parameter:
1) 'in0, in1...' 128-bits vector.
2) 'idx0, idx1...' elements index.
3) 'pdst' destination pointer to store to
4) 'stride' stride of each store operation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
addi/daddi are deprecated by MIPS for years, and MIPS r6 remove
them.
They should be replace with addiu:
ADDIU performs the same arithmetic operation but
does not trap on overflow.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In function ff_dct_unquantize_mpeg2_intra_mmi,
addr0 shoudn't be changed before storage operation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2%(2.39x to 2.44x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_bi_h_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.1%(2.34x to 2.39x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_epel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32.
This optimization improved HEVC decoding performance 1.7%(2.30x to 2.34x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_uni_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 2.7%(2.24x to 2.30x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11.4%(2.01x to 2.24x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_qpel_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11%(1.81x to 2.01x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimize put_hevc_pel_bi_pixels_8 with mmi in the case width=8/16/24/32/48/64.
This optimization improved HEVC decoding performance 2%(1.77x to 1.81x, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The AV_INPUT_BUFFER_PADDING_SIZE has been increased to 64, but the value is still 32
in function ff_hevc_sao_edge_filter_8_msa. So, use AV_INPUT_BUFFER_PADDING_SIZE directly.
Also, use MAX_PB_SIZE directly instead of 64. Fate tests passed.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Set initialization order of MSA after MMI to make it work on loongson platform(msa is supported by loongson2k、3a4000 etc.).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Remove invalid operation in the case x and y all equal 0,
this refine made about 2% speedup for H264 decode on loongson platform.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This optimization improved h264 decoding performance about 4%(from 74fps to 77fps, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Combined 1st and 2nd loop into one inline asm in function ff_vc1_inv_trans_8x8_mmi to
reduce memory operation, and made some small optimization in ff_vc1_inv_trans_4x8_mmi.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failed case: svq3-watermark
When minimum loop count of following functions are greater than parameter h passed to them, svq3-watermark failed.
1. ff_put_pixels4_8_mmi
2. ff_avg_pixels4_8_mmi
3. ff_put_pixels4_l2_8_mmi
4. ff_avg_pixels4_l2_8_mmi
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Constraint "g" means compiler can store variable in memory or register.
When we use constraint "g" for a variable and this variable was operated by
instruction which only support register operands may lead "invalid operands" error.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Simplify the usage of intermediate variable addr and remove unused variable all64
in following functions:
1. ff_put_pixels_clamped_mmi
2. ff_put_signed_pixels_clamped_mmi
3. ff_add_pixels_clamped_mmi
This optimization speed up mpeg4 decode about 2% on loongson platform(tested with 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Simplify the usage of intermediate variable addr in following functions:
1. ff_put_pixels4_8_mmi
2. ff_put_pixels8_8_mmi
3. ff_put_pixels16_8_mmi
4. ff_avg_pixels16_8_mmi.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failed case: mss2-wmv
In following functions, pmullh was used to multiply two 16-bit data, this will cause data overflow.
1. ff_vc1_inv_trans_8x8_dc_mmi
2. ff_vc1_inv_trans_8x8_mmi
3. ff_vc1_inv_trans_8x4_mmi
4. ff_vc1_inv_trans_4x8_mmi
5. ff_vc1_inv_trans_4x4_mmi
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Optimized memset with mmi in following functions:
1. ff_h264_add_pixels4_8_mmi.
2. ff_h264_idct_add_8_mmi.
3. ff_h264_idct8_add_8_mmi.
This optimization improved h264 decoding performance about 1.3%(tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reoptimize function ff_put_h264_chroma_mc8_mmi and ff_avg_h264_chroma_mc8_mmi.
Performance of h264 decoding improved about 5%(from 69fps to 73fps, tested on loongson 3A3000).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Performance of mpeg4 decoding improved about 23%(from 128fps to 158fps, tested on loongson 3A3000).
Reoptimized following functions with mmi.
1. ff_simple_idct_put_8_mmi
2. ff_simple_idct_add_8_mmi
3. ff_simple_idct_8_mmi
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In commit 975a1a8,function ff_vc1_h_s_overlap_mmi was refactored,
but the declaration in libavcodec/mips/vc1dsp_mips.h was unchanged.
Change-Id: I90beae683511622a0cc1130ab1660ac8669ec3ef
Signed-off-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Reviewed-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The overlap filter is not correct for vertical edges in frame interlaced
I and P pictures. When filtering macroblocks with different FIELDTX values,
we have to match the lines at both sides of the vertical border. In addition,
we have to use the correct rounding values, depending on the line we are
filtering.
Signed-off-by: Jerome Borsboom <jerome.borsboom@carpalis.nl>
Use mask buffer.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use mask buffer.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Use immediate unsigned saturation for clip to max saving one vector register.
Remove unused macro.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Remove unused macro and table.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Align the mask buffer to 64 bytes.
Load the specific destination bytes instead of MSA load and pack.
Remove unused macros and functions.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Use immediate unsigned saturation for clip to max saving one vector register.
Remove unused macro.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use global mask buffer for appropriate mask load.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Load the specific destination bytes instead of MSA load and pack.
Remove unused macros and functions.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Remove loops and unroll as block sizes are known.
Load the specific destination bytes instead of MSA load and pack.
Remove unused macro and functions.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Pack the data to half word before clipping.
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Replace generic with block size specific function.
Load the specific destination bytes instead of MSA load and pack.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Shiyou Yin
YunQiang Su
gxw
Jerome Borsboom
Kaustubh Raste