F and D extensions are included in all RISC-V application profiles ever
made (so starting from RV64GC a.k.a. RVA20). Realistically they need to be
selected at compilation time.
Currently, there are no consumers for these two flags. If there is ever a
need to reintroduce F- or D-specific optimisations, we can always use
__riscv_f or __riscv_d compiler predefined macros respectively.
This preserves T1 whilst calling the instrumented function. In a Sci-Fi
setting where type-based Control Flow Integrity (CFI) is supported, the
calling code (i.e., the `checkasm` test case) will set T1 to the expected
value of the landing pad label (LPL) of the instrumented function.
The call wrapper will always use LPL zero which is a wild card. We should
preserve the value of T1 at least until the indirect call to the
instrumented function. Of course this is Sci-Fi, because:
1) there is no hardware (or even QEMU) support yet,
2) all our assembler functions currently use LPL zero anyway.
This uses T3 rather than T2 because indirect branches with T2 is reserved
for notionally direct calls made with an indirect call instruction (e.g.
due to GOT indirection), and are exempted from forward-edge CFI checks.
The B extension was finally ratified in May 2024, encompassing:
- Zba (addresses),
- Zbb (basics) and
- Zbs (single bits).
It does not include Zbc (base-2 polynomials).
Increase the tolerance from 10 ulp to 11 ulp. This fixes occasional
errors for some inputs; the errors could be reproduced on
aarch64/neon builds, with "checkasm --test=ac3dsp 3446175925".
Signed-off-by: Martin Storsjö <martin@martin.st>
This test confirms that we can write mDCv and cLLi chunks and read them
back via the png decoder. It uses an HEVC conformance sample with this
metadata as the base source for the side data in the frames.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Reported-by: Jan Ekström <jeebjp@gmail.com>
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This lets us detect when a container has flagged a stream as multilayer.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not pass an options dictionary to the avcodec_open2() in enc_open().
This is cleaner and more robust, as previously various bits of code
would try to interpret the contents of the options dictionary, with
varying degrees of correctness. Now they can just access the encoder
AVCodecContext directly.
Cf. 372c78dd42 - analogous change for
decoding.
A non-progressive field order is now written on the container level in
interlaced ProRes encoding tests.
Perform av_clip_int16(val) _after_ copying the value to last_dc.
This change ensures that clipping is applied only within the context of
the current block, preventing the propagation of clipped values to
subsequent DC components.
Related commits: c28f648b19 and dffae122d0
Related ticket: 4683
This avoids hardcoding any implementation-specific limitiations as
part of the API, and allows for future expandability.
This also allows API users to more conveniently convert the
values into floats without hardcoding specific conversion constants.
The API was committed a few days ago, so changing this field now
is within the realms of acceptable.
This allows ending up with a normal, non-fragmented file when
the file is finished, while keeping the file readable if writing
is aborted abruptly at any point. (Normally when writing a
mov/mp4 file, the unfinished file is completely useless unless it
is finished properly.)
This results in a file where the mdat atom contains (and hides)
all the moof atoms that were part of the fragmented file structure
initially.
Signed-off-by: Martin Storsjö <martin@martin.st>
ffprobe is meant to generate parseable output, and if a field is present, it
should be printed even if it has a default value.
Signed-off-by: James Almer <jamrial@gmail.com>
These tables are supposed to contain the number of bits needed
to encode a given (run, level) pair. Yet the number of bits
for pairs needing the escape code was wrong (it only contained
the escape code and not the bits needed for run and level).
Furthermore, H.261 (a format with explicit end-of-block codes)
does not work well together with the RLTable API from rl.c:
The EOB code is the first one in ff_h261_rl_tcoeff's VLC table
and has a run value of zero. Therefore the result of get_rl_index()
is off by one for run == 0 and level values with explicit
(run, level) pair.
Fixing this necessitated changing the ref files of the
vsynth*-h261-trellis tests. Both filesizes as well as PSNR
decreased. If one used a qscale value of 11 for this test,
one would have received files with about the same size as
before this patch (with qscale 12), but with better PSNR.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Not every function will be set, so zero the context
to initialize everything.
This also allows to remove an initialization in dvenc.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MECmpContext.ildct_cmp is an array of function pointers that
are not set by ff_me_cmp_init(), but that are set by users
to one of the other arrays via ff_set_cmp().
Remove these pointers from MECmpContext and add pointers
for the actually used functions to its users. (The DV encoder
already did so.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MECmpContext has several arrays of function pointers that
are not set by ff_me_cmp_init(), but that are set by users
to one of the other arrays via ff_set_cmp().
One of these other users is mpegvideo_enc; it is the only user
of MECmpContext.frame_skip_cmp and it only uses one of these
function pointers at all.
This commit therefore moves this function pointer to MpegEncContext;
and removes the array from MECmpContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MECmpContext has several arrays of function pointers that
are not set by ff_me_cmp_init(), but that are set by users
to one of the other arrays via ff_set_cmp().
One of these other users is the motion estimation API.
It uses MECmpContext.(me_pre|me|me_sub|mb)_cmp. It is
basically the only user of these arrays.
This commit therefore moves these arrays to MotionEstContext;
this has the additional advantage of making motion_est.c
more independent from MpegEncContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Before After
-------------------------------------------------
make fate-vvc CPU Time (No ASM) 131.52s 134.83s
libavcodec/vvc/* Line Coverage 95.3% 96.9%
inter_template.c Line Coverage 74.3% 88.2%
inter.c Line Coverage 85.3% 99.2%
Signed-off-by: Frank Plowman <post@frankplowman.com>
Otherwise a bunch of SEI units that should not be in hvcC will be included,
and generate different output with builds where extract_extradata_bsf is not
present.
Signed-off-by: James Almer <jamrial@gmail.com>
The check should be >= 0, not > 0. The check itself is redundant
since uninit only being called after init is success.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
James Almer
Rémi Denis-Courmont
Anton Khirnov
Niklas Haas
Martin Storsjö
Leo Izen
Felicia Lim
Derek Buitenhuis
Rajiv Harlalka
Ramiro Polla
Nuo Mi
Lynne
Pierre-Anthony Lemieux
Andreas Rheinhardt
Frank Plowman
Zhao Zhili