In particular, add the missing dependency on the scale and
aresample filters (and therefore on libswscale resp. libswresample).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, add the missing dependency on the scale filter
(and therefore on libswscale).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a parameter that allows to add additional requirements.
Also add FILE_PROTOCOL to all the auxiliary functions
that use a demuxer.
Also fix the requirements for the fate-mpegts-probe-(latm|program)
tests. They have misused DEMDEC.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, add the missing dependency on the scale filter
(and therefore on libswscale).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also fix the requirements of fate-mov-channel-description:
It needs the pcm_s16le decoder and the mov demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And drop the FATE_CAF_REMUX variables which only existed
to avoid having to repeat the common FILE_PROTOCOL PIPE_PROTOCOL
FRAMECRC_MUXER stuff.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It also adds the missing depenencies on the file and pipe protocols
and the framecrc muxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The test also requires a png decoder, which often can be disabled in
cross building setups, where zlib might be missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
We re-use the PNGEncContext.zstream for deflate-related operations.
Other than that, the code is pretty straightforward. Special care needs
to be taken to avoid writing more than 79 characters of the profile
description (the maximum supported).
To write the (dynamically sized) deflate-encoded data, we allocate extra
space in the packet and use that directly as a scratch buffer. Modify
png_write_chunk slightly to allow pre-writing the chunk contents like
this.
Also add a FATE transcode test to ensure that the ICC profile gets
encoded correctly.
Signed-off-by: Niklas Haas <git@haasn.dev>
Calculate Spatial Info (SI) and Temporal Info (TI) scores for a video, as defined
in ITU-T P.910: Subjective video quality assessment methods for multimedia
applications.
Note that the benchmarking results for these functions are highly dependent
upon the input data. Therefore, each function is benchmarked twice,
corresponding to the best and worst case complexity of the reference C
implementation. The performance of a real stream decode will fall somewhere
between these two extremes.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
The range parameters need to be set up before calling
sws_init_context (which selects which fastpaths can be used;
this gets called by sws_getContext); solely passing them via
sws_setColorspaceDetails isn't enough.
This fixes producing full range YUV range output when doing
YUV->YUV conversions between different YUV color spaces.
Signed-off-by: Martin Storsjö <martin@martin.st>
The sample mpeg4/mpeg4_sstp_dpcm.m4v existed in the FATE-suite,
but it was surprisingly unused.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This long-existing feature calculates subtitle durations by keeping
it around until the following subtitle is decoded, and then utilizes
the following subtitle's pts as the end point of the previous one.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Peeking into the muxing queue can improve the estimate of
the lowest timestamp needed for avoid_negative_ts in case
the lowest timestamp is in a packet other than the first packet
to be muxed.
This fixes tickets #4536 and #5784 as well as the output from
the matroska-avoid-negative-ts FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
write_packet() has code to shift the packets timestamps
to make them nonnegative or even make them start at ts zero;
this code inspects every packet that is written and if a packet
with negative timestamp (whether this is dts or pts depends upon
another flag; basically: Matroska uses pts, everyone else dts)
is encountered, this is offset to make the timestamp zero.
All further packets will be offset accordingly (with the offset
converted according to the streams' timebases).
This is based around an assumption, namely that the timestamps
are indeed non-decreasing, so that the first packet with negative
timestamps is the first packet with timestamps. This assumption
is often fulfilled given that the default interleavement function
by default interleaves per dts; yet there are scenarios in which
it may not be fulfilled:
a) av_write_frame() instead of av_interleaved_write_frame() is used.
b) The audio_preload option is used.
c) When the timestamps that are made nonnegative/zero are pts
(i.e. with Matroska), because the packet with the smallest dts
is not necessarily the packet with the smallest pts.
d) Possibly with custom interleavement functions.
In these cases the relative sync of the first few packet(s) is offset
relative to the later packets. This contradicts the documentation
("When shifting is enabled, all output timestamps are shifted by
the same amount").
Therefore this commit changes this: As soon as the first packet
with valid timestamps is output, it is checked and recorded whether
the timestamps need to be shifted. Further packets are no longer
checked for needing to be offset; instead they are simply offset.
In the cases above this leads to packets with negative timestamps
(and the appropriate warnings) instead of desync. This will mostly
be fixed in the next commit.
This commit also factors handling the avoid_negative_ts stuff out
of write_packet() in order to be able to return immediately.
Tickets #4536 and #5784 as well as the matroska-avoid-negative-ts-test
are examples of c); as has been said, some timestamps are now negative,
yet the ref file update does not show it because ffmpeg.c sanitizes
the timestamps (-copyts disables it; ffprobe and mkvinfo also show
the original timestamps).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This tests the issue from tickets #4536, #5784;
the output of this test is currently broken.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Tests the parsing and writing of AVDOVIDecoderConfigurationRecord,
when it is present as a Dolby Vision configuration block addition mapping.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To trigger this bug, use `paletteuse=dither=bayer:bayer_scale=0`; you will see
that adjacent pixel lines will use the same dither pattern, instead of being
shifted from each other by 32 units (0x20).
One way to demostrate the bug is:
$ convert -size 64x256 gradient:black-white -rotate 270 grad.png
$ echo 'P2 2 1 255 0 255' > bw.pnm
$ ffmpeg -i grad.png -filter_complex 'movie=bw.pnm,scale=256x1[bw]; [0:v][bw]paletteuse=dither=bayer:bayer_scale=0' gradbw.png
Previously: https://www.rm.cloudns.org/img/uploaded/0bd152c11b9cd99e5945115534b1bdde.png
Now: https://www.rm.cloudns.org/img/uploaded/89caaa5e36c38bc2c01755b30811f969.png
This was caused by passing inconsistent color vs (a,r,g,b) parameters to
color_get(), and NBITS being 5 meaning actually hitting the same cache node
does happen in this case, but ONLY if bayer_scale is zero.
The fix is passing the correct color value to color_get().
Also added a previous-failing FATE test; image comparison of the first frame:
Previously: https://www.rm.cloudns.org/img/uploaded/d0ff9db8d8a7d8a3b8b88bbe92bf5fed.png
Now: https://www.rm.cloudns.org/img/uploaded/a72389707e719b5cd1c58916a9e79ca8.png
(on this less synthetic test image, the bug basically causes noise from cache
hits vs misses)
Tested: FATE passes, which exercises this filter but at the default bayer_scale.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt
Thilo Borgmann
Martin Storsjö
Niklas Haas
Marton Balint
James Almer
Boris Baracaldo
Ben Avison
Paul B Mahol
Pierre-Anthony Lemieux
Michael Niedermayer
Vittorio Giovara
Limin Wang
Jan Ekström
quietvoid
Rudolf Polzer
